Abstract:PT. XYZ is a company engaged in the business of white crystal sugar with raw sugar cane in Jombang. As the industrial world develops, companies are required to produce products both in terms of quality and quantity. Therefore, the production process has the potential to experience work accidents. To minimize this from happening, this research identified the potential hazards of work accidents in the production division. The methods used are the Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) methods. Using the FMEA method produced 3 potential hazards with the highest RPN values namely potential for exposed hot ashes at the boiler station with an RPN of 33,716. In second place is the potential collapse of the crane at the mill station with RPN 27,192. Then in third place is the potential Explosion of pipes and tanks at the evaporation station with an RPN value of 23.549. With the FTA method, the 3 potential hazards that have been obtained are used as top events and an analysis is carried out to find out the root causes of the potential accidents that occur. The analysis is grouped from human, equipment, and environmental aspects. From the human factor, it is known that the cause was workers who were not concentrating, were negligent, and did not comply with SOPs. The equipment factor comes from the age of the old tool and lack of maintenance. As well as environmental factors, namely high temperature pressure and humidity which can have an impact on corrosion of iron equipment. So that the suggestions that can be given to companies are imposing sanctions on employees who do not comply with the rules, providing job training according to their respective fields, and scheduling regular machine maintenance.

ERGONOMIC RISK LEVEL OF FITTING PRODUCTION DEPARTMENT WORKERS IN THE PLASTIC PIPE MANUFACTURING INDUSTRY

Managing ergonomic risk assessment among assembly operators in the small‐scale fabrication sector

Design of Table and Chairs for Packaging Tempe Chips Work Station for Reducing the Risk of Occupational Diseases in Putra Tunggal Home Industry Wonosobo

Analysis of the Potential Hazards of Work Accidents Department of Production Using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) Methods in PT. XYZ

Physical Load and Preventive Measures in Metal Manufacturing Industry

ANALISIS RISIKO ERGONOMI PENJAHIT BERDASARKAN JENIS KELAMIN DI KOTA BATAM

Application of Hazard and Operability Study Methods (HAZOP) to asses and control hazard risk in spinning department using at textile industrial

The Industrial Ergonomics Approach Influences Workforce Fatigue and Health and Increases Productivity

Comparison of ergonomic risk assessment output in a repetitive sawmill occupation: Trim-saw operator

Ergonomic Risk, Muscle Tension, Lactic Acid, and Work Performance on Transport Workers at Fish Auction

Proposed Improvements to Reduce the Risk Work Accidents on CV HB with FMEA and HAZOP Method

Potential hazards and risk identification of safety and health in iron fabrication area of building construction project

Data-Driven Ergonomic Risk Assessment of Complex Hand-intensive Manufacturing Processes

Hazard identification in fabrication industry using Hazard Identification and Risk Assessment (HIRA) and Job Safety Analysis (JSA)

Development of risk assessment tool for foundry workers

Designing a lifting tool work using SNQ and anthropometry

Investigation on musculoskeletal discomfort and ergonomics risk factors among production team members at an automotive component assembly plant

Ergonomic Assessment of Sewing Machine Operators to Minimize Musculoskeletal Disorders

Application of SPC and FMEA Methods to Reduce the Level of Hollow Product Defects

Analysis of the Reduction of Ergonomic Risks through the Implementation of an Automatic Tape Packaging Machine

Work Safety Risk Analysis Using Hirarc Method In Iron Production Area PT. Java Rakindo