Abstract:The ELISE test facility at IPP Garching hosts a RF H-/D- ion source and an acceleration system. Its target is to demonstrate the performance foreseen for the ITER NBI system in terms of extracted current density (H/D), fraction of co-extracted electrons and pulse duration. The size of the ELISE extraction area is half that foreseen for the ITER NBI. This paper presents a detailed study of the ELISE beam divergence and uniformity. In particular, it was possible to describe the beam as the sum of two components at very different divergence: about 2{\deg} vs. 5{\deg}{\div}7{\deg}. As test cases, the beam properties have been measured as function of two source parameters. The first one is the current flowing through the grid facing the plasma, the Plasma Grid, in order to generate the magnetic filter field. The second one is the bias current flowing between the Plasma Grid and the source walls. Both the filter field and the bias current influence the fraction of co-extracted electrons, but also the properties of the plasma just in front of the extraction system and the beam properties. The divergence and the uniformity of the beam have been measured by a Beam Emission Spectroscopy (BES) diagnostic; the detailed analysis of the raw spectra collected by BES led to describing the beam with two components of different divergence. This concept has been supported by the information given by thermal imaging of the diagnostic calorimeter. Further support to the proposed beam model has been found in the behavior of the currents flowing in the acceleration system and beamline components; these currents are given by the most divergent (charged) particles of the beam.

Studies on the Electron Reconstruction Efficiency for the Beam Calorimeter of an ILC Detector

Separation of two electromagnetic or electromagnetic - hadronic showers in CALICE SiW ECAL and ILD

Development of Future Electromagnetic Calorimeter Technologies and Applications for the Electron-Ion Collider with GEANT4 Simulations

Reconstruction and Simulation of the Performance of the Electromagnetic Calorimeter on MPD

Latest R\&D news and beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

The ILD/CALICE Silicon-Tungsten Electromagnetic Calorimeter: status and potential

Shower Leakage Correction in a High Granularity Calorimeter

Experimental methods and prospects on the measurement of electroweak $b$ and $c$-quark observables at the ILC operating at 250 GeV

Energy Reconstruction of Hadronic Showers at the CERN PS and SPS Using the Semi-Digital Hadronic Calorimeter

Detailed studies of hadronic showers and comparison to GEANT4 simulations with data from highly granular calorimeters

Beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

Simulation studies related to the particle identification by the forward and backward RICH detectors at Electron Ion Collider

Calorimetry for ILC Experiments: CALICE Collaboration R&D

Monte Carlo based studies of a polarized positron source for International Linear Collider (ILC)

NaI (Tl) Calorimeter Calibration and Simulation for Coulomb Sum Rule Experiment in Hall-A at Jefferson Lab

Analysis of SiW-ECAL technological prototype beam test with electron beam

Particle Showers in a Highly Granular Hadron Calorimeter

Updated Results of a Solid-State Sensor Irradiation Study for ILC Extreme Forward Calorimetry

Beam characterization by means of emission spectroscopy in the ELISE test facility

Status of Dual-Readout Calorimetry for Future High-Energy Physics Experiments

Improving the Spatial Resolution of NICA/MPD ECAL with New Reconstruction Methods