Abstract:Numerous studies have focused on numerical investigations of the performance of the shell-and-tube Latent Heat Thermal Energy Storage (LHTES). However, many studies have often overlooked rigorous assessment of key parameters' impact on the numerical simulation accuracy relative to experimental results. Therefore, this paper aims to develop a numerical model to track the solid–liquid interface during phase-changing phenomena in a horizontal LHTES system and investigate the effects of key parameters on the simulation accuracy. For this purpose, an experimental facility was built, and the numerical model was developed in ANSYS using the enthalpy-porosity method. During the simulation of the computational model, consideration was given to thermophysical properties (constant versus variable) of phase change material, contact resistance (zero versus nonzero), and the mushy zone constant (10 5 , 5 × 10 5 , and 10 6 ). The simulation results were compared with experimental data obtained from the in-house studies. The results showed that, compared to using constant thermophysical properties, employing variable thermophysical properties more accurately tracked the solid–liquid interface during melting. It substantially improved the simulation accuracy with a Root Mean Square (RMS) error less than 5 % for most of the temperature-measuring locations. Conversely, variable properties did not make a significant difference in the solidification process. The contact resistance due to the air gap was determined to be 0.035 m 2 ·K/W for the current study. Furthermore, incorporating this resistance resulted in a more accurate approximation of the solid–liquid interface during melting, with RMS errors below 5 % across all locations. The study comparing different mushy zone constants recommended utilizing a slightly higher value of 10 6 for melting, whereas its impact on solidification was found to be insignificant.

Numerical modelling of thermal hysteresis in melting and solidification of phase change materials

A New Model of Phase Change Process for Thermal Energy Storage

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Parametric Study on Melting Process of a Shell-and-tube Latent Thermal Energy Storage under Fluctuating Thermal Conditions

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Sensitivity Analysis Of Thermophysical Properties On Pcm Selection Under Steady And Fluctuating Heat Sources: A Comparative Study

Numerical Study of Thermal Conductivity Effect on The Performance of Thermal Energy Storage

A monolithic model of solid–liquid phase change problem

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Numerical Analysis on a Latent Thermal Energy Storage System with Phase Change Materials and Aluminum Foam

Numerical Simulation On Melting And Solidification Of A Phase-Change Material In An Aluminum Plate-Fin Thermal Storage

Numerical study on latent heat thermal energy storage with phase change material and metal foam in shell and corrugated tube with external heat losses

Impact of key parameters on the numerical modelling of Phase-Changing phenomena in horizontal latent heat thermal energy storage

Numerical Analysis of New PCM Thermal Storage Systems

Phase Change Material numerical simulation: enthalpy-porosity model validation against liquid fraction data from an X-ray computed tomography measurement/system

A novel numerical study on the melting process of phase change materials in a heat exchanger for energy storage

A solid–liquid model based on lattice Boltzmann method for phase change material melting with porous media in cylindrical heat exchangers

A low Mach enthalpy method to model non-isothermal gas-liquid-solid flows with melting and solidification

Analysis of heat transfer and fluid flow during the melting process of PCM within tubular thermal energy storage unit

Theoretical study on melting of phase change material by natural convection

Numerical investigation on thermal behaviors of two-dimensional latent thermal energy storage with PCM and aluminum foam