Abstract:An optimum drying routine for producing non-sulphited mango slices has been developed. The interaction of essential drying parameters (air temperature, air velocity, dew point, slice thickness and drying time) on water activity (aW) and browning was determined. Microbiological stability of the dried product was achieved at a moisture content of 17% wet base (w.b.) corresponding to aW=0.6. Browning was monitored by the red colour shade of the product (CIE-Lab chromaticity coordinate a*). Drying air temperature and drying time were shown to be the primary factors influencing product colour and aW. In contrast to common practice, drying for about 6 h at elevated air temperature (80 °C), instead of 50 or 60 °C for a longer time, was optimal, since significant colour changes of the mango slices were not observed even without the use of any chemical or thermal pre-treatment. Moreover, at increased temperature, drying time was considerably shortened from about 9 h to 6 h, resulting in significant extension of the drying capacity.Industrial RelevanceThe suggested process concept for dried mango slices based on high-temperature drying is of utmost significance for the international marketing of dried fruit products. Chemical pre-treatments such as sulphitation often used to minimise quality deficiencies could be avoided. Sulphitation has been recently under critical consideration with respect to allergen labelling of foodstuffs implemented by EU-Member States in November 2004 (Directive 2003/89/EC) [Directive 2003/89/EC. Official Journal of the European Union, 25.11.2003, pp. L308/15–18 (http://europa.eu.int/eur-lex/pri/en/oj/dat/2003/l_308/l_30820031125en00150018.pdf)]. Export quality was improved and the drying process simplified, improving the utilisation of drying capacities. Particularly referring to an application of the technology in small- and medium-sized enterprises with limited investment possibilities, the suggested novel drying procedure in mango processing aimed at the optimisation of well-established simple drying methods instead of choosing technically more sophisticated technologies.

Infrared Drying of Bocaiuva (Acrocomia aculeata) Slices: Drying Kinetics, Energy Consumption, and Quality Characteristics

Thick layer drying and storage of rice grain cultivars in silo-dryer-aerator: Quality evaluation at low drying temperature

Dehydration of infrared ginger slices: heat and mass transfer coefficient and modeling

Acerola processing waste: Convective drying with ethanol as pretreatment

The Temperature Influence on Drying Kinetics and Physico-Chemical Properties of Pomegranate Peels and Seeds

Drum drying process of jabuticaba pulp using corn starch as an additive

Impact of pretreatments with ethanol and freezing on drying slice papaya: drying performance and kinetic of ultrasound-assisted extraction of phenolics compounds

Infrared radiation drying of parboiled rice: Influence of temperature and grain bed depth in quality aspects

Drying Kinetic of Oven and Cabinet Dried Red Date Fruit

Drying kinetics of two fruits Portuguese cultivars (Bravo de Esmolfe apple and Madeira banana): An experimental study

Effects of the spray-drying process using maltodextrin on bioactive compounds and antioxidant activity of the pulp of the tropical fruit açai (Euterpe oleracea Mart.)

Quality improvement of non-sulphited mango slices by drying at high temperatures

AVALIAÇÃO DA DEGRADAÇÃO TÉRMICA DO CAROÇO DE ABACATE RESIDUAL PARA A PRODUÇÃO DE BIOCARVÕES

Chemical composition, vitamins, and minerals of family farming biribiri (Averrhoa bilimbi L.) in the Middle Doce River region, Minas Gerais, BrazilTítulo 12

Short- and Medium-Wave Infrared Drying of Cantaloupe (Cucumis melon L.) Slices: Drying Kinetics and Process Parameter Optimization

Comparison of different drying technologies for brocade orange (Citrus sinensis) peels: Changes in color, phytochemical profile, volatile, and biological availability and activity of bioactive compounds

A Comparative Study of Drying Technologies for Apple and Ginger Pomace: Kinetic Modeling and Antioxidant Properties

Bacuri (Platonia insignis Mart.): Nutritional values, volatile compounds, rheological properties, health benefits, and potential products

Biopolymers to overcome challenges in açaí pulp drying: Processing and powder quality evaluation

Shelf Life of Bioactive Compounds from Acerola Pulp (Malpighia spp.) through Freeze-Drying and Microencapsulation

Effect of Combined Infrared Hot Air Drying on Yam Slices: Drying Kinetics, Energy Consumption, Microstructure, and Nutrient Composition