Abstract:The heavy metals found in contaminated waters are dangerous for the environment and human health, so it is necessary to seek and apply techniques to remove these pollutants, using adsorption techniques with natural biopolymers as cost effective biosorbent. Since large amounts of Jackfruit (Artocarpus heterophyllus fruit) waste part are abandoned after the pulp used around Tepi areas, the possibility of developing value-added products from them is interesting innovation. In this work, cellulose fiber was extracted from Artocarpus heterophyllus fruit waste part and modified with Isopropyl alcohol groups to produce which were then used as Lead metal ion adsorbents. The modified cellulose was characterized by several techniques including Fourier transform infrared spectra (FTIR), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). This modified cellulose was used as adsorbents for adsorption studies of heavy metal ions (Pb2+) within batch adsorption systems. A solution of lead ion (Pb2+) was used as artificial wastewater for the purpose of studying biosorption efficiencies. The biosorption efficiencies of modified cellulose were studied by using four adsorption parameters. The optimum biosorption of modified cellulose at 25 °C, were found to be 94.2%, 76.12%, 82.54%, and 90.13%, of Pb2+ for the adsorption parameter; biosorbent dosage, contact time, Pb (II) concentration, and pH respectively. The biosorption kinetics behaviour of modified cellulose for Pb2+ fitted well with a pseudo-second-order model with correlation coefficient of 0.9975. The biosorption isotherm behaviour was well described using the Langmuir biosorption isotherm model with higher correlation coefficient of 0.9935. The reusability and desorption study of modified cellulose shows that it can be reused 2 to 4 times and after 5th cycles the desorption was significantly decreased. This study showed that the modified cellulosic adsorbents made from (Artocarpus heterophyllus fruit) were able to efficiently adsorb metal ions from aqueous solution.

Synthesis and Characterization of a New Ion Exchange Cellulose -1- Butane Sulphonic Acid (CBSA) Resin and its Application for Removal of Hazardous Metal Ion (Pb2+) from Industrial Waste Water by Batch Method

Ni(II) and Pb(II) Removal Using Bacterial Cellulose Membranes

Cellulose modification using sulfamic acid for adsorption of methylene blue and lead ions

Synthesis of Cellulose–Poly(Acrylic Acid) Using Sugarcane Bagasse Extracted Cellulose Fibres for the Removal of Heavy Metal Ions

Extraction and modification of cellulose from Artocarpus heterophyllus for biosorption of lead ion from aqueous solution as cost effective biosorbent

Designing of a cellulose-based ion-imprinted biosorbent for selective removal of lead (II) from aqueous solutions

Banana fiber Cellulose Nano Crystals grafted with butyl acrylate for heavy metal lead (II) removal

Environmental application of dicarboxylated hairy cellulose crosslinked with calcium for removal and confining of Pb(II)

Sodium itaconate grafted nanocellulose for facile elimination of lead ion from water

Cellulose Schiff Base as a Bio-based Polymer Ligand: Extraction, Modification and Metal Adsorption Study

Bacterial Cellulose-Derived Sorbents for Cr (VI) Remediation: Adsorption, Elution, and Reuse

Low-Cost Biosorbents Derived from Corn Husks for the Exclusion of Fe(II) and Cr(VI) Ions Undertaken Aqueous Media: Application for Wastewater Treatment

A new polysaccharide-based ion-exchange resin for industrial wastewater treatment

Synthesis, characterization and application of novel green chelating PE-TH resin in the removal of toxic metals from industrial effluents

The Development and Characterization of a Cotton–Chitosan Composite for Lead Removal from Water

Synthesis and Application of Sludge-Based Activated Carbon in the Efficient Removal of Cadmium (II) and Lead (II) from Wastewater

Removal of Heavy Metal Ions Using Modified Celluloses Prepared from Pineapple Leaf Fiber

Sorptive Removal of 133Ba from Aqueous Solution Using a Novel Cellulose Hydroxyapatite Composite Derived from Cigarette Waste

Effective and sustainable removal of Pb2+ ions from wastewater by a new synthetic bis-thiosemicarbazone derivative immobilized in amberlite XAD-2: Kinetic, isotherm and thermodynamic aspects

Electrospun amine-functionalized silica nanoparticles - cellulose acetate nanofiber membranes for effective removal of hardness and heavy metals (As(V), Cd(II),Pb(II)) in drinking water sources

Facile in situ synthesis of cellulose microcrystalline-manganese dioxide nanocomposite for effective removal of Pb(II) and Cd(II) from water