Energy performance and flow characteristics of a pump-turbine under pump mode at different guide vane openings

Hang Xie,Xingqi Luo,Jianjun Feng,Guojun Zhu,Like Wang
DOI: https://doi.org/10.1016/j.est.2024.112743
IF: 9.4
2024-07-06
Journal of Energy Storage
Abstract:In order to meet the needs of the power grid, the operating conditions of the pump turbine are often far away from the design condition. It leads to a decrease in efficiency and an increase in hydraulic loss. In this paper, the energy characteristics and flow field in the pump-turbine under different guide vane openings are studied by numerical simulation and the local-regional energy loss analysis method. The results show that energy loss is mainly concentrated in three parts: the impeller, guide and stay vanes. At small guide vane opening(GVO), the proportion of the impeller loss is about 20 %, which is mainly caused by flow separation at the inlet and water-ring phenomenon at the outlet. The proportion of the guide and stay vanes loss gradually increases with the increase in flow rate, reaching as high as 55 % under the large flow rate. At large GVO condition, the proportion of the impeller loss gradually increases and reaches to 47 % with the increase of flow rate. While the loss in guide and stay vanes decreases gradually. The water ring is the main reason for high hydraulic loss at the vaneless region under low flow rate conditions. At small GVO condition, the main reason for the formation of water ring is that the high circumferential velocity and low streamwise velocity in the impeller outlet, which causes the water to flow along the circumferential direction before entering the guide vane. At large GVO condition, the flow separation occurs on the guide vane suction surface and forms the channel vortex, which forces the incoming flow to deflect circumferentially and forms the water ring.
energy & fuels
What problem does this paper attempt to address?