Abstract:The present study presents an attempt to modify the surface properties of macroporous resins (MRs) in order to improve anthocyanin adsorption and desorption from Pyrus communis var Starkrimson fruit peel extract. A number of MRs were tested to optimise the ultrasonic-assisted adsorption (UAA) conditions; including ultrasonic power (100-400 W), resin-to-extract ratio (1-3 g/50 mL) and temperature (20-40 degrees C). Similarly, varying ultrasonic-assisted desorption (UAD) conditions were optimised; including ultrasonic power (200-600 W), resin-to-solvent ratio (1-4 g/50 mL), ethanol concentration (60-90% v/v) and temperature (20-40 degrees C). The Amberlyst 15 (H) cationic resin was found to be superior to the other tested resins. The maximum adsorption capacity (659 mu g/g) of cyanidin 3-galactoside (Cy 3-gal) was achieved under the optimised UAA conditions (400 W, 20 degrees C and 1 g/50 mL), while 616 mu g/g of Cy 3-gal was recovered under the optimised UAD conditions (582 W, 1 g/50 mL, 60% and 20 degrees C). Moreover, titratable-acid and total-sugar contents were found to be significantly lower under UAA than under conventional-assisted adsorption (CAA). ANOVA revealed that process factors had significant effects on the Cy 3-gal purification, as depicted by their linear, quadratic and interactive effects. While anthocyanin adsorption was found to be significantly improved at lower ultrasonic power, higher power promoted the desorption process. Adsorption under optimized UAA conditions followed pseudo second-order kinetics and multilayer adsorption (Freundlich isotherm) onto the Amberlyst 15 (H) resin surface was observed. The particle-size distribution curve and scanning electron microscopic images also revealed higher resin-surface roughness, peeling and the appearance of pores on the surface under ultrasonication. This is the first study to use ultrasonication to modify a cationic exchange resin for the improvement of Cy 3-gal purification from a fruit extract. This study can recommend the use of ultrasonication as a low-cost green technique that can improve macroporous resin characteristics for better purification of compounds from an extract

Study on the adsorption kinetics of L-citrulline from the pseudo aqueous solution of watermelon rind on ion exchange resin

Adsorption behavior of L-tryptophan on ion exchange resin

Ultrasonic-assisted Modifications of Macroporous Resin to Improve Anthocyanin Purification from a Pyrus Communis Var. Starkrimson Extract

Kinetics and Optimization of L-Tryptophan Separation with Ion-Exchange Chromatography

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

Ionic Liquid-Based Ultrasonic-Assisted Extraction of L-Citrulline from Watermelon Rind

Synthesis, adsorption and molecular simulation study of methylamine-modified hyper-cross-linked resins for efficient removal of citric acid from aqueous solution

Rapid HPLC-UV method for quantification of l-citrulline in watermelon and its potential role on smooth muscle relaxation markers

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Adsorption efficiency of a continuous trapping system and its use for the collection of root exudates from cucumber

Effect of Dissolved Organic Matter on Nitrate-Nitrogen Removal by Anion Exchange Resin and Kinetics Studies.

Accelerated removal of nitrate from aqueous solution by utilizing polyacrylic anion exchange resin with magnetic separation performance

Ph Neutralization While Succinic Acid Adsorption Onto Anion-Exchange Resins

Mixed-Mode Adsorption of l-Tryptophan on D301 Resin through Hydrophobic Interaction/Ion Exchange/Ion Exclusion: Equilibrium and Kinetics Study

Selective Adsorption of Nitrate by a Macroporous Acrylic Anion Exchange Resin: Effect of the Competing Anions

SELECTION OF ION EXCHANGE RESINS AND RECYCLE OF CITRIC SOLUTION

Carmine Adsorption from Aqueous Solution by Crosslinked Peanut Husk

Adsorption of uranium on amino functionalized acrylonitrile anion exchange resin

Preparation of a Novel Anion Exchange Group Modified Hyper-Crosslinked Resin for the Effective Adsorption of Both Tetracycline and Humic Acid

Adsorbing Properties of Betaine by Cation Exchange Resin

Rapid removal of copper with magnetic poly-acrylic weak acid resin: Quantitative role of bead radius on ion exchange