Abstract:Wood-based composites are increasingly used in the industry not only because of the shortage of solid wood, but above all because of the better properties, such as high strength and aesthetic appearance compared to wood. Medium-density fiberboard (MDF) is a wood-based composite that is widely used in the furniture industry. In this work, an attempt was made to predict the surface roughness of the machined MDF in the milling process based on acceleration signals from an industrial piezoelectric sensor installed in the cutting zone. The surface roughness parameter Sq was adopted for the evaluation and measurement of surface roughness. The surface roughness prediction was performed using a radial basis function (RBF) artificial neural network (ANN) and a Takagi-Sugeno--Kang (TSK) fuzzy model with subtractive clustering. In the research, as inputs to the ANNs and fuzzy model, the kinematic parameters of the cutting process and selected measures of the acceleration signal were adopted. At the output, the values of the surface roughness parameter Sq were obtained. The results of the experiments show that the surface roughness is influenced not only by the kinematic parameters of the cutting, but also by the vibrations generated during the milling process. Therefore, by combining information on the cutting kinematics parameters and vibration, the accuracy of the surface roughness prediction in the milling process of MDF can be improved. The use of TSK fuzzy modelling based on the subtractive clustering method for integrating the information from many acceleration signal measurements in the examined range of cutting conditions meant the surface roughness was predicted with high accuracy and high reliability. With the help of two tested artificial intelligence tools, it is possible to estimate the surface roughness of the workpiece with only a small error. When using a radial neural network, the root mean square error for estimating the value of the Sq parameter was 0.379 μm, while the estimation error based on fuzzy logic was 0.198 μm. The surface of the sample made with the cutting parameters vc = 76 m/min and vf = 1200 mm/min is characterized by a less concentrated distribution of ordinate densities, compared to the surface of the sample cut with lower feed rates but at the same cutting speed. The most concentrated distribution of ordinate density (for the cutting speed vc = 76 m/min) is characterized by the surface, where the feed rate value was vf = 200 mm/min, with 90% of the material concentrated in the profile height of 28.2 μm. When using an RBF neural network, the RMSE of estimating the value of the Sq parameter was 0.379 μm, while the estimation error based on fuzzy logic was 0.198 μm.

A Machine Learning Approach to Predict Properties of Wood Products during Milling

Predicting wood moisture classes by sound frequency spectra and Explainable Machine Learning during milling

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

A Physics-Informed Machine Learning Model for Surface Roughness Prediction in Milling Operations

Machine learning-enabled early prediction of dimensional accuracy for complex products of investment casting

Employing machine learning algorithm for properties of wood ceramics prediction: A case study of ammonia nitrogen adsorption capacity, apparent porosity, surface hardness and burn-off for wood ceramics

Wood Material Recognition for Industrial Applications

The Use of a Radial Basis Function Neural Network and Fuzzy Modelling in the Assessment of Surface Roughness in the MDF Milling Process

An Acoustical Machine Learning Approach to Determine Abrasive Belt Wear of Wide Belt Sanders

Machine learning applied to property prediction of metal additive manufacturing products with textural features extraction

Efficient Milling Quality Prediction with Explainable Machine Learning

Using machine learning to predict paperboard properties – a case study

Roughness Prediction of End Milling Surface for Behavior Mapping of Digital Twined Machine Tools

Application of Machine Learning Algorithms for Tool Condition Monitoring in Milling Chipboard Process

Wood planer control: Predictive and prescriptive approaches via Automatic State Matching Gaussian processes

A machine learning case study with limited data for prediction of carbon fiber mechanical properties

Accurate Prediction of Microstructure of Composites using Machine Learning

An effective LSSVM-based approach for milling tool wear prediction

Milling Surface Roughness Prediction Based on Physics-Informed Machine Learning

A hybrid deep learning model for robust prediction of the dimensional accuracy in precision milling of thin-walled structural components

Tool Health Monitoring of a Milling Process Using Acoustic Emissions and a ResNet Deep Learning Model