Abstract:Purpose Quality of the weld joint produced by high-frequency induction (HFI) welding of steel tubes is attributed to a number of process parameters. There are several important process parameters such as the speed of the welding line, the angle of the approaching strip edges, the physical configuration of the induction coil, impeder, formed steel strip and weld rolls with respect to each other, the pressure of the weld rolls and frequency of the high-frequency current in the induction coil. The purpose of this paper is to develop a 3D model of tube welding process that incorporates realistic material properties and movement of the strip. Design/methodology/approach 3D numerical simulation by the finite element method (FEM) can be used to understand the influence of these process parameters. In this study, the authors have developed a quasi-steady model along with the coupling of electromagnetic and thermal model and incorporation of non-linear electromagnetic and thermal material properties. Findings In this study, 3D FEM model has been established which gives results in accordance with previously published work on induction tube welding. The effect of the Vee-angle and frequency on the temperature profile created in the strip edge during the electromagnetic heating is studied. Practical implications The authors are now able to simulate the induction tube welding process at a more reasonable computational cost enabling an analysis of the process. Originality/value A 3D model has been developed for induction tube welding. A non-linearly coupled system of Maxwell’s electromagnetic equation and the heat equation is implemented using the fixed point iteration method. The model also takes into account non-linear magnetic and thermal material properties. Adaptive remeshing is implemented to optimise mesh size for the electrical skin depth of induced current in the strip. The model also accounts for the high welding-line speeds which influence the mode of heat transfer in the strip.

Influence Law of Electromagnetic Induction Heating Parameters on the Leveling Effect in Thin Plates

A Study on the Method of Temperature Distribution Control in Electromagnetism Induction Heating

Effects of induction heating coil parameters on the temperature field of the tested subjects

Controlling Voltage Computation in Electromagnetic Induction Heating

3D electromagnetic and thermal field analysis of edge induction heater

Numerical and experimental study of electromagnetic induction heating process for bolted flange joints

Numerical Computation of Coupled Electromagnetic-Thermal Field in an Induction Edge Heater for the Hot Strip Mill

Numerical simulations of strengthen induction heating with response surface methodology

The Establishment Of Coupled Electromagnetic-Thermal Analytical Model Of Induction Heating System With Magnetic Flux Concentrator And The Study On The Effect Of Magnetic Permeability To The Modeling

Analysis and Control on Induction Brazing of Electrical Contact

Influence of Initial Structural Dimensions of Plates on Welding Distortion

Characteristic Analysis of Irregular Workpiece Based on Electromagnetic Induction Heating Technology

Indentation of A Flat Circular Punch with Uniform Heat Flux at Its Base into Transversely Isotropic Magneto-Electro-Thermo-Elastic Half Space

Simulation Of Induction Cookers With Different Structure And Material Parameters By The Finite Element Software

An Investigation of the Induction Heating Forming Process of Hull Curved Plate

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Analysis of Power Supply Heating Effect during High Temperature Experiments Based on the Electromagnetic Steel Teeming Technology

Study on the Plane Induction Heating Process Strengthened by Magnetic Flux Concentrator Based on Response Surface Methodology

Numerical Analysis for Induction Heating Process of Ferromagnetic Materials

Three-dimensional numerical study of heat-affected zone in induction welding of tubes

Numerical simulation of pc steel bar induction heating process