A novel layer-based optimization method for stabilizing the early printing stage of LPBF process

Liping Ding,Jiacheng Liu,Shujie Tan,Yongtao Zhang,Cong Fan,Samuel Gomes,Yicha Zhang

DOI: https://doi.org/10.1080/17452759.2024.2325578

IF: 10.6

2024-03-21

Virtual and Physical Prototyping

Abstract:The laser power bed fusion (LPBF) forming process introduces heat accumulation and variations in powder layer thickness, which can destabilize the melt track and reduce surface quality. This phenomenon is especially more serious in the early printing stage. To tackle this stability problem, we proposed a novel approach optimizing process parameters on a layer-specific basis. At first, a numerical database was constructed through a set of numerical simulations. Then, a neural network prediction model was trained based on the database. Finally, this prediction model was embedded into a genetic algorithm for layer-based prediction. To verify the prediction results on processing parameters and calibrate the prediction model, physical experiments were prepared. The developed model consistently exhibited relative errors mostly within 6%. It is noteworthy that the relative errors between the numerical simulation results and the expected values were only 0.77% in width and 1.11% in depth. Printing optimization test was applied for an LPBF machine with a Invar alloy powder. The proposed method yielded positive results in both numerical simulations and the printing test. It can be further adopted for new material printing parameter optimization due to an efficient printing stability in the early-stage for LPBF process.

engineering, manufacturing,materials science, multidisciplinary

What problem does this paper attempt to address?

This paper attempts to address the issue of melt pool instability caused by thermal accumulation effects during the early stages of the Laser Powder Bed Fusion (LPBF) process. Specifically: 1. **Problem Background**: In the LPBF process, metal powder is melted and solidified layer by layer using a laser. However, this process introduces thermal accumulation and changes in powder layer thickness, which can lead to instability in the melt pool trajectory and reduce surface quality. This phenomenon is particularly severe during the initial stages of printing. 2. **Research Objective**: To address this stability issue, the researchers proposed a new layer-by-layer optimization method. First, a database was constructed through a series of numerical simulations; then, a neural network prediction model was trained based on this database; finally, this prediction model was embedded into a genetic algorithm for layer-by-layer parameter optimization. 3. **Experimental Validation**: To validate the prediction results and calibrate the prediction model, the researchers conducted physical experiments. The developed model showed a relative error mainly within 6%. Notably, the relative error between the numerical simulation results and the expected values was only 0.77% in width and 1.11% in depth. Additionally, printing optimization tests were conducted on the LPBF machine using Invar alloy powder, and the results showed positive outcomes in both numerical simulations and printing tests. In summary, this paper aims to stabilize the early stages of the LPBF process through a novel layer-by-layer optimization method, thereby improving printing quality and efficiency.

A novel layer-based optimization method for stabilizing the early printing stage of LPBF process

Parameter Automatic Optimization Strategy for Laser Powder Bed Fusion Using Neural Network Infrared Radiation Intensity Prediction Model

A Finite Volume-Based Thermo-Fluid-mechanical Model of the LPBF Process

Layer-to-Layer Melt Pool Control in Laser Powder Bed Fusion

Encoding Stability into Laser Powder Bed Fusion Monitoring Using Temporal Features and Pore Density Modelling

Towards supportless laser powder bed fusion: fundamental understanding of the formation of 1st layer overhang through parameter optimisation and in-situ high-speed thermal imaging

In-situ Controller Autotuning by Bayesian Optimization for Closed-loop Feedback Control of Laser Powder Bed Fusion Process

Optimization of surface roughness and dimensional accuracy in LPBF additive manufacturing

Numerical Investigation into the Effect of Different Parameters on the Geometrical Precision in the Laser-Based Powder Bed Fusion Process Chain

Layer-wise Surface Quality Improvement in Laser Powder Bed Fusion Through Surface Anomaly Detection and Control

A novel paradigm for feedback control in LPBF: layer-wise correction for overhang structures

Prediction of mechanical properties of LPBF built part based on process monitoring and Gaussian process regression

A Mechanism-based Optimization Strategy with Adaptive Laser Power for Laser Powder Bed Fusion

A data-driven framework to improve the wear resistance of a low-alloy steel fabricated by laser powder bed fusion

An Optimized Scanning Strategy to Mitigate Excessive Heat-Accumulation Caused by Short Scanning-Lines in Laser Powder Bed Fusion Process

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Research on an Online Monitoring Device for the Powder Laying Process of Laser Powder Bed Fusion

Overview of Finite Elements Simulation of Temperature Profile to Estimate Properties of Materials 3D-Printed by Laser Powder-Bed Fusion*

Intelligent optimization system for powder bed fusion of processable thermoplastics

Design Optimization and Finite Element Model Validation of LPBF-Printed Lattice-Structured Beams

Development of optimal L-PBF process parameters using an accelerated discrete element simulation framework