Abstract:A fundamental tent of life cycle analysis (LCA) is that every material product must become a waste. To choose the greener products, it is necessary to take into account their environmental impacts from cradle to grave. LCA is the tool used to measure environmental improvements. Aluminum (Al) is the third most common element found in the earth's crust, after oxygen and silicon. Al packaging foil was chosen as the material for the study with its life cycle perspective at Alexandria. The Al packaging produced from virgin and recycled Al was investigated through life cycle stages in these two production processes; primary and secondary. The aim of this study is to evaluate the environmental impact of aluminum packaging process by using life cycle analysis of its product from two different starting raw materials (virgin and recycled aluminum). The input and output materials, energy, water, natural gas consumptions, and solid waste uses in the foil industry had been analyzed in order to identify those with significant contribution to the total environmental impacts. From the survey done on the two life cycles, it was found that in environmental terms, the most important emissions from the primary process are the emission of CO(2) and perfluorocarbon (PFC) gases, which produce the greenhouse effect, and SO(2) as well as the emission of fluorides and polyaromatic hydrocarbons (PAH compounds), which are toxic to humans and the environment. On over all material balance, it was found that the ingot shares by 45% of the feed to the casthouse furnaces at Egyptian Copper Work (ECW), net production of the casthouse is 43.76% and the yield of rotary dross furnace (RDF) is 28.8%. The net production of the foil unit represents 35% of the total input to the unit. By comparing the two life cycles, it is obvious that, for water consumption, 93.5% is used in the primary cycle, while 6.5% is used in the secondary cycle. For electricity consumption, 99.3% is used in the primary cycle; while 0.63% is used in the secondary cycle. For the natural gas consumption, 46.66% is used in the primary cycle excluding Nag' Hammady as it uses fuel oil, while 53.34% is used in the secondary cycle. Using a matrix approach, the primary cycle scored 6 heavy loaded factors out of 9, while the secondary cycle scored 3 heavy loaded factors out of 9. It can be concluded that Al recycling (secondary cycle) in Al industry decreases the use of virgin material, energy use, and environmental loadings, while increasing the economic life of products, and reducing overall material demands. So, the secondary cycle is to be recommended and is the most favorable option in most of the factors influencing the two cycles. Monitoring of the furnaces, automatic control of the metal, proper dross cooling, better refining of molten Al, rate of solidification of molten Al, and proper annealing process will lead to reduction of the overall fuel, water, and electricity consumption and metal losses will be minimum.

Life Cycle Assessment on the Direct Recycling Aluminium Alloy AA6061 Chips and Metal Matrix Composite (MMC-AlR)

Life cycle assessment of direct recycling hot press forging of aluminium AA7075 metal matrix composite

Critical Life Cycle Inventory for Aluminum Die Casting: A Lightweight-Vehicle Manufacturing Enabling Technology

Response surface methodology and machine learning optimisations comparisons of recycled AA6061-B4C-ZrO2 hybrid metal matrix composites via hot forging forming process

Reprocessing of AW2007, AW6082 and AW7075 aluminium chips by using sintering and forging operations

Study on the Wear Influence for Recycled AA6061 Aluminum/Al2O3 Utilizing the Face Central-Full Factorial Technique (FCFFT)

A review on direct hot extrusion technique in recycling of aluminium chips

Comparative life cycle assessment of aluminium and CFRP composites: the case of aerospace manufacturing

Design of aluminum eco-composite for sustainable engineering application by the valorization of municipal wastes: Experimental and response surface analysis

Effect of Recycling on the Mechanical Properties of 6000 Series Aluminum-Alloy Sheet

A review on solid-state recycling of aluminum machining chips and their morphology effect on recycled part quality

A Review on Recycling Aluminum Chips by Hot Extrusion Process

Addressing sustainability in the aluminum industry: a critical review of life cycle assessments

Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach in sustainable hot forging

Life cycle assessment of the rolling process of thin aluminum sheets

Process of Aluminum Dross Recycling and Life Cycle Assessment for Al-Si Alloys and Brown Fused Alumina

Recycling of Aluminum Chips in Die Casting Foundry

Effect of Continuous Casting and Heat Treatment Parameters on the Microstructure and Mechanical Properties of Recycled EN AW-2007 Alloy

Reducing Environmental Impact on SME Metals Production Process Using Life Cycle Assessment and Analytical Hierarchy Process Method

Life cycle assessment of hydrometallurgical recycling for cathode active materials

Life cycle Analysis of Aluminum Foil Packaging Material