Abstract:Offshore wind is a safe,clean,and stable source of renewable energy,which is a strategic option for overcoming the problems of energy shortage and environment contamination.Because of their high,slender,and flexible nature,accompanied with mass and stiffness distribution,offshore wind turbines are dynamically sensitive structures in which their dynamic behavior is strongly affected by environmental loading and the stiffness of their foundations.The first natural frequencies of these structures are very close to the forcing frequencies imposed by the environment and the onboard machinery.Changes in the foundation stiffness under cyclic loading will ultimately result in changes to the natural frequency of the structure.However,little is known about the long-term dynamic behavior of the entire offshore wind turbine structure.Therefore,the design of foundations and prediction of long term performance remain challenging.In the design work of offshore wind turbines,the soft-stiff type is usually chosen under general circumstances in which the natural frequency is between 1Pand 3Pbands.This study establishes a simplified wind turbine model based on the dynamic model test platform at the University of Surrey.The model system includes a foundation,tower,and top mass.On the basis of the novel cyclic loading provide system,four groups of tests were conducted to study the long-term dynamic behavior of a wind turbine model supported on a pile foundation.This investigation focused on changes of the model turbine’s first natural frequency and studied the influence from the amplitude of cyclic loading.For the observed tests results,detailed analysis was performed on the basis of soil behavior and its migration pattern.The test results and a series of similitude relationships reveal the dynamic behavior of an wind turbine structure.Moreover,suggestions for foundation and structure selection for a prototype wind turbine are given.

Finite element modeling and modal testing of a wind turbine lattice tower component with interference pin connections

FE-assisted investigation for mechanical behaviour of connections in offshore wind turbine towers

Scaled Model Test Study of the Dynamic Behavior of an Offshore Wind Turbine Support Structure

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Probabilistic fatigue analysis on a central holed thick steel plate of C1 Wedge Connection for wind turbine tower assembling

Wind-induced vibration and fatigue analysis of long span lattice structures considering distribution of wind speed and direction

Flexural Tests and Associated Study of a Full-Scale 65-kW Wind Turbine Tower

Updating Finite Element Model of a Wind Turbine Blade Section Using Experimental Modal Analysis Results

Analysis of Static Strength and Fatigue Reliability of the Supporting Structure of Wind Turbine

Modal Analysis of Wind Turbine Tower

The C1 wedge connection in towers for wind turbine structures, tensile behaviour of a segment test

Inverse modeling of damping and soil–structure interface for monopiled offshore wind turbines

A novel virtual material layer model for predicting natural frequencies of composite bolted joints

Wind-Induced Response Analysis and Fatigue Life Prediction of a Hybrid Wind Turbine Tower Combining an Upper Steel Tube with a Lower Steel Truss

Dynamic Analysis of Wind Turbines Including Nacelle–tower–foundation Interaction for Condition of Incomplete Structural Parameters

The Modeling Method for Vibration Characteristics Analysis of Composite-Laminated Rotationally Stiffened Plate

Wind Tunnel Tests of an Aeroelastic Model of a Long-Span Transmission Tower

3-D Finite Element Analysis of Large Wind Tubine Tower

Optimal design of a hinge-spring-friction device for enhancing wind induced structural response of onshore wind turbines

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading