Abstract:The off-axis embedment behaviors of unidirectional and multidirectional laminated engineered bamboo panels used for glued-laminated bamboo (glubam) structures under dowel-type bolts with three different diameters, 12, 14, and 16 mm, were experimentally studied in this research. The half-hole loading method given by current standards was adopted to perform the embedment tests. Seven different off-axis loading directions from 0 degrees to 90 degrees related to the main bamboo fiber direction at an interval of 15 degrees in the panel plane were considered. The different failure patterns, stress-displacement curves, and the corresponding full-field surface strain measured through the digital image correlation (DIC) method are reported. The loading angles significantly influenced the embedment performance of unidirectional bamboo panel specimens, and the strength values decreased with the increasing off-axis loading angles. A difference of 35% in the strength values between 0 degrees and 90 degrees loading specimens was observed. However, quasi-isotropic embedment properties were noticed for the multidirectional laminated engineered bamboo panels. The capacity functions were provided to predict the mean off-axis embedment strength and characteristic strength values by inputting the characteristic density values into the functions. Compared with the characteristic strength values estimated through the statistical method, with a 95% probability of exceedance and 75% significant level, the conventional capacity-function method underestimated the off-axis embedment strength values, and thus may leading to an overconservative design. The statistical characteristic embedment strength values are suggested to be used to calibrate the safety factor of capacity equations given by wood standards. Results from this research can be used to predict the ultimate strength of glubam joints under complex loading conditions and obtain reliable design values for engineering applications.

Numerical Analysis of Push-out Specimens of Bamboo Scrimber-concrete Composite Structural Connectors

Bamboo Lightweight Shear Walls: Modeling and Identification of Sheathing-to-Framing Connections for Seismic Response Analysis

Experimental Research on Dowelled Connection of GluBam-Concrete Composite Beams

Connections Used for Cold-Formed Steel Frame Shear Walls Sheathed with Engineered Bamboo Panels

Experimental Studies on Bolted Glubam Connections

Experimental Research on Novel RPC-steel Composite Connections for Prefabricated Glubam-Concrete Composite Beams

EXPERIMENTAL RESEARCH ON NOTCHED CONNECTION FOR GLUBAM-CONCRETE COMPOSITE BEAMS

Mechanical Behavior of Glued Laminated Bamboo Moment-Resisting Connections

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

The Off-Axis Embedment Performance of Bamboo Panels Used for Glubam Structures

Experimental research and numerical analysis of shearing resistance in steel-concrete composite beam connectors

Experimental evaluation and theoretical modeling of eco-friendly bamboo scrimber-UHPC members with enhanced shear connectors

Compressive Failure Mechanism of Structural Bamboo Scrimber

Numerical Simulation of the Shear Capacity of a GFRP-Strengthened Natural Bamboo-Bolt Composite Joint

Mechanism Analysis and Design of Novel Tapered Iron Bolt Shear Connectors

Shear behaviour of I-shaped steel with bamboo scrimber composite beams

Experimental and numerical study of large high strength bolt shear connector embedded in HFRC

Shearing performances of the detachable prefabricated composite beams with different types of connectors

Feasibility and Performance of Novel Tapered Iron Bolt Shear Connectors in Demountable Composite Beams

Local buckling resistance of bamboo scrimber plates in compression

Behavior of an Advanced Bolted Shear Connector in Prefabricated Steel-Concrete Composite Beams