Abstract:The utilization of manufactured lightweight aggregates adds another dimension to the cost of the preparation of self-compacting concrete (SCC). The common practice of adding absorption water to the lightweight aggregates before concreting leads to inaccurate calculations of the water-to-cement ratio. Moreover, the absorption of water weakens this interfacial bond between aggregates and the cementitious matrix. A particular type of black volcanic rock with a vesicular texture known as scoria rocks (SR) is utilized. With an adapted sequence of additions, the occurrence of water absorption can be minimized to overcome the issue of calculating the true water content. In this study, the approach of preparing the cementitious paste first with adjusted rheology followed by the addition of fine and coarse SR aggregates enabled us to circumvent the need for adding absorption water to the aggregates. This step has improved the overall strength due to the enhanced bond between the aggregate and the cementitious matrix, rendering a lightweight SCC mix with a target compressive strength of 40 MPa at 28 days, which makes it appropriate for structural applications. Different mixes were prepared and optimized for the best cementitious system that achieved the goal of this study. The optimized quaternary cementitious system included silica fume, class F fly ash, and limestone dust as essential ingredients for low-carbon footprint concrete. The rheological properties and parameters of the optimized mix were tested, evaluated, and compared to a control mix prepared using normal-weight aggregates. The results showed that the optimized quaternary mix satisfied both fresh and hardened properties. Slump flow, T50, J-ring flow, and average V-funnel flow time were in the ranges of 790–800 mm, 3.78–5.67 s, 750–780 mm, and 9.17 s, respectively. Moreover, the equilibrium density was in the range of 1770–1800 kg/m3. After 28 days an average compressive strength of 42.7 MPa, a corresponding flexural load of over 2000 N, and a modulus of rupture of 6.2 MPa were obtained. The conclusion is then drawn that altering the sequence of mixing ingredients becomes a mandatory process with scoria aggregates to obtain high-quality lightweight concrete for structural applications. This process leads to a significant improvement in the precise control of the fresh and hardened properties, which was unachievable with the normal practice used with lightweight concrete.

Self-compacting concrete with reduced formwork pressures

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Synergizing Portland Cement, high-volume fly ash and calcined calcium carbonate in producing self-compacting concrete: A comprehensive investigation of rheological, mechanical, and microstructural properties

Lightweight SCC Development in a Low-Carbon Cementitious System for Structural Applications

Assessment of Rational Design of Self-Compacting Concrete Incorporating Fly Ash and Limestone Powder in Terms of Long-Term Durability

Design And Preparation Of Self-Compacting Concrete For Pre-Stressed Mass Concrete Structures

The Effect of Low Velocity Impact Loading on Self-Compacting Concrete Reinforced with Carbon Fiber Reinforced Polymers

Experimental study on self compacting concrete with large amount of supplementary cementitious material

Investigation of self-compacting concrete utilizing different supplementary pozzolanic materials for cement replacement

Properties of SCC containing pozzolans, Wollastonite micro fiber, and recycled aggregates

Study on Self Compacting Geopolynmer Concrete

Design and Preparation of High Elastic Modulus Self-Compacting Concrete for Pre-Stressed Mass Concrete Structures

Effects of fly ash and limestone powder on the paste rheological thresholds of self-compacting concrete

Experimental Study of Low Cement Dosage Self-Compacting Concrete Mix Design

Assessment of fluidity retention, mechanical strength and cost production of blended cement self-compacting concrete using the concept of a performance index

Effects of SCMs Particles on the Compressive Strength of Micro-Structurally Designed Cement Paste: Inherent Characteristic Effect, Particle Size Refinement Effect, and Hydration Effect

Properties of Sustainable Self-Compacting Concrete containing Activated Jute Fiber and Waste Mineral Powders

Effect of the Paste Coating Layer and Mortar Coating Layer on the Properties of Fresh Self-Compacting Concrete

Enhancing sustainability in self-compacting concrete by optimizing blended supplementary cementitious materials

Rheological properties of self-compacting concrete paste containing chemical admixtures

The Possibility of Producing Self-Compacting Lightweight Concrete by Using Expanded Polystyrene Beads as Coarse Aggregate