Abstract:Phase change materials (PCMs) are widely employed in electronic thermal control systems for spacecraft because of their substantial energy storage competencies. Hence, the impact of gravitational acceleration (GA) on PCM thermal performance holds particular significance. Moreover, given considerations for spacecraft center of gravity, attitude control, and structural design, choosing an optimal battery placement orientation becomes pivotal for maximizing available space utilization. This study employs the enthalpy-porosity method to simulate and assess the heat transfer efficiency of PCM and the thermal behavior of cooling battery thermal management system (BTMS) under different gravity environments (0.05 g, 0.1 g, 1 g, 10 g, and 20 g) and different inclination angles ( θ = 90°, 45°, 0°). The research findings indicate that when θ = 90°, as gravity increases from 0.05g to 20g, the complete melting time of PCM at GA = 20g is shortened by 95.05 s (15.00 %) compared to GA = 0.05g. Particularly, when GA = 10 g, increasing θ from 45° to 90° reduces PCM melting time by 59.05 s (9.66 % reduction) compared to θ = 45°, while at θ = 0°, it decreases by 65.75 s (10.75 % reduction). Notably, at θ = 45°, some unmelted solid PCM accumulates in the lower right corner of the enclosure hindering the BTMS heat transfer. Based on PCM melting characteristics, three optimization structures for different θ are proposed. At t = 240 s, PCM melting significantly improves with fins. Comparing Convective Heat Transfer Coefficients (CHTC) curves before and after optimization reveals reduced accumulated effects. However, more fins aren't always better due to BTMS weight considerations. Investigating enhanced CHTC, fin mass, and volume ratio( γ ), the optimized model impacts BTMS weight differently for θ values. θ = 45°, a combination of annular and straight fins, is determined optimal using entropy-weighted TOPSIS. This paper innovatively studies PCM melting in BTMS under varied gravitational environments and θ , proposing an enhanced heat transfer scheme for aerospace BTMS design.

Numerical study on electrohydrodynamic enhancement of PCM melting in cylindrical annulus under microgravity

Parametric Study on Melting Process of a Shell-and-tube Latent Thermal Energy Storage under Fluctuating Thermal Conditions

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Melting behavior and heat transfer performance in a modified PCM-filled enclosure with fins under hypergravity conditions

Experimental Investigation of Heat Storage and Heat Transfer Rates During Melting of Nano-Enhanced Phase Change Materials (nepcm) in a Differentially-Heated Rectangular Cavity

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

A Eulerian Numerical Model to Predict the Enhancement Effect of the Gravity-Driven Motion Melting Process for Latent Thermal Energy Storage

Numerical investigation on melting behaviour of phase change materials/metal foam composites under hypergravity conditions

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Thermoelectrohydrodynamic convection in a finite cylindrical annulus under microgravity

Numerical study and optimization of battery thermal management systems (BTMS) Based on Fin-Phase change material (PCM) in variable gravity environments

Natural convection in the melting of PCM in a cylindrical thermal energy storage system: effects of flow arrangements of heat transfer fluid and associated thermal boundary conditions

Performance enhancement of a horizontal latent thermal energy storage unit with elliptical fins

Analysis of heat transfer and fluid flow during the melting process of PCM within tubular thermal energy storage unit

Electrohydrodynamic acceleration of charging process in a latent heat thermal energy storage module

Comprehensive performance analysis and structural improvement of latent heat thermal energy storage (LHTES) unit using a novel parallel enthalpy-based lattice Boltzmann model

An Experimental and Numerical Investigation of Constrained Melting Heat Transfer of a Phase Change Material in a Circumferentially Finned Spherical Capsule for Thermal Energy Storage

Optimal eccentricity and exergy analyses of a horizontal double-tube latent heat storage unit for melting processes

Numerical validation and assessment of vertical and horizontal latent heat energy storage system during a melting process

Enhancing heat transfer and melting rates in Large-scale gallium cavities: The impact of buoyancy forces and magnetohydrodynamics