Design of Novel BELBIC Controlled Semi-Active Suspension and Comparative Analysis with Passive and PID Controlled Suspension
Pankaj SHARMA,Vinod KUMAR
DOI: https://doi.org/10.48048/wjst.2021.8989
2021-03-01
Walailak Journal of Science and Technology (WJST)
Abstract:Passenger comfort, quality of ride, and handling have broughta lot of attention and concern toautomotive design engineers. These 2 parameters must have optimum balance as they have an inverse effect on each other. Researchers have proposed several approaches and techniques like PID control, fuzzy approach, GA, techniques with inspiration from nature and hybrid techniques to attain the same. A new controller based on the learning behavior of the human brain has been used for the control of semi-active suspension in this study. The controller is known as the Brain Emotional Learning-Based Intelligent Controller (BELBIC). A one-fourth model of car along with the driver model having 6 degrees of freedom (DOF) wasmodeled and simulated. The objective of the studywasto analyze the performance of the proposed controller for improving the dynamic response of the vehicle model coupled with complex biodynamic models of the human body as a passenger, making the whole dynamic system very complex to control. The performance wasanalyzed based on percentage reduction in the overshoot of the vehicle’s sprung mass as well as different human body parts when subjected to road disturbances. The proposed controller performance wascompared with the PID controller, widely used in semi-active suspension. The simulation results obtained for BELBIC controlled system for circular road bump showed that the overshoot of passenger head and body wasreduced by 18.84 and 18.82 %, respectively and reduction for buttock and leg displacement was18.87 %. The vehicle’s seat and sprung mass displacement displayedan improvement of 18.90 and 18.51 %. The overshoot of passenger's head and body displacement wasimproved by 19.79and 19.62 %,respectively, whereas improvement for buttock & leg, vehicle’s seat, and sprung mass displacement were19.81, 20.00, and 20.49 % against trapezoidal speed bump. The PID controlled suspension disclosed an improvement of 8.74, 8.53, 8.75, 11.11, 14.75 % against circular bump and 10.72, 10.33, 10.73, 11.11 and 11.75 % against trapezoidal bump for overshoot reduction of passenger head, body, buttock & leg, vehicle’s seat and sprung mass displacement, respectively. The proposed BELBIC controlled semi-active suspension outperformed the widely used PID controlled semi-active suspension and indicated asignificant improvement in the ride quality of the vehicle.
English Else