Abstract:Arising from concerns of continuously deteriorating environmental issues, worldwide efforts are dedicated to developing more sophisticated energy storage techniques to replace traditional nonrenewable sources. Given the significant greenhouse gas emissions that occur coincident with current battery production and operation, the introduction of agricultural waste rice hull ash (RHA), a byproduct of biomass combustion, as a source for battery components could facilitate the actual realization of green and sustainable energy storage. Herein, we focus on using RHA to produce SiC with hard carbon (HC) nanocomposites and their mixtures with graphite as Li + battery anodes. Using a simple method developed in our laboratories to control SiO 2 :HC ratios, the intrinsic nanoscale mixing of SiO 2 and HC in RHA provides a natural starting material for carbothermal reduction producing high purity SiC without the need to add an external carbon source. The optimized SiC/HC nanocomposites contain ≈13 wt. % HC, showing BET surface areas >200 m 2 /g. We previously reported the SiC/HC nanocomposites derived from RHA exhibit charge/discharge capacities 3× of current graphite anodes at > 950 mAh g -1 , accompanied by distinct capacity increases. In particular, SiC can be lithiated to Li 1.1-1.4 SiC without forming Li x Si or Li x C. Investigations of the lithiation/delithiation mechanisms using multiple techniques coupled with modeling suggest a cubic (3C-SiC) to hexagonal phase transition (6H-SiC) after long-term cycling, which may explain the origins of extraordinary capacity increments. Moreover, lithiation/delithiation occur without significant volume changes according to XRD and SEM, suggesting that SiC can compete with metallic Si as an anode material as free volumes equivalent to 3× the charged Si are required. Most recently, inspired by the developed concept of adding graphite to improve the performance of silicon-based anodes, we find adding graphite to SiC/HC nanocomposites results in a 3× improvement in capacity increases on cycling, reaching >950 mAh g -1 after 150 cycles. The proposed interactions within the composites will also be addressed in this presentation. It should be noted most silicon/graphite composite anodes use low Si contents of < 30 wt. % to limit the total electrode volume expansion and ensure contacts and conductivities between components, which restrains the practical energy density improvements from using Si in the anodes. In comparison, mixing only 30 wt. % graphite with SiC/HC in the current work results in specific capacities competitive with Si. Furthermore, Si metal can be synthesized via the carbothermal reduction at ≈1900 °C, while battery-grade graphite used today is produced in an environmentally harmful and expensive multistep method that involves heating to ≈3000 °C. The SiC/HC need only be heated to 1450 °C, with hard carbon forming coincidentally providing positive effects on anode performance. In this aspect, directly using SiC/HC or adding a low amount of graphite to further boosts its performance in an apparently more environmentally friendly route to alternative anodes.

Life cycle assessment of bio-based hard carbon for sodium-ion batteries across different production scales

A Life Cycle Assessment of Hard Carbon Anodes for Sodium-Ion Batteries

Revitalizing Sodium-Ion Batteries Via Controllable Microstructures and Advanced Electrolytes for Hard Carbon

Two-step Synthesis of Hard Carbons Anode Material from Poplar Wood with Enhanced Performance for Sodium-Ion Batteries

Sustainable and scalable fabrication of high-performance hard carbon anode for Na-ion battery

Assessing the Reactivity of Hard Carbon Anodes: Linking Material Properties with Electrochemical Response Upon Sodium‐ and Lithium‐Ion Storage

Temperature effects on hard carbon derived from sawdust as anode materials for sodium ion batteries

Hard Carbon Derived From Different Precursors for Sodium Storage

Sodium‐Ion Batteries: Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance (adv. Funct. Mater. 24/2019)

Hard Carbon as Sodium-Ion Battery Anodes: Progress and Challenges.

Research Progress and Commercialization of Biologically Derived Hard Carbon Anode Materials for Sodium-Ion Batteries

Biomass-Derived Hard Carbon for Sodium-Ion Batteries: Basic Research and Industrial Application

Optimizing Hard Carbon Materials for Sodium-Ion Batteries: Insights from Particle Size and Soft Carbon-Coating Strategy

High-yield Humic Acid-Based Hard Carbons As Promising Anode Materials for Sodium-Ion Batteries

Hard-Carbon Negative Electrodes from Biomasses for Sodium-Ion Batteries

Deciphering Electrolyte Dominated Na+ Storage Mechanisms in Hard Carbon Anodes for Sodium‐Ion Batteries

Use of Hydrothermal Carbonization to Improve the Performance of Biowaste-Derived Hard Carbons in Sodium Ion-Batteries

Understanding the Sodium Storage Behavior of Closed Pores/Carbonyl Groups in Hard Carbon

Low-Cost and High-Performance Hard Carbon Anode Materials for Sodium-Ion Batteries

Green Silicon Carbide (SiC) and SiC/Graphite Composite Anodes for Lithium-Ion Batteries

Sustainable Fabrication of a Practical Hard Carbon Anode for a Sodium-Ion Battery with Unprecedented Long Cycle Life