Abstract:The screening process for the electrochemical properties of all 3d, 4d, and 5d transition‐metal‐doped LiMnPO4 structures is described. The screening criteria used are unit cell volume change less than 3% after doping, band gap less than 1 eV after doping, doping formation energy less than 2 eV, better elastic properties than LiMnPO4 after doping, higher isotropy than LiMnPO4 after doping, and lithium/delithium voltage higher than 3.5 V after doping. The Sc‐, Ti‐, V‐, Fe‐, Co‐, Mo‐, Rh‐, Re‐, and Ir (below, green frames)‐doped LiMnPO4 models showed relatively excellent electrochemical properties and met the above screening criteria. Lithium iron phosphate (LiFePO4) has been widely used due to its high theoretical capacity and good cycle stability, but lithium manganese phosphate (LiMnPO4) with a higher operating voltage (4.1 V) has not been used, so it is necessary to conduct theoretical research on its inherent performance improvement strategy. The large‐scale application of LiMnPO4 is limited by its relatively low electronic and ionic conductivity. Improving the electronic and ionic conductivity of electrode materials by selective doping is an effective strategy. To determine the effect of doping of transition metals on the electrochemical properties of LiMnPO4 and to screen out doping models of cathode materials with excellent battery performance, we established all 3d, 4d, and 5d transition‐metal doping models of LiMnPO4. Through screening by first principles, the structural properties, band gap, doping formation energy, elastic properties, isotropy, and lithium/delithium voltage of the above models were compared and analyzed. According to the screening results, LiMnPO4 doped with Sc, Ti, V, Fe, Co, Mo, Rh, Re, and Ir has excellent electrochemical properties and can be used as a good cathode material for lithium‐ion batteries; the inherent mechanism of the above materials is revealed.

Electronic structure and delithiation mechanism of vanadium and nickel doped Li2MnPO4F cathode material for lithium-ion batteries

First-principles study of cathode material LiMnPO4F for lithium-ion batteries

Ab initio study of lithium transition metal fluorophosphate cathodes for rechargeable batteries

First‐Principles Investigations of Lithium Manganese Phosphate Cathode Materials: Advances and Prospects

A joint experimental and theoretical study on the effect of manganese doping on the structural, electrochemical and physical properties of lithium iron phosphate

A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries

Construction of oriented-rod structure Ni, Mn co-doped vanadium oxide ternary materials synthesized by a facile coprecipitation method as high-performance cathode active material for lithium-ion capacitive-batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Revelation of the transition‐metal doping mechanism in lithium manganese phosphate for high performance of lithium‐ion batteries

P-doping boosting electronic properties and ionic kinetics of MnV2O6 for high-performance lithium-ion batteries

First-principles calculations to investigate the impact of fluorine doping on electrochemical properties of Li-rich Li2MnO3 layered cathode materials

Insight into structural and electrochemical properties of Mg‐doped LiMnPO4/C cathode materials with first‐principles calculation and experimental verification

LiMn2O4 cathodes with F anion doping for superior performance of lithium-ion batteries

Electronic Structure of Ni-doped Spinel LiMn_2O_4 Cathode Material for Lithium Ion Battery

The Effect of Vanadium on Physicochemical and Electrochemical Performances of LiFePO[sub 4] Cathode for Lithium Battery

Research Progress on Lithium-Rich Manganese-Based Lithium-Ion Batteries Cathodes

Doping Li-rich cathode material Li$_2$MnO$_3$: Interplay between lattice site preference, electronic structure, and delithiation mechanism

In-situ Synchrotron X-ray Absorption Studies of LiMn0.25Fe0.75PO4 As a Cathode Material for Lithium Ion Batteries

Nanostructured Mn-Doped V2O5 Cathode Material Fabricated from Layered Vanadium Jarosite

A critical revelation of lithium ferromanganese phosphate (LMFP) performance in a Mn-rich cathode for Li-ion batteries using Fe equivalents to occupy a Mn site

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries