Abstract:In the present work, the dynamic behavior of inertial fibers suspended in a turbulent vertical channel flow has been investigated. The three-dimensional turbulent flow field was obtained from the Navier-Stokes equations by means of direct numerical simulation in an Eulerian reference frame. The fibers were modeled as prolate spheroidal particles in a Lagrangian frame and characterized by their inertia and shape. The translation and rotation of the individual fibers were governed by viscous forces and torques as well as by gravity and buoyancy according to Newton's laws of motion. The test matrix comprised four different Stokes numbers (inertia) and three different aspect ratios (shape). The twelve different fiber types were suspended both in a downward and in an upward channel flow. Fiber orientation and velocity statistics were compared with channel flow results in absence of gravity.The results showed that gravity has a negligible effect for fibers with modest inertia, i.e. low Stokes numbers, whereas gravity turned out to have a major impact on the dynamics of highly inertial fibers. Irrespective of the bulk flow direction, a preferential alignment of the inertial fibers with the gravity force was found in the channel center where fibers have been known to orient randomly in absence of gravity. In the downward channel flow, the drift velocity of the fibers towards the walls was substantially higher for fibers than for spheres and also higher than when gravity was neglected. In the upward flow configuration, the modest drift velocity of inertial spheres was totally quenched for all fibers irrespective of shape. The suppressed drift velocity resulted in a more uniform fiber distribution throughout the channel as compared to the distinct near-wall accumulation in downward flow and in absence of gravity. This suggests that an upward flow configuration should be the preferred choice if a uniform fiber distribution is desired, as in a biomass combustion reactor. (C) 2016 Elsevier Ltd. All rights reserved.

Shapes and terminal velocities of single bubbles rising through fiber bundle in stagnant water

CFD simulations of fiber-fiber interaction in a hollow fiber membrane bundle: Fiber distance and position matters

Characteristics of Fiber Suspension Flow in a Turbulent Boundary Layer

GENERAL DISCUSSION ON TERMINAL VELOCITY FOR RISING SINGLE BUBBLE

Experimental Research on the Hydrodynamic Instability of Fiber Suspensions in Channel Flow

On Fiber Behavior in Turbulent Vertical Channel Flow

Effect of Fibers on the Flow Property of Turbulent Fiber Suspensions in a Contraction

Discrete element simulation studies of angles of repose and shear flow of wet, flexible fibers.

Fiber Orientation Distribution and Rheological Properties of Fiber Suspension in a Turbulent Jet

A New Expression for the Velocity Profile in the Turbulent Pipe Flows of Fiber Suspension

Numerical Prediction of the Flow Property in Round Turbulent Jet of Fiber Suspension

Flowrate Effects on the Lateral Coalescence of Two Growing Bubbles

Non-spherical Collapse of a Cavitation Bubble Induced by a Rigid Filament

Bubble Statistics in Shallow Angle Plunging Liquid Jets

Long-distance Liquid Transport Along Fibers Arising From Plateau-Rayleigh Instability

Direct numerical simulation of deformable rising bubbles at low Reynolds numbers

Numerical Simulation and Visualization of Fiber Suspension in a Turbulent Round Jet

Numerical simulation of fiber orientation distribution in round turbulent jet of fiber suspension

Non-Uniform Capillary Model for Unidirectional Fiber Bundles Considering Pore Size Distribution

Dynamics of Sedimentation of Flexible Fibers in Moderate Reynolds Number Flows

The dynamics of fibers dispersed in viscoelastic turbulent flows