Abstract:AbstractThe Potential hazards that are poorly understood by workers but have a large risk of work accidents are the hazards of working in confined space. Based on the findings of researchers that work in confined spaces found unsafe conditions on the access stairs leading to the groundtank, the access ladder was not tied or not held, causing the stairs to move and workers who went down the stairs fell from a height. PT. X is a contractor (vendor) who usually does groundtank maintenance work. This study aims to identify the overall potential hazards of each stage or sequence in the work process carried out by workers during the maintenance of PT's A1 groundtank confined space. X in 2023 in order to prevent work accidents and occupational diseases (PAK). The method used in this study is the Job Safety Analysis (JSA) method. the results of identifying potential hazards related to occupational health and safety using the Job Safety Analysis (JSA) method on groundtank maintenance which includes the confined space area at Plant A1 PT. X, obtained 8 stages of the work process and 18 potential hazards including chemical hazards exposed to toxic gases and lack of oxygen, electrical hazards of electric shock, biological hazards from animal hazards, physical hazards of falling and slipping. From the potential hazards that exist, then recommendations for control efforts are carried out such as the provision and use of Personal Protective Equipment (PPE), the use of appropriate equipment and always check equipment before use, blower the groundtank area within 1 work shift, which is for 8 hours, atmospheric measurements in the groundtank to remove toxic gases.AbstrakPotensi bahaya yang kurang dipahami oleh pekerja namun memiliki risiko kecelakaan kerja yang besar adalah bahaya bekerja di ruang terbatas (confined space). Berdasarkan hasil temuan peneliti bahwa pekerjaan di confined space ditemukan adanya kondisi tidak aman atau unsafe condition pada tangga akses menuju dalam groundtank, tangga akses tersebut tidak diikat maupun tidak dipegangi sehingga menyebabkan tangga bergerak dan pekerja yang menuruni tangga tersebut terjatuh dari ketinggian. PT. X adalah sebuah kontraktor (vendor) yang biasa melakukan pekerjaan perawatan groundtank. penelitian ini bertujuan untuk mengidentifikasi potensi bahaya secara keseluruhan dari setiap tahapan atau urutan pada proses pekerjaan yang dilakukan oleh pekerja saat perawatan confined space groundtank A1 PT. X tahun 2023 agar dapat mencegah kecelakan kerja maupun penyakit akibat kerja (PAK). Metode yang digunakan pada penelitian ini adalah metode Job Safety Analysis (JSA). hasil identifikasi potensi bahaya yang terkait dengan Kesehatan dan keselamatan kerja dengan menggunakan metode Job Safety Analysis (JSA) pada perawatan groundtank yang termasuk area confined space di Plant A1 PT.X, didapatkan 8 tahapan proses pekerjaan dan 18 potensi bahaya diantaranya bahaya kimia terpapar gas beracun dan kekurangan oksigen, bahaya electrical tersengat arus listrik, bahaya biologi dari animal hazard, bahaya fisik terjatuh dan terpleset. Dari potensi bahaya yang ada, berikutnya dilakukan rekomendasi upaya pengendalian seperti penyediaan dan penggunaan Alat Pelindung Diri (APD), penggunaan peralatan yang layak dan selalu dilakukan pemeriksaan peralatan sebelum digunakan, melakukan pembloweran pada area groundtank dalam jangka waktu 1 shift kerja yaitu selama 8 jam, pengukuran atmosfer dalam groundtank untuk menghilangkan gas beracun.

Analysis of the Potential Hazards of Work Accidents Department of Production Using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) Methods in PT. XYZ

Application of failure mode effect analysis on hazard identification and risk control

ANALISIS KINERJA KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PROSES PRODUKSI SAUS DENGAN METODE FAULT TREE ANALYSIS

Application of Hazard and Operability Study Methods (HAZOP) to asses and control hazard risk in spinning department using at textile industrial

Proposed Improvements to Reduce the Risk Work Accidents on CV HB with FMEA and HAZOP Method

Production risk management of prawn crackers using fuzzy FMEA and fuzzy AHP methods

Risk identification and decision-making analysis in lower-ranking coal handling: A FMEA and AHP

An Analysis of Work Accident Risk in the Construction of the RSUD ER Building West Lombok District Using Fault Tree Analysis (FTA)

Risk Mitigation Analysis and Safety Equipment Against Work Accident Prevention

Identifikasi Penyebab Kecelakaan Kerja Konstruksi Menggunakan Accident Root Cause Tracing Model (ARCTM) dan Fault Tree Analysis (FTA)

Hazard Factor Identification And Efforts To Control Work Accidents In Welding Activities In Tanks (Confined Space) At PT. Menubar Kaltim

Analysis of Potential Hazards Using the HIRADC Approach and Methods Job Safety Analysis on The Practical Process at The Department of Environmental Health

Work Safety Risk Analysis Using Hirarc Method In Iron Production Area PT. Java Rakindo

The Management of Medium Hazard Potential at Trimitra Sejati Jaya Ltd (Glue Production)

Potential hazards and risk identification of safety and health in iron fabrication area of building construction project

Occupational Accident Risk Analysis using Failure Mode and Analysis Method: A Case Study of X City Main Market Development Project

Analisis Potensi Bahaya K3 Confined Space PT.X pada Perawatan Groundtank menggunakan Metode Job Safety Analysis

Hazard identification in fabrication industry using Hazard Identification and Risk Assessment (HIRA) and Job Safety Analysis (JSA)

ERGONOMIC RISK LEVEL OF FITTING PRODUCTION DEPARTMENT WORKERS IN THE PLASTIC PIPE MANUFACTURING INDUSTRY

Innovative management for Occupational Safety and Health: A tower engineering project

Safety Application and Health Work (K3) At Department of CNC Lathe Using Hazard Identification Risk Assessment and Risk Control (HIRARC) Method (Case Study of PT. Swadaya Graha)