Abstract:This research focuses on 3D printable thermoplastic polyurethane filaments embedded with multi‐walled carbon nanotubes for enhanced strain sensing in large deformations. It explores the electromechanical properties of the filaments, identifying a conductive threshold in the composite material. The study also examines the application of these filaments in flexible structures, particularly for soft robotics and wearable electronics. This study investigates the development of thermoplastic polyurethane (TPU) filaments incorporating multi‐walled carbon nanotubes (MWCNT) to enhance strain‐sensing capabilities. Various MWCNT reinforcement ratios are used to produce customized feedstock for fused filament fabrication (FFF) 3D printing. Mechanical properties and the piezoresistive response of samples printed with these multifunctional filaments are concurrently evaluated. Surface morphology and microstructural observations reveal that higher MWCNT weight percentages increase filament surface roughness and rigidity. The microstructural modifications directly influence the tensile strength and strain energy of the printed samples. The study identifies an apparent percolation threshold within the 10–12 wt.% MWCNT range, indicating the formation of a conductive network. At this threshold, higher gauge factors are achieved at lower strains. A newly introduced Electro‐Mechanical Sensitivity Ratio (ESR) parameter enables the classification of composite behaviors into two distinct zones, offering the ability to tailor self‐sensing structures with on‐demand properties. Finally, flexible structures with proven application in soft robotics and shape morphing are fabricated and tested at different loading conditions to demonstrate the potential applicability of the custom filaments produced. The results highlight a pronounced piezoresistive response and superior load‐bearing performance in the examined structures.

Development of High-Sensitivity Thermoplastic Polyurethane/Single-Walled Carbon Nanotube Strain Sensors through Solution Electrospinning Process Technique

High sensitive electrospun thermoplastic polyurethane/carbon nanotubes strain sensor fitting by a novel optimization empirical model

Strain sensor based on polyurethane/carbon nanotube elastic conductive spiral yarn with high strain range and sensitivity

Additive Manufacturing of Stretchable Multi-Walled Carbon Nanotubes/Thermoplastic Polyurethanes Conducting Polymers for Strain Sensing

Highly flexible and multifunctional CNTs/TPU fiber strain sensor formed in one-step via wet spinning

Preparation of CNT/CNF/PDMS/TPU Nanofiber-Based Conductive Films Based on Centrifugal Spinning Method for Strain Sensors

Durable washable wearable antibacterial thermoplastic polyurethane/carbon nanotube@silver nanoparticles electrospun membrane strain sensors by multi-conductive network

Highly Sensitive Ultrathin Flexible Thermoplastic Polyurethane/Carbon Black Fibrous Film Strain Sensor with Adjustable Scaffold Networks

Flexible Strain Sensors with Enhanced Sensing Performance Prepared from Biaxially Stretched Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites

Fabrication and Characterization of Electrically Conductive 3D Printable TPU/MWCNT Filaments for Strain Sensing in Large Deformation Conditions

Strain Sensors for Human Movement Detection Based on Fibrous Membranes Comprising Thermoplastic Polyurethane, Ag Nanoparticles, and Carbon Nanotubes

Highly Sensitive Flexible Strain Sensor Based on a Double-percolation Structured Elastic Fiber of Carbon Nanotube (CNT)/Styrene Butadiene Styrene (SBS) @ Thermoplastic Polyurethane (TPU) for Human Motion and Tactile Recognition

Additive Manufacturing of Stretchable Polyurethane/Graphene/Multiwalled Carbon Nanotube-Based Conducting Polymers for Strain Sensing

Multi-Walled Carbon Nanotube-Enhanced Polyurethane Composite Materials and the Application in High-Performance 3D Printed Flexible Strain Sensors

Experimental study of the impact of electrospinning parameters on the electromechanical properties of strain sensitive electrospun multiwalled carbon nanotubes/ thermoplastic polyurethane nanofibers

Effect of Melt Mixing Conditions on the Mechanical, Electrical, and Strain Sensing Properties of Carbon Nanotube–Styrene Butadiene Styrene/Thermoplastic Polyurethane Nanocomposites with a Double-Percolation Structure

Fabrication of ultra-high working range strain sensor using carboxyl CNTs coated electrospun TPU assisted with dopamine

A Fabric-Based Strain Sensor with a Microbridge Structure and the Supercapacitor-Powered Integrated Sensing System

Flexible Strain Sensor Enabled by Carbon Nanotubes‐Decorated Electrospun TPU Membrane for Human Motion Monitoring

On the Effect of Fibre Orientation and MWCNTs on the Strain‐Sensing Performance of TPU/PANI Electrospun Nanofibres

Highly Sensitive and Color Adaptable Polyurethane‐Based Strain Sensors with Embedded Silver Nanowires