Abstract:In the last few decades, the problem of pollution resulting from human activities has pushed research toward zero or net-zero carbon solutions for transportation. The main objective of this paper is to perform a preliminary performance assessment of the use of hydrogen in conventional turbine engines for aeronautical applications. A 0-D dynamic model of the Allison 250 C-18 turboshaft engine was designed and validated using conventional aviation fuel (kerosene Jet A-1). A dedicated, experimental campaign covering the whole engine operating range was conducted to obtain the thermodynamic data for the main engine components: the compressor, lateral ducts, combustion chamber, high- and low-pressure turbines, and exhaust nozzle. A theoretical chemical combustion model based on the NASA-CEA database was used to account for the energy conversion process in the combustor and to obtain quantitative feedback from the model in terms of fuel consumption. Once the engine and the turbomachinery of the engine were characterized, the work focused on designing a 0-D dynamic engine model based on the engine's characteristics and the experimental data using the MATLAB/Simulink environment, which is capable of replicating the real engine behavior. Then, the 0-D dynamic model was validated by the acquired data and used to predict the engine's performance with a different throttle profile (close to realistic request profiles during flight). Finally, the 0-D dynamic engine model was used to predict the performance of the engine using hydrogen as the input of the theoretical combustion model. The outputs of simulations running conventional kerosene Jet A-1 and hydrogen using different throttle profiles were compared, showing up to a 64% reduction in fuel mass flow rate and a 3% increase in thermal efficiency using hydrogen in flight-like conditions. The results confirm the potential of hydrogen as a suitable alternative fuel for small turbine engines and aircraft.

Compact Heat Exchangers With Curved Fins for Hydrogen Turbofan Intercooling

Compact heat exchangers for hydrogen-fueled aero engine intercooling and recuperation

Compact Metallic High-Temperature Heat Exchangers

Generalized Method for the Conceptual Design of Compact Heat Exchangers

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

An Optimization Study on the Finned Tube Heat Exchanger Used in Hydride Hydrogen Storage System – Analytical Method and Numerical Simulation

The Optimization Design of a Compact Integrated Precooler for Advanced Space Launcher Engines

Conceptual design of a two-pass cross-flow aeroengine intercooler

Step-by-Step Evaluation of the Fuel Switch From Kerosene to Hydrogen On the Thermodynamic Cycle in Gas Turbine Engines

Transient Modeling and Performance Analysis of Hydrogen-Fueled Aero Engines

Integrative Thermodynamic Optimization of the Crossflow Heat Exchanger for an Aircraft Environmental Control System

Performance optimization for an advanced geared turbofan engine integrated with cooled cooling air heat exchangers

Hydrogen Thermal-Powered Aircraft Combustion and Propulsion System

Flow pattern analysis and multi-objective optimization of helically corrugated tubes used in the intermediate heat exchanger for nuclear hydrogen production

Design of a compact mesh-based high-effectiveness counter-flow heat exchanger and its integration in remote cooling systems

0-D Dynamic Performance Simulation of Hydrogen-Fueled Turboshaft Engine

A Novel Multilayer Fin Structure for Heat Transfer Enhancement in Hydride-Based Hydrogen Storage Reactor

Key Parameters Effects and Design on Performances of Hydrogen/helium Heat Exchanger for SABRE

Design of a Thermal Performance Test Equipment for a High-Temperature and High-Pressure Heat Exchanger in an Aero-Engine

Performance study on a printed circuit heat exchanger composed of novel airfoil fins for supercritical CO2 cycle cooling system

An Experimental Study on the Offset-Strip Fin Geometry Optimization of a Plate-Fin Heat Exchanger Based on the Heat Current Model