Abstract:The present study introduces a novel design of a portable, locally‐made solar‐powered cooler optimized for longer storage periods. The cooler's performance in terms of temperature distribution, airflow dynamics, and the coefficient of performance (COP) is meticulously examined through computational fluid dynamics (CFD) simulations. The simulated results were validated using experimental data from the open literature, ensuring accuracy and reliability. The efficacy of vaccine storage is significantly impacted by temperature fluctuations within the cooler, often exacerbated by using phase change materials in existing cooler designs for remote areas. These materials can undergo uneven melting and phase separation, leading to temperature instability and vaccine potency loss. In response to this challenge, the present study introduces a novel design of a portable, locally‐made solar‐powered cooler optimized for longer storage periods. The cooler's performance in terms of temperature distribution, airflow dynamics, and the coefficient of performance (COP) is meticulously examined through computational fluid dynamics (CFD) simulations. The simulated results were validated using experimental data from the open literature, ensuring accuracy and reliability. The findings indicate that the developed cooler achieves significant improvements over traditional models. For instance, the current model reaches a temperature of +12°C in just 84 min, compared to 208 min, as reported in the literature results. Moreover, the current model reaches a temperature of −12°C in 195 min and it has energy efficient with a COP of 4.5. Statistical analysis further confirms the reliability of the simulation results, with root mean square and mean absolute percentage errors of 6.587 and 24.2%, respectively. Additionally, a comparative study of five insulative materials highlights polyurethane (Po) as the top performer, with a heat transfer performance of 14.3%, followed by feather fiber (Fe) (18.7%), fly ash (Fl) (19.8%), fiberglass (Fi) (21.9%), and coconut fiber (Co) (25.9%). Notably, net present value (NPV) of 448.01 was obtained for economic analysis of the current model over the existing model, showing the feasibility of the study. Hence, the cooler's effectiveness in storing vaccines in isolated regions exceeds that of conventional models, providing a hopeful solution to tackle vital challenges in vaccine distribution and preservation.

Development of Evaporative Cooling System for Preservation of Tomato

Review on water evaporative cooling low-cost devices for tomato fruit preservation

Design and Development of a Solar PV Based Evaporative Cooled Transit Storage Unit for Horticultural Products

A transient performance evaluation of a porous evaporative cooler for preservation of fruits and vegetables

Evaluation of a new heat transfer and evaporative design for a zero energy storage structure

Physicochemical Quality Changes in Tomatoes during Delayed Cooling and Storage in a Controlled Chamber

Design of a Cold Storage with R507A Refrigerant for the Preservation of Twenty-Five Tons of Apples in the Ankara Province

Design of a Cooling System Integrated with Ultraviolet Light for Preservation of Fruits and Vegetables at Variable Tropical Weather Conditions: A Case Study of Arusha, Tanzania

Osmodehydrofreezing of Tomatoes: Optimization of Osmotic Dehydration and Shelf Life Modeling

Novel design and performance evaluation of an indirectly forced convection desiccant integrated solar dryer for drying tomatoes in Pakistan

Increasing the productivity and quality of cucumber crop by improving the performance of the evaporative cooling system

Design and performance analysis of portable solar powered cooler for vaccine storage

Selection of conventional preservation technologies using analytical hierarchy process

Controlled Atmosphere Storage of Tomato using Diffusion Channel System

Drying Kinetics and Performance Analysis of Thermal Storage-Based Hybrid Greenhouse Dryer for Uniform Drying of Tomato Flakes

Characterization of the “armored” Tomato from the Adamawa-Cameroon Region for Preservation Purpose

Exploring the potential of aloe vera gel-based coating for shelf life extension and quality preservation of tomato

Characterization and application of the nanocompiste packaging films containing clay and TiO2 on preservation of tomato fruit under cold storage

Determination of Performance of Different Pad Materials and Energy Consumption Values of Direct Evaporative Cooler

Some Engineering Factors Affecting Utilization of Solar Energy in Drying Tomato Fruits

Assessing thermal and economic performance of solar dryers in sustainable strategies for bottle gourd and tomato preservation