Abstract:Due to the inherent characteristics of traditional graphite anode material, its lithium diffusion kinetic is significantly constrained, easily leading to a noticeable capacity degradation during rapid charge/discharge cycling. Although modifying the graphite by mixing the hard carbon can effectively enhance its fast-charging performance, yet the underlying mechanism of improvement effect and structure design of interface are still needed to further investigate. To address this research gap, hard carbon-coated graphite (HCCG) material has been designed and synthesized through simple interface engineering, which is aimed to explore and elucidate the optimization mechanisms on fast-charging performance from the graphite interface perspective. According to the electrochemical calculations, the HCCG anode exhibits significant enhancements. Specially, its reversible lithium content is increased by approximately 8 % at various states of charge, its exchange current density is tripled, and its Tafel slope is reduced to one-quarter of the original graphite. Therefore, the HCCG maintains an impressive 86.89 % capacity retention and a high capacity of 202.3 mAh g-1 after 1450 cycles at ultrahigh rate of 5C. These improvements indicate a substantial reduction in electrode polarization during fast charging, which is ascribed to the abundant lithium intercalation pathways and accommodation space provided by the intimate hard carbon coating layer. Moreover, as a "buffer layer," hard carbon coating can accommodate considerable amount of lithium deposited on the graphite surface, effectively mitigating the capacity loss caused by lithium deposition and maintaining effective electrochemical contact without delamination. This comprehensive analysis of hard carbon coating illustrates the improvement mechanism of fast-charging performance, which can offer valuable insights into the dynamic and structural optimization of graphite anode interfaces.

A Fast‐Charge Graphite Anode with a Li‐Ion‐Conductive, Electron/Solvent‐Repelling Interface

50C Fast‐Charge Li‐Ion Batteries Using a Graphite Anode

50C Fast‐charge Li‐ion Batteries Using Graphite Anode

Reversible Li Plating on Graphite Anodes through Electrolyte Engineering for Fast-Charging Batteries.

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

A cooperative biphasic MoOx–MoPx promoter enables a fast-charging lithium-ion battery

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Rapid Lithium Diffusion in Order@Disorder Pathways for Fast‐Charging Graphite Anodes

A Nonstoichiometric Niobium Oxide/Graphite Composite for Fast‐Charge Lithium‐Ion Batteries

Interface optimization mechanism and quantitative analysis of hybrid graphite anode for fast-charging lithium-ion batteries

Fast-charging Capability of Graphite-Based Lithium-Ion Batteries Enabled by Li 3 P-based Crystalline Solid–electrolyte Interphase

Multi‐Interface Strategy for Electrode Tailoring Toward Fast‐Charging Lithium‐Ion Batteries

Tuning Rate‐Limiting Factors for Graphite Anodes in Fast‐Charging Li‐Ion Batteries

Inhibiting Solvent Co‐Intercalation in a Graphite Anode by a Localized High‐Concentration Electrolyte in Fast‐Charging Batteries

Surface fluorinated graphite suppressing the lithium dendrite formation for fast chargeable lithium ion batteries

Kinetic Limits of Graphite Anode for Fast-Charging Lithium-Ion Batteries

Electrolyte Optimization for Graphite Anodes Toward Fast Charging

A safe and fast-charging lithium-ion battery anode using MXene supported Li3VO4

A unique redox active ion-electron conductor enabled 5C fast-charging graphite anode for lithium-ion batteries

Correlating Graphite Surface with Interphase for Fast‐Charging and Low‐Temperature Operation

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries