Abstract:Antimony (Sb), arsenic (As), and lead (Pb) are toxic metal(loid)s that can cause serious environmental pollution. The above emphasizes the need for a development of efficient technologies for metal(loid) removal, especially from low-pH environments due to the increased mobility of the contaminants under acidic conditions. Herein, for the first time, removal of Sb(V/III), As(V/III), and Pb(II) from acidic waters is described, using low-cost adsorbents synthesized from red mud (RM; a solid waste from the alumina industry) under the catalysis by acid mine drainage (AMD; acidic effluents from mines). The reactions between RM and AMD were studied to describe Fe/S/Ca/Al/Si speciation transformations during the adsorbent formation. In addition, Sb/As/Pb adsorption behavior and the relationship between adsorbent properties and Sb/As/Pb removal efficiencies were investigated. The maximum removal capacities for Sb(V), Sb(III), As(V), As(III), and Pb(II) reaching 1,637.8, 80.2, 109.2, 16.4, and 518.7 mg/g, respectively. The primarily Ca 2+ from the Ca-bearing compounds (determined in RA2, synthesized under S RM /L AMD 2:1) contributed to Sb(V) removal ( via precipitation of CaSb 2 O 5 (OH) 2 and formation of Sb-bearing precipitate, with silicate gel nanospheres securing high stability of the immobilized Sb). In the As immobilization process, Fe(III) (hydr)oxides (formed in RA4, synthesized under S RM /L AMD 4:1) such as goethite (α-FeOOH) and bernalite (Fe(OH) 3 ) played a dominant role. Convertible sulfates (e.g., CaSO 4 and Al 2 (SO 4 ) 3 ) in RA10 (synthesized under S RM /L AMD 10:1) ensured a high removal capacity for Pb(II) across a wide pH range (2 to 7) via PbSO 4 precipitation. In contrast, the formation of PbCO 3 and Pb 3 (CO 3 ) 2 (OH) 2 was the main mechanism for Pb(II) removal by unamended RM at pH 5.0, while no contaminant removal capacity was observed at pH 2.0.

Adsorption performance of MIL-121/CA on lead and cadmium in acid mine drainage

Adsorption Properties of Pb(II) and Cd(II) in Acid Mine Drainage by Oyster Shell Loaded Lignite Composite in Different Morphologies

Facile Preparation of Metal-Organic Framework (MIL-125)/Chitosan Beads for Adsorption of Pb(II) from Aqueous Solutions

Magnetic Mesoporous Calcium Carbonate-Based Nanocomposites for the Removal of Toxic Pb(II) and Cd(II) Ions from Water

Revealing the Role of Calcium Alginate-Biochar Composite for Simultaneous Removing SO42- and Fe3+ in AMD: Adsorption Mechanisms and Application Effects.

Competitive adsorption behavior and adsorption mechanism of limestone and activated carbon in polymetallic acid mine water treatment

Simultaneous Adsorption of Lead and Cadmium on MnO2-loaded Resin

Revealing the role of calcium alginate-biochar composite for simultaneous removing SO 4 2− and Fe 3+ in AMD: Adsorption mechanisms and application effects

Integration of thermoresponsive MIL-121 into alginate beads for efficient heavy metal ion removal

Removal of Pb(II) from Acid Mine Drainage with Bentonite-Steel Slag Composite Particles

Efficient Removal of Heavy Metals from Acid Mine Drainage by Ε-Mno2 Adsorption

Effective adsorption of Pb(ii) from wastewater using MnO2 loaded MgFe-LD(H)O composites: adsorption behavior and mechanism

Adsorption performance and mechanistic study of Pb, Cd and As by CaAl-LDH in wastewater

Novel adsorbent synthesized from red mud and acid mine drainage for enhanced contaminant removal: Industrial waste transformation, adsorbent performance and metal(loid) removal mechanisms

Layered Double Hydroxides Derived from MIL-88A(Fe) As an Efficient Adsorbent for Enhanced Removal of Lead (II) from Water

Engineering Anion Resin Based Amorphous Molybdenum Sulphide Composite for Treatment of Authentic Acid Mine Drainage

Separable calcium sulphate modified biochar gel beads for efficient cadmium removal from wastewater

Immobilization of Pb2+ and Cd2+ on the Novel Calcium/magnesium Silicate and Their Transformation in the Presence of Phosphate

Poly(methacrylic Acid)-Grafted Chitosan Microspheres Via Surface-Initiated ATRP for Enhanced Removal of Cd(II) Ions from Aqueous Solution.

Effective and simultaneous removal of heavy metals and neutralization of acid mine drainage using an attapulgite-soda residue based adsorbent

Surface-loaded magnesium and phosphorus-modified lignite adsorbents: Efficient adsorption and immobilization for remediation of Cd-contaminated water and soil