Study on self‐healing gel plugging agent based on non‐covalent bonding interaction for drilling fluid
Yuanzhi Qu,Xinyu Zhou,Han Ren,YueHui Yuan,Wenchao Zhang,Gang Yang,Xianfa Zhang
DOI: https://doi.org/10.1002/app.53874
IF: 3
2023-03-13
Journal of Applied Polymer Science
Abstract:It is well known that drilling fluid leakage is a serious problem in deep well drilling and relies heavily on plugging to prevent or slow its intrusion into the formation. In order to simultaneously solve the problems of insufficient resistance to high temperatures and weak inter‐action of existing blocking agents, a gel blocking agent PCAA with rapid self‐healing ability was invented. PCAA uses acrylamide and acrylic acid as the main monomers and introduces chitosan monomers with a large number of amine and hydroxyl groups in order to achieve rapid self‐healing of the gel through intermolecular electrostatic and hydrogen bonding interactions. The preparation of PCAA has been optimized by orthogonal experiments in which all three constituent monomers are essential, and the major roles of the three monomers in the gel composition have been revealed by rheological and morphological analysis. After 16 h self‐healing the gel can recover 78.5% (13.5 kPa) of its tensile strength and deformation up to approximately 8 times. PCAA is capable of self‐healing in drilling fluids at 180°C and 8% NaCl, effectively plugging pores and cementing formations to prevent intrusion of drilling fluid (from total loss to 6.7 cm intrusion). In addition, PCAA enhances drilling fluid rheology and filtration reduction. PCAA mainly relies on its own blocking and intermolecular interaction to prevent drilling fluid intrusion into the formation. Second, it can interact with clay to assist in reducing fluid loss. Furthermore, the increased molecular movement caused by high temperatures makes it easier for PCAA to flow and enter the formation pore space and to interact with the clay to plug the pore space, thus better improving the drilling fluid performance. The self‐healing gel plugging agent proposed in this study provides a new idea for the development of temperature and salt resistant plugging agents for water‐based drilling fluids. During drilling in deep formations, it is challenging to form an effective plug to avoid borehole collapse under high temperatures and pressures. In order to simultaneously improve the high‐temperature resistance and interparticle interaction capability of traditional plugging agents, a new gel plugging agent (PCAA) with self‐healing capability was developed using chitosan, acrylamide, and acrylic acid. The rheological properties of the PCAA indicate that all monomers of PCAA are essential components to improve the performance of the plugging agent. Each monomer has a unique capability, such as acrylamide playing a dominant role in the construction of the gel network, acrylic acid enhancing the gel structure, and chitosan improving the gel adhesion. PCAA can be stretched to 8.8 times prolonged, and its tensile stresses and self‐healing rate in 16 h are 17.2 kPa and 78.5%, respectively. Under the extreme conditions of 180°C and 8% NaCl, PCAA still performs well in preventing drilling fluid from invading the sand layer due to its self‐healing and plugging effects. In addition, the interaction of PCAA and clay improves the stability, rheological properties, and filtration reduction of drilling fluids at high temperatures. The developed PCAA has been successfully applied to the field with extreme conditions, providing insights into plugging agent design.
polymer science