Abstract:China produces and consumes most of coal in the world. This situation is expected to continue within a certain period in the future. Currently, Chinese coal industry is confronted with several serious problems relating to land resource, water resource, environmental, and ecological sustainability. Coal resource exploitation causes the permanent fracture and movement of strata structure, which have caused the fracture and collapse of overlying strata and further led to the subsidence of ground surface as well as the seepage of water in aquifers around the coal seam, which has resulted not only in the loss of land and water resources, but also in serious threats and accidents to underground mining. On the other hand, mining and mineral-processing wastes are one of the world’s long plagued concerns among solid wastes. Coal gangue, as the major waste with a huge amount of discharge, has not only occupied the land, but has also contaminated the ambient land resources and hydrological environment, and further led to ecological system destruction and degradation. What is more, in China there are large amounts of coal—located under railways, buildings, and water bodies—which are unavailable with traditional mining methods. These problems are obviously threaten the concept of green sustainable development. This paper introduces a novel developed solid dense stowing mining method, which is able to significantly reduce or event eliminate the corresponding damages caused by underground mining behavior and realize green and sustainable development. The novelty of this research work is realizing the automation and synchronization of mining and material stowing with an appropriate compaction ratio for adequate support of goaf roof. It can improve the stability of rock strata and the safety and efficiency of underground mining. We also studied and designed a perfect stowing material by using coal gangue and fly ash with appropriate proportions under different particle size gradations. By implementation of the above-mentioned methods in China, the solid dense stowing rate of mined seam areas have reached more than 95% and the overburden strata movements have been reduced to extremely low level which had nearly no damages to above buildings. The solid dense stowing mining method has also realized the reuse and recycling of coal mine solid wastes. Meanwhile, considerable previously unavailable coal resources under buildings, railways, and water bodies have been made available for exploration, which could extend the life of coal mines and increase the sustainability for coal industry and the environment. Ultimately, this method is a reliable way to realize green and sustainable mining. The strata structure protection, the surface subsidence prevention, and coal mine solid waste disposal have been realized at the same time.

Current Status of Research on Fill Mining Systems

Current Situation and Prospect of Coal Backfill Mining Technology

Coal Mine Solid Waste Backfill Process in China: Current Status and Challenges

Properties and Application of Backfill Materials in Coal Mines in China

Development overview of paste backfill technology in China’s coal mines: a review

Classification and Design of Backfill Coal Mining Systems Based on Typical Engineering Cases

Introduction to Concurrent Mining and Reclamation for Coal Mines in China

Progress and prospects of mining with backfill in metal mines in China

Dynamic Subsidence Simulation And Topsoil Removal Strategy In High Groundwater Table And Underground Coal Mining Area: A Case Study In Shandong Province

Research status of comprehensive utilization of coal-based solid waste (CSW) and key technologies of filling mining in China: A review

Paste Backfilling Longwall Mining Technology for Thick Coal Seam Extraction under Buildings and above Confined Aquifers: A Case Study

Study on the Partial Paste Backfill Mining Method in a Fully Mechanized Top-Coal Caving Face: Case Study from a Coal Mine, China

Sustainable high-intensity backfill coal mining method: feasibility assessment for ecologically fragile areas of Western China

Study on the Mining Effect and Optimal Design of Longwall Full Mining with Paste Partial Filling

The Recent Progress China Has Made in High-Concentration Backfill

Preliminary Exploration of the Technology of Coal Reshaping and Replacement Mining of Abandoned Coal in Goafs

Research on the Belt Loader Waste Rock Gravity Backfill Mining Technology

A Systematic Review of Paste Technology in Metal Mines for Cleaner Production in China

Subsidence Control Design Method and Application to Backfill-Strip Mining Technology

Gangue grouting filling in subsequent space of coal green mining: methodology and case study

Green and Sustainable Mining: Underground Coal Mine Fully Mechanized Solid Dense Stowing-Mining Method