Abstract:Machining chips are a potentially versatile material feedstock to be used in a range of solid-state and melt based manufacturing processes. The poor current understanding of the behaviour of chips in such processes limits the likelihood of practical adoption of such materials on an industrial scale. The re-use (as opposed to recycling or landfilling) of machining waste offers both economic and environmental savings. Iron and steel production causes up to 9%, and aluminium up to 1.5% of global process and energy CO 2 emissions. It is proposed that between 0.24% and 0.5% (117 Mt CO 2 ) of global CO 2 emissions could be saved by reusing steel machining chips and between 0.13% and 0.22% (51 Mt CO 2 ) via re-use of aluminium chips, through mitigation of recycling associated emissions or emissions from generation of new steel. Re-use of large manufacturing scrap, i.e. the majority of such scrap, increases these values to savings of 1% and 0.86% of global CO 2 emissions for steel and aluminium respectively in the best scenario. This work gives a perspective on the potential for chips to retain value and be re-used in manufacturing process streams. The paper guides the reader from the generation and control of machining chips, to the principles of material consolidation. The principles of material densification by both solid state and laser deposition based methods are described, and current and potential manufacturing processes which can use chips as a feedstock are critically reviewed in terms of their practicalities and final properties. A perspective on potential CO 2 savings is described, providing the underpinning motivation behind this work. It is shown there is significant potential for versatile manufacturing using machining chips by both solid-state and laser-based processing of chips into finished products. An argument is also presented for a new approach to processing large-scrap, e.g. from the automotive manufacturing industry, as well as end-of-life automotive scrap, into smaller chips ready for re-use.

Recycling of Aluminum Chips in Die Casting Foundry

Reprocessing of AW2007, AW6082 and AW7075 aluminium chips by using sintering and forging operations

Vacuum-oxygen-low recycling process of aluminium composites manufactured from steel machining chips

Manufacturing of Aluminum Alloy Parts from Recycled Feedstock by PIG Die-Casting and Hot Stamping

Aluminum dross: aluminum metal recovery and emerging applications

A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications

A review on solid-state recycling of aluminum machining chips and their morphology effect on recycled part quality

Improved iron-tolerance in recycled aluminum alloys via direct strip casting process

Recovery of Aluminium 319.1 Alloy(S) From Metal Turning Scrap

A review on direct hot extrusion technique in recycling of aluminium chips

Critical Life Cycle Inventory for Aluminum Die Casting: A Lightweight-Vehicle Manufacturing Enabling Technology

Upgrading recycling of Al–7 wt%Si alloys using electromagnetic force in directional solidification

Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigm

Research on synergistic disposal and high-value utilization of secondary aluminum dross and spent carbon anode

Effect of Various Forms of Aluminum 6082 on the Mechanical Properties, Microstructure and Surface Modification of the Profile after Extrusion Process

"EFFECTIVE REDUCTION OF IRON IMPURITIES IN RECYCLED ALUMINIUM-SILICON ALLOY TYPE LM-6 THROUGH SEDIMENTATION AND FILTRATION WITH SYNTHESIZED Mn, Cr and Zr TRANSITION METAL POWDERS"

Ductile and Corrosion-Resistant Aluminum Alloy From Recycled Secondary Aluminum Scraps Containing Iron Impurities

Application of Refractory Metals to Facilitate Hot Chamber Aluminum Die Casting

Effect of Continuous Casting and Heat Treatment Parameters on the Microstructure and Mechanical Properties of Recycled EN AW-2007 Alloy

A review of principles and options for the re-use of machining chips by solid, semi-solid or melt-based processing