Abstract:By incorporating 1‐cyclohexene‐1‐ethanamine cation into the host 1‐phenylbutylamine cation spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm. Organic and inorganic hybrid perovskites are a class of solution‐processable semiconductors that hold significant promise for light‐emitting diode applications. However, the development of efficient blue perovskite light‐emitting diodes (PeLEDs) has remained a critical challenge. Although significant advancements have been achieved in the development of sky‐blue PeLEDs, the performance of pure‐blue and deep‐blue PeLEDs still lags. In this manuscript, by incorporating 1‐cyclohexene‐1‐ethanamine cation (CEA+) into the host 1‐phenylbutylamine cation (PBA+) spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm, which is one of the highest EQEs among the deep‐blue light quasi‐2D PeLED devices with emission wavelengths below 470 nm, Additionally, the device demonstrates a half‐lifetime of ≈ 25 min. Furthermore, the PeLEDs utilizing mixed‐cation perovskite exhibit a stable electroluminescence (EL) spectrum under varying voltage biases, even when the chlorine content in the halogen sites reaches as high as 30%. Overall, this work offers a novel and promising avenue to achieve both high EQE and a stable EL spectrum in blue‐light quasi‐2D PeLEDs.

Ionic Liquid Passivation for High‐Performance Sky‐Blue Quasi‐2D Perovskite Light‐Emitting Diodes

Manipulating Ionic Behavior with Bifunctional Additives for Efficient Sky‐Blue Perovskite Light‐Emitting Diodes

Simultaneous Low-Order Phase Suppression and Defect Passivation for Efficient and Stable Blue Light-Emitting Diodes

Enhancing energy transfer via inhibition defect density of coupled quasi-2D perovskite layers for efficient sky-blue light-emitting diodes

Improved performance of perovskite light-emitting diodes via bifacial modification

High-Efficiency Sky-Blue Perovskite Light-Emitting Diodes Via the Trade-Off Between the Electron–Phonon Coupling Loss and Defect Passivation

Double Passivation Using Ultra‐Thin Insulators for Improved Stability and Efficiency of Quasi‐2D Perovskite Light Emitting Diodes

High-Performance Blue Quasi-2D Perovskite Light-Emitting Diodes via Balanced Carrier Confinement and Transfer

Energy‐Level Regulation and Low‐Dimensional Phase Rearrangement via a Multifunctional Spacer Group toward Efficient Sky‐Blue Quasi‐2D Perovskite Light‐Emitting Diodes

Highly Efficient Sky-Blue Perovskite Light-Emitting Diode Via Suppressing Nonradiative Energy Loss

Suppressing interfacial nonradiative recombination by alkali hydroxides for efficient blue perovskite light-emitting diodes

Regulating the continuous and concentrated distribution of Quasi-2D perovskite phases to achieve Sky-Blue Light-Emitting diodes with efficiency approaching 17%

Manipulating Crystallization Dynamics for Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes

Post‐Passivation of Perovskite Quantum Dots by Conjugated Molecules for Spectrally Stable and Efficient Deep Blue Light‐Emitting Diodes

Enhanced Efficiency and Stability of Sky Blue Perovskite Light-Emitting Diodes via Introducing Lead Acetate

Interfacial “Anchoring Effect” Enables Efficient Large‐Area Sky‐Blue Perovskite Light‐Emitting Diodes

Efficient Sky‐Blue Light‐Emitting Diodes Based on Oriented Perovskite Nanoplates

Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Reduced Confinement Effect by Isocyanate Passivation for Efficient Sky‐Blue Perovskite Light‐Emitting Diodes

Deep-Blue Perovskite Light-Emitting Diodes Realized by a Dynamic Interfacial Ion Exchange

Regulated Perovskite Crystallization for Efficient Blue Light‐Emitting Diodes via Interfacial Molecular Network