Abstract:There is an increasing trend in the industry of knowing in real-time the condition of their assets. In particular, tool wear is a critical aspect, which requires real-time monitoring to reduce costs and scrap in machining processes. Traditionally, for the purpose of predicting tool wear conditions in machining, mathematical models have been developed to extract the information from the signal of sensors attached to the machines. To reduce the complexity of developing physical models, where an in-depth knowledge of the system being modelled is required, the current trend is to use machine-learning (ML) models based on data from the tool wear. The acoustic emission (AE) technique has been widely used to capture data from and understand the real-time condition of industrial assets such as cutting tools. However, AE signal interpretation and processing is rather complex. One of the most common features extracted from AE signals to predict the tool wear is the counts parameter, defined as the number of times that the amplitude of the signal exceeds a predefined threshold. A recurrent problem of this feature is to define the adequate threshold to obtain consistent wear prediction. Additionally, AE signal bandwidth is rather wide, and the selection of the optimum frequencies band for feature extraction has been pointed out as critical and complex by many authors. To overcome these problems, this paper proposes a methodology that applies multi-threshold count feature extraction at multiresolution level using wavelet packet transform, which extracts a redundant and non-optimal feature map from the AE signal. Next, recursive feature elimination is performed to reduce and optimize the vast number of predicting features generated in the previous step, and random forests regression provides the estimated tool wear. The methodology presented was tested using data captured when turning 19NiMoCr6 steel under pre-established cutting conditions. The results obtained were compared with several ML algorithms such as k-nearest neighbors, support vector machines, artificial neural networks and decision trees. Experimental results show that the proposed method can reduce the predicted root mean squared error by 36.53%.

Machine-learning for automatic prediction of flatness deviation considering the wear of the face mill teeth

An Intelligent Prediction of Surface Roughness on Precision Grinding

Artificial intelligence for automatic prediction of required surface roughness by monitoring wear on face mill teeth

Roughness prediction using machine learning models in hard turning: an approach to avoid rework and scrap

In-process Tool Wear Prediction System Based on Machine Learning Techniques and Force Analysis

A Novel Machine Learning-Based Methodology for Tool Wear Prediction Using Acoustic Emission Signals

A Novel Computer Vision Based Machine Learning Approach For Online Tool Wear Monitoring In Machining

Online Tool Wear Classification during Dry Machining Using Real Time Cutting Force Measurements and a CNN Approach

Tool flank wear prediction using high-frequency machine data from industrial edge device

Online Surface Roughness Prediction for Assembly Interfaces of Vertical Tail Integrating Tool Wear under Variable Cutting Parameters

Data Mining-Based Flatness Pattern Prediction for Cold Rolling Process with Varying Operating Condition

Machine Learning Algorithms for Predicting Wear Rates on the Basis of Friction Noise

Tool wear prediction in edge trimming of carbon fiber reinforced polymer using machine learning with instantaneous parameters

Remaining useful lifetime prediction for milling blades using a fused data prediction model (FDPM)

The Prediction of Wear Depth Based on Machine Learning Algorithms

Machine Learning Approaches for Monitoring of Tool Wear during Grey Cast-Iron Turning

A hybrid deep learning model for robust prediction of the dimensional accuracy in precision milling of thin-walled structural components

Computer numerical control machine tool wear monitoring through a data-driven approach

Tool wear state recognition and prediction method based on laplacian eigenmap with ensemble learning model

Prediction of thin-walled workpiece machining error: a transfer learning approach