Abstract:PurposeThis paper aims to propose a framework for optimizing the pose in the assembly process of the non-ideal parts considering the manufacturing deviations and contact deformations. Furthermore, the accuracy of the method would be verified by comparing it with the other conventional methods for calculating the optimal assembly pose. Design/methodology/approachFirst, the surface morphology of the parts with manufacturing deviations would be modeled to obtain the skin model shapes that can characterize the specific geometric features of the part. The model can provide the basis for the subsequent contact deformation analysis. Second, the simulated non-nominal components are discretized into point cloud data, and the spatial position of the feature points is corrected. Furthermore, the evaluation index to measure the assembly quality has been established, which integrates the contact deformations and the spatial relationship of the non-nominal parts' key feature points. Third, the improved particle swarm optimization (PSO) algorithm combined with the finite element method is applied to the process of solving the optimal pose of the assembly, and further deformation calculations are conducted based on interference detection. Finally, the feasibility of the optimal pose prediction method is verified by a case. FindingsThe proposed method has been well suited to solve the problem of the assembly process for the non-ideal parts with complex geometric deviations. It can obtain the reasonable assembly optimal pose considering the constraints of the surface morphological features and contact deformations. This paper has verified the effectiveness of the method with an example of the shaft-hole assembly. Research limitations/implicationsThe method proposed in this paper has been well suited to the problem of the assembly process for the non-ideal parts with complex geometric deviations. It can obtain the reasonable assembly optimal pose considering the constraints of the surface morphological features and contact deformations. This paper has verified the method with an example of the shaft-hole assembly. Originality/valueThe different surface morphology influenced by manufacturing deviations will lead to the various contact behaviors of the mating surfaces. The assembly problem for the components with complex geometry is usually accompanied by deformation due to the loading during the contact process, which may further affect the accuracy of the assembly. Traditional approaches often use worst-case methods such as tolerance offsets to analyze and optimize the assembly pose. In this paper, it is able to characterize the specific parts in detail by introducing the skin model shapes represented with the point cloud data. The dynamic changes in the parts' contact during the fitting process are also considered. Using the PSO method that takes into account the contact deformations improve the accuracy by 60.7% over the original method that uses geometric alignment alone. Moreover, it can optimize the range control of the contact to the maximum extent to prevent excessive deformations.

Multi-objective optimization of parts construction direction by scaling-enumeration method in L-PBF process

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Multi-objective Robust Optimization of Injection Molding Process Parameters Based on TOPSIS

Multiobjective Optimization of Injection Molding Parameters Based on Soft Computing and Variable Complexity Method

Building Orientation Determination Based On Multi-Objective Optimization For Additive Manufacturing

Optimization of surface roughness and dimensional accuracy in LPBF additive manufacturing

Model-Free Quality Optimization Strategy for a Batch Process with Short Cycle Time and Low Operational Cost

Build orientation determination of multi-feature mechanical parts in selective laser melting via multi-objective decision making

Reliability-Based and Cost-Oriented Product Optimization Integrating Fuzzy Reasoning Petri Nets, Interval Expert Evaluation and Cultural-Based DMOPSO Using Crowding Distance Sorting

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy

An appropriate approach of design and machining of mechanical part by means of probabilistic multi‐objective optimization

Multi-Objective Optimization of the Part Building Orientation in Stereolithography

The Multi-objective Optimization for the SLS Process Parameters Based on Analytic Hierarchy Process

Multi‐objective Bayesian modeling and optimization of 3D printing process via experimental data‐driven method

Optimization Method for the Assembly Pose of Parts Considering Manufacturing Deviations and Contact Deformations

Multi-objective process route optimization considering carbon emissions

Multi objective optimization and evaluation approach of prefabricated component combination solutions using NSGA-II and simulated annealing optimized projection pursuit method

Multiobjective Optimization of Injection Molding Process Parameters for the Precision Manufacturing of Plastic Optical Lens

The Product-Mix Optimization with Outside Processing Based on Theory of Constraints Oriented Cloud Manufacturing

Intelligent optimization system for powder bed fusion of processable thermoplastics

A novel layer-based optimization method for stabilizing the early printing stage of LPBF process