Abstract:Quasi-two-dimensional(quasi-2D)perovskites are one of the most promising luminescent layer candidates for light-emitting diodes(LEDs)because of their excellent optoelectronic properties such as large exciton binding energy,efficient energy transfer,high photoluminescence quantum yield,and adjustable band gap.However,the formation of a large number of low-dimensional phases and surface/interface defects during solution processing of quasi-two-dimensional perovskite films gives rise to an increase in non-radiative recombination,resulting in deteriorated light-emitting diode performance.It is highly desirable to simultaneously realize low-dimensional phase formation inhibition and surface/interface defect passivation during quasi-two-dimensional perovskite film formation.Herein,we report a multifunctional additive,1,6-bis(acryloyloxy)-2,2,3,3,4,4,5,5-octafluorohexane(OFHDODA),which has strong physical and chemical interactions with the PEA2Cs2Pb3Br10 precursor that can effectively suppress non-radiative recombination in the perovskite films.The distinct C=C peak in the Fourier transform infrared spectroscopy(FTIR)spectra and the F 1s peak in the X-ray photoelectron spectroscopy(XPS)spectra showed that OFHDODA molecules were successfully incorporated into the perovskite films,and most OFHDODA molecules existed as monomers.With the addition of OFHDODA,the photoluminescence quantum yield(PLQY)of the perovskite film increased from 19.7％to 49.0％,and the PL emission wavelength red-shifted from 508 to 511 nm.It was demonstrated that hydrogen bond interactions between the polyfluorine structure and PEA+can tune perovskite crystallization dynamics,which inhibit the formation of low-dimensional phases,as shown by the reduced peak intensities at 403 nm(n=1),434 nm(n=2),and 465 nm(n=3)in the absorption spectra.The strong Lewis base moiety of the ester groups passivates the unsaturated Pb2+defects at the surface and grain boundaries of the perovskite films,as evidenced by the Pb 4f peak shift in the XPS spectra and the C=O shift in the FTIR spectra.The trap-filled limiting voltage(VTFL)decreased in both hole-only and electron-only devices,which also proves the reduction of Pb2+defects.At the optimized OFHDODA concentration,the scanning electron microscopy(SEM)and atomic force microscopy(AFM)results from the perovskite films show lower roughness and smoother surface potential,which promotes superior interfacial contact.As a result,perovskite LEDs with a device structure of indium tin oxide glass/poly(9-vinylcarbazole)/perovskite/1,3,5-tris(1-phenyl-1H-benzimidazol-2-yl)benzene/8-hydroxyquinolinolato-lithium/Al exhibited an improved maximum external quantum efficiency(EQE)from 8.55％to 13.76％,improved maximum brightness from 16400 to 17620 cd·m-2,and increased lifetime from 8 min to 12 min.This process provides an effective way to suppress non-radiative recombination in quasi-2D perovskites via additive molecular structure design,leading to superior electroluminescence performance.

Organic ammonium salt assisting crystallization and defect passivation of quasi-two-dimensional pure blue perovskite at the buried interface

Regulating Perovskite Crystallization through Interfacial Engineering Using a Zwitterionic Additive Potassium Sulfamate for Efficient Pure‐Blue Light‐Emitting Diodes

Defect Passivation Efficacy of 2D Perovskite Interlayer for Perovskite Sky-Blue Emission Toward High Device Efficiency

A Spacer Cation Assisted Nucleation and Growth Strategy Enables Efficient and High‐Luminance Quasi‐2D Perovskite LEDs

Transformation of Quasi‐2D Perovskite into 3D Perovskite Using Formamidine Acetate Additive for Efficient Blue Light‐Emitting Diodes

Strategic Buried Defect Passivation of Perovskite Emitting Layers by Guanidinium Chloride for High‐Performance Pure Blue Perovskite Light Emitting Diodes

A multifunctional interface optimization strategy for efficient Quasi-2D blue perovskite Light-Emitting diodes

Ionic Liquid Passivation for High‐Performance Sky‐Blue Quasi‐2D Perovskite Light‐Emitting Diodes

Enhanced Efficiency and Stability of Quasi‐2D Perovskite Light‐Emitting Diodes with Crosslinkable Alkenyl Amine Cations

Effect of Mixed Spacer Cation on the Performance of Quasi-2D Blue Perovskite Light-Emitting Diodes

Postdeposition Halide Exchange for Achieving Deep‐Blue Perovskite Light‐Emitting Diodes: The Role of the Organic Cations in the Chloride Source

Exploration of the Defect Passivation in Perovskite Materials Using Organic Spacer Cations

Eliminating Nanocrystal Surface Light Loss and Ion Migration to Achieve Bright Mixed-Halide Blue Perovskite LEDs

Monoammonium Modified Dion-Jacobson Quasi-2D Perovskite for High Efficiency Pure-Blue Light Emitting Diodes.

Regulated Perovskite Crystallization for Efficient Blue Light‐Emitting Diodes via Interfacial Molecular Network

Simultaneous Low-Order Phase Suppression and Defect Passivation for Efficient and Stable Blue Light-Emitting Diodes

Incorporation of a Polyfluorinated Acrylate Additive for High-Performance Quasi-2D Perovskite Light-Emitting Diodes

Bidirectional Inhibiting Interfacial Ion Migration in the Inorganic Hole Transport Layer for Perovskite Light-Emitting Diodes

In-Situ passivation of mixed-halide perovskite nanocrystals for high-performance blue light-emitting diodes

Partially Ionized Amino Acid Salt Enabling Spatially Vertical n‐Phase Distribution of Quasi‐2D Perovskite for Efficient Deep‐Blue Light‐Emitting Diodes

Passivating Buried Interface Via Self-Assembled Novel Sulfonium Salt Toward Stable and Efficient Perovskite Solar Cells