Abstract:Global carbon dioxide emissions are rising and the use of fossil fuels in several sectors are the leading causes. As global population and economies continue to grow significantly, the most practical method of lowering such emissions is to capture CO2. Although other technologies are more developed, adsorption is very promising and has attracted much attention. To ensure this technology's success, it is essential to have suitable CO2 adsorbent materials. In this work, several new hydrotalcites (HTs) with different initial concentrations of ion precursors were prepared for the first time by the co-precipitation method—it was possible to verify that the ion concentrations influence the characteristics of the materials. The prepared HTs were characterized by thermogravimetric analysis (TG), X-Ray diffraction (XRD), surface area measurements and temperature-programmed desorption of CO2 (TPD-CO2) to relate their CO2 capture capacity to their physicochemical properties; the CO2 adsorption equilibrium isotherms were determined at 35 and 300 °C for the prepared samples, as well as for some commercial materials: magnesium oxide, calcium oxide, aluminium oxide and Zeolite 13X. After determining which materials present the best CO2 adsorption capacity, these were submitted to adsorption-desorption cycles to study their stability. The main objective of the work was to prepare and study different CO2 adsorbents for processes that are carried out at low and intermediate temperatures. From the experimental results, it was possible to conclude that the Zeolite 13X showed the best capacity at 35 °C, 3.38 mmol·g−1 (@= 1 bar), and a prepared calcined HT (c-HT2) was the best at 300 °C, 0.97 mmol·g−1 (@= 1 bar). Moreover, it seems there is an optimum initial concentration of the ions' solutions for the tested HTs, which depends on the final application—c‐HT1 showed a better capacity at 35 °C and c‐HT2 at 300 °C. From the adsorption‐desorption cycles—performed at 35 and 300 °C with the best materials using a magnetic suspension microbalance at 1 bar of CO2 partial pressure —, a working cyclic capacity of 2.69 mmol∙g−1 was achieved by the Zeolite at 35 °C; in turn, c-HT2 showed a working cyclic capacity of 0.79 mmol∙g−1 at 300 °C.

PRELIMINARY STUDY ON PERFORMANCE OF Zn-DOPED ZEOLITE IN LOW-TEMPERATURE CO2 ADSORPTION

Preparation and Characterization of Materials for Low- to Intermediate-Temperature CO2 Adsorption

Enhancement of Carbon Dioxide Adsorption Over Alkali-cations Borosilicate ZSM-5 Zeolite

Performance Evaluation of Static and Dynamic CO2 Adsorption from Synthetic Gas Condensates Using Zinc Oxide, Silicon Dioxide and Zeolite 13X

CO2 adsorption study of the zeolite imidazolate framework (ZIF-8) and its g-C3N4 composites

An Assessment of Zeolite Framework Effect for Low-Temperature NOX Adsorbers

Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

Preparation of ZSM-5 molecular sieve modified by kaolin and its CO2 adsorption performance investigation

Polyethyleneimine Entwine Thermally-Treated Zn/Co Zeolitic Imidazolate Frameworks to Enhance CO2 Adsorption

N/S co-doped microporous zeolite-templated carbon for efficient CO 2 adsorption and separation

Growth Study of Hierarchical Pore SSZ-13 Molecular Sieves with Improved CO2 Adsorption Performance

Controllable Preparation of Cubic Zeolite A and Application of Langmuir Model in Carbon Dioxide Adsorption

Study on Zinc-Modified Adsorbent for Adsorption of Trace CO2 in Electronic Special Gas BF3

Investigating the synergistic effects of various amine groups on Zeolite-Y for CO2 capture

Synthesis of NaY Zeolite and their CO<sub>2</sub> Adsorption Properties

Synthesis of Zeolite 4A from Kaolin and Its Adsorption Equilibrium of Carbon Dioxide

The Influence of Mg, Na, and Li Oxides on the CO2 Sorption Properties of Natural Zeolite

Study On the Adsorption Performance of Zeolite Molecular Sieve for CO2

Density functional theory study of high-temperature CO2 adsorption by Li2ZrO3: Effect of typical flue gas components on adsorption energy and electronic properties

Synthesis of Zeolite-Templated Carbonaceous Materials Doped With Nitrogen for Carbon Dioxide Adsorption