Abstract:Schottky direct-current (DC) generators have gained attention for their ability to produce DC output directly without rectification. However, a major challenge is their limited voltage output, often below 1 V, and difficulty in simultaneously increasing both voltage and current outputs. This study develops a new design concept to improve the voltage and current outputs of a conducting polymer/metal Schottky DC generator by injecting a single type of charges from the Schottky unit's exterior to either its semiconductor or metal components. By utilizing a polyaniline-coated fabric and a metal Al plate to create a Schottky DC generator, as well as a single-mode triboelectric device such as PTFE film-metal Al, PTFE film-PA6 nanofiber membrane, or PA6-Ni/Cu plate as the external charge supplier, we demonstrate that injecting positive tribo charges to the Schottky Al electrode or negative charges to the polyaniline results in a significant increase in both the voltage and current outputs of the Schottky generator. The resultant Schottky unit showcased an exceptional peak open circuit voltage increasing to 4.88±0.20 V, and an equally impressive peak short circuit current output peaking at 154.97±5.20 μA (6.20±0.21 μA/cm 2 ). Remarkably, this configuration delivered an outstanding power density of up to 7.37 μW/cm 2 . These output metrics surpass those of standalone PANI/Al Schottky DC generator counterparts (1.09±0.03 V, 67.32±6.52 μA, and 0.66 μW/cm2), and also surpass most other Schottky DC generators previously reported. Incorporating nano Coulombs of charge into the Schottky generator resulted in an impressive micro Coulombs of charge migration within the Schottky device, achieving a remarkable fourfold amplification of voltage outputs and twofold amplification of current outputs, all while preserving the inherent DC output characteristics intrinsic to Schottky generators. Moreover, we have observed that the amount external tribo charges have a direct relationship with the voltage and current output increases of the Schottky DC generators. These phenomena were consistent, whether introducing positive charges to the Al layer of the Schottky unit or infusing negative charges into the polyaniline layer. Furthermore, alternative triboelectric devices connected to the Schottky generators yielded similar outcomes, thereby corroborating the robustness of our approach. This novel approach shows promise in enhancing power generation efficiency in Schottky DC generators and has potential applications in various fields requiring efficient and direct DC power generation.

Multi‐Effect Coupling Strategy Enables Efficient Charge Excitation and Transfer in Schottky Junction for Direct‐Current Generation

A High Strength Triboelectric Nanogenerator Based on Rigid-Flexible Coupling Design for Energy Storage System

Dynamic Perovskite Homojunction Based Light‐Assisted, Direct Current Tribovoltaic Nanogenerators

Ferroelectric Modulation in Flexible Lead‐Free Perovskite Schottky Direct‐Current Nanogenerator for Capsule‐Like Magnetic Suspension Sensor

Multi‐Effects Coupled Nanogenerators for Simultaneously Harvesting Solar, Thermal, and Mechanical Energies

Tribovoltaic Effect Promotes Highly Efficient Direct-Current Generator

Highly Flexible Tribovoltaic Nanogenerator Based‐on P‐N Junction Interface: Comparative Study on Output Dependency Dominated by Photovoltaic Effect in Freestanding‐Mode

Contact efficiency optimization for tribovoltaic nanogenerator

Simultaneously Enhancing Direct‐Current Density and Lifetime of Tribovotaic Nanogenerator via Interface Lubrication

An effective strategy for promoting charge separation by integrating heterojunctions and multiple homojunctions in TiO2 nanorods to enhance photoelectrochemical oxygen evolution

p-n Junction Based Direct-Current Triboelectric Nanogenerator by Conjunction of Tribovoltaic Effect and Photovoltaic Effect

Tribovoltaic Effect: Origin, Interface, Characteristic, Mechanism & Application

Multieffect Coupled Nanogenerators

Durable Flexible Direct Current Generation through the Tribovoltaic Effect at Contact-Separation Mode

Coupling mechanism between photogenerated carriers and triboelectric charges and photoinduced reinforcement of a triboelectric nanogenerator

Simultaneously scavenging multi-type energies via BaTiO3 film-based coupled nanogenerator with high coupling factors

A Rolling‐Mode Al/CsPbBr3 Schottky Junction Direct‐Current Triboelectric Nanogenerator for Harvesting Mechanical and Solar Energy

Tribovoltaic Nanogenerators Based on MXene‐Silicon Heterojunctions for Highly Stable Self‐Powered Speed, Displacement, Tension, Oscillation Angle, and Vibration Sensors

Boosting Output Performance of Triboelectric Nanogenerator via Mutual Coupling Effects Enabled Photon‐Carriers and Plasmon

Opto-iontronic coupling in triboelectric nanogenerator

Amplifying Electrical Outputs of Polyaniline-Based Schottky DC Generators through Single Polarity Charge Injection