Abstract:In this research, we reported the synthesis of effective sulphonated sugarcane bagasse (SCB@SA) biosorbent based on agriculture waste materials via a simple diazotization strategy for the removal of methylene blue (MB) and Bismarck Brown R(BB) dyes from waste water samples. First, the sugarcane bagasse (SCB) waste was collected, grinded, and sieved to obtain the desired size. Secondly, the SCB powder is modified with sulfanilinic acid (SA) via the formation of its diazonium salt to introduce sulfonic groups on the SCB surface. Different advanced techniques were applied to characterize the prepared materials before and after the adsorption process viz. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS) and Thermogravimetric analysis (TGA). Different parameters affecting the adsorption process of both MB and BB were studied. Because of the higher correlation coefficient (R 2 ≥ 0.999) and lower error functions, the equilibrium MB and BB adsorption isotherms for a single-dye system fit Langmuir with maximum adsorption capacity reaching to 127.48 and 166.75 mg/g for MB and BB, respectively. Moreover, the R L values obtained for both dyes lie between 0 and 1, indicating that MB and BB adsorption by SCB@SA is a favorable process. Besides, the error functions' values of the pseudo-2nd-order are significantly lower than those of the pseudo-1st-order, implying that the adsorption MB and BB onto SCB@SA biosorbent fitted the pseudo-2nd-order kinetic model in a chemosorption manner. In the thermodynamic studies, the adsorption process is spontaneous, exothermic, and has less randomness. In addition, the SCB@SA biosorbent could be reused in five cycles maintaining on suitable adsorption efficiency. Finally, the MB and BB dyes could be adsorbed on the SCB@SA biosorbent via three mechanisms including π-π stacking, columbic attraction, and hydrogen bonding.

Cellulose modification using sulfamic acid for adsorption of methylene blue and lead ions

Modified Native Cellulose Fibers-A Novel Efficient Adsorbent For Both Fluoride And Arsenic

Ionic liquid groups modified 3D porous cellulose microspheres for selective adsorption of AO7 dye

Facile in situ synthesis of cellulose microcrystalline-manganese dioxide nanocomposite for effective removal of Pb(II) and Cd(II) from water

Simultaneous removal of Methylene blue and Cadmium from aqueous solution by a novel sulfonated material: Characterization, mechanism and application

A Novel Cellulose-Based Composite Hydrogel Microsphere Material: for Efficient Adsorption of Co(II) and Ni(II) Ions in Water

Selective biosorption mechanism of methylene blue by a novel and reusable sugar beet pulp cellulose/sodium alginate/iron hydroxide composite hydrogel

Amino-Functionalized Cellulose Nanofiber/Lignosulfonate New Aerogel Adsorbent for the Removal of Dyes and Heavy Metals from Wastewater

Click chemistry-induced modification of covalent organic framework/cellulose aerogels for removal of dye and heavy metal ions

Click chemistry-induced selective adsorption of cationic and anionic dyes using functionalized cellulose methacrylate hydrogels

Design of amphoteric MOFs-cellulose based composite for wastewater remediation: Adsorption and catalysis

Cellulase modified waste biomass to remove sulfamethazine from aqueous solutions

Smart guanyl thiosemicarbazide functionalized dialdehyde cellulose for removal of heavy metal ions from aquatic solutions: adsorption characteristics and mechanism study

Novel sulfonic groups grafted sugarcane bagasse biosorbent for efficient removal of cationic dyes from wastewater

Research progress on chemical modification of waste biomass cellulose to prepare heavy metal adsorbents

Synthesis of bagasse-derived carboxymethyl cellulose aerogels for efficient removal of cationic dyes and heavy metal ions

Cellulose-citric acid-chitosan@metal sulfide nanocomposites: Methyl orange dye removal and antibacterial activity

Synthesis of Cellulose–Poly(Acrylic Acid) Using Sugarcane Bagasse Extracted Cellulose Fibres for the Removal of Heavy Metal Ions

Synthesis of Sodium Carboxymethyl Cellulose/Poly(acrylic acid) Microgels via Visible-Light-Triggered Polymerization as a Self-Sedimentary Cationic Basic Dye Adsorbent

Silk Sericin Enrichment through Electrodeposition and Carbonous Materials for the Removal of Methylene Blue from Aqueous Solution

Bamboo Nanocellulose/Montmorillonite Nanosheets/Polyethyleneimine Gel Adsorbent for Methylene Blue and Cu(II) Removal from Aqueous Solutions