Pressure-Induced Critical Influences on Workpiece-Tool Thermal Interaction in High Speed Dry Machining of Titanium

H.A. Abdel-Aal,M. El Mansori

DOI: https://doi.org/10.48550/arXiv.1008.1361

2010-08-08

Abstract:Cutting tools are subject to extreme thermal and mechanical loads during operation. The state of loading is intensified in dry cutting environment especially when cutting the so called hard-to-cut-materials. Although, the effect of mechanical loads on tool failure have been extensively studied, detailed studies on the effect of thermal loads on the deterioration of the cutting tool are rather scarce. In this paper we study failure of coated carbide tools due to thermal loading. The study emphasizes the role assumed by the thermo-physical properties of the tool material in enhancing or preventing mass attrition of the cutting elements within the tool. It is shown that within a comprehensive view of the nature of conduction in the tool zone, thermal conduction is not solely affected by temperature. Rather it is a function of the so called thermodynamic forces. These are the stress, the strain, strain rate, rate of temperature rise, and the temperature gradient. Although that within such consideration description of thermal conduction is non-linear, it is beneficial to employ such a form because it facilitates a full mechanistic understanding of thermal activation of tool wear.

Materials Science

What problem does this paper attempt to address?

This paper attempts to solve the problem of tool failure due to thermal load during high - speed dry cutting of titanium materials. Specifically, the research focuses on how thermophysical properties (such as thermal conductivity and electrical conductivity) affect or prevent the mass loss of tool materials, especially the influence of the changes of these properties on heat conduction and tool wear mechanisms in a high - pressure environment. The paper emphasizes the influence of thermodynamic forces (such as stress, strain, strain rate, temperature rise rate and temperature gradient) on heat conduction, and points out that this non - linear description is helpful for a comprehensive understanding of the thermally - activated tool wear mechanism.

### Main research questions in the paper:
1. **The influence of thermal load on tool failure**: Although the influence of mechanical load on tool failure has been widely studied, the influence of thermal load on tool degradation has been less studied. In this paper, by studying the failure of coated carbide tools under thermal load, the role of thermophysical properties in preventing tool mass loss is explored.
2. **Changes in thermal conductivity and their influence**: The changes in the thermal conductivity of titanium materials in a high - temperature and high - pressure environment are studied, and the influence of these changes on heat conduction and tool wear during the cutting process is analyzed.
3. **The role of thermodynamic forces**: The comprehensive influence of thermodynamic forces (such as stress, strain, strain rate, temperature rise rate and temperature gradient) on heat conduction is explored, and it is pointed out that heat conduction is not only affected by temperature, but also by the combined action of these thermodynamic forces.
4. **The influence of pressure on thermal conductivity and electrical conductivity**: The influence of a high - pressure environment on the thermal conductivity and electrical conductivity of titanium materials is studied, especially the reverse influence of the change in thermal conductivity caused by pressure on electrical conductivity through the Weidmann - Franz - Lorenz law (WFL).
5. **Numerical simulation and experimental verification**: Through finite - element simulation, the changes in the pressure and temperature fields in the tool - workpiece contact area during the cutting process are studied, and the validity of the model is verified by using experimental data.

### Formula presentation:
1. **Definition of effective thermal conductivity**:
\[
K_{\text{eff}}(\sigma, \eta, e_0, T_0, T) = K_0 \left(1 + \Phi \right)
\]
where:
- \( K_0 \) is the initial thermal conductivity
- \( \Phi \) is a correction coefficient, reflecting the comprehensive influence of the loading mode
- \( \sigma \) is stress
- \( \eta \) is the thermodynamic coupling factor
- \( e_0 \) is the initial strain rate
- \( T_0 \) is the initial temperature
- \( T \) is the current temperature

2. **Temperature dependence of thermal conductivity**:
\[
K(T) = K_0 \left(1 + \beta T\right)
\]
where:
- \( \beta \) is the temperature coefficient of thermal conductivity

3. **Thermodynamic coupling factor**:
\[
\eta = \frac{\alpha^2}{C_p} \cdot \frac{T}{K_b}
\]
where:
- \( \alpha \) is the coefficient of thermal expansion
- \( C_p \) is the specific heat capacity
- \( K_b \) is the bulk modulus of the material

4. **Comprehensive influence model of thermal conductivity**:
\[
K_{\text{eff}}(P, T) = Y + aP + bT + cP^2 + dT^2
\]
where:
- \( Y \) is a constant
- \( a, b, c, d \) are regression coefficients

Through these studies, the paper aims to provide a more comprehensive understanding of the influence of thermal load on tool performance and the underlying physical mechanisms during high - speed dry cutting of titanium materials.