Abstract:Manganese oxides and carbon materials are both desirable catalysts for persulfate (PS) advanced oxidation processes in environmental remediation. Nevertheless, manganese oxides suffer from low reusability while carbon materials face the problem of limited catalytic efficiency. For the purpose of making full use of the advantages of the two materials as well as avoiding their shortcomings, carbon-coated Mn3O4 composites (Mn3O4/C) with a regular nanocube structure were designed to activate PS for the removal of organics, and the catalytic processes were deeply investigated. The catalyst prepared at 400 °C with a precursor ratio (glucose/KMnO4) of 0.5 exhibited the best catalytic performance along with satisfactory reusability owing to the protection of the outer carbon layer. According to experimental results and density functional theory calculation, there were van der Waals interaction and a part of the strong attraction between the interface of PS and Mn3O4/C, which could be enhanced by inner Mn3O4 and thus promoted the electron transfer between PS and carbon shell, and the defective edges of the carbon layer with hydroxyl (C–OH) groups could act as active sites for PS activation. Radical (SO4•–, •OH) and nonradical (1O2) oxidation processes both participated in the degradation of 2,4-dichlorophenol, in which •OH was dominating. This study not only proposed a promising catalyst for the degradation of pollutants but also expanded research ideas for future PS activation mechanism studies by integrating the experiment and simulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04049?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04049</a>.Experimental detection method and pseudo-first-order kinetics fitting model; XRD, SEM, nitrogen adsorption–desorption isotherms, FTIR spectrum, and XPS survey of the catalyst; TOC changes of 2,4-D; pseudo first-order kinetics fitting of the reaction; effects of PS and catalyst dosage; zeta potentials of 0.5-Mn3O4/C-T4; linear correlation results between pH and kobs; dynamic changes of solution pH with the low PS concentration; molecular structure of pollutants; degradation of 2,4-D by different carbon materials; cyclic voltammograms; optimized structures of models for DFT calculation; RDG isosurfaces of COH/PS; effects of MeOH and TBA on 2,4-D removal efficiency; decomposition of PS in the presence of NaN3; pore structure parameters of materials; and distance, bond length, and Bader charge in different structures (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04049/suppl_file/cs0c04049_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facilely-prepared sulfide-doped Co3O4 nanocomposite as a boosted catalyst for activating Oxone to degrade a sunscreen agent

Co3O4 nanocube-decorated nitrogen-doped carbon foam as an enhanced 3-dimensional hierarchical catalyst for activating Oxone to degrade sulfosalicylic acid

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Unveiling the Role of Cobalt Species in the Co/N-C Catalysts-Induced Peroxymonosulfate Activation Process.

Interface-engineered cavity-structured cobalt oxide as a boosted activator for peroxymonosulfate to degrade environmental hormones in water: Structural defects and oxygen vacancies-induced enhancement

Enhanced degradation of ultra-violet stabilizer Bis(4-hydroxy)benzophenone using oxone catalyzed by hexagonal nanoplate-assembled CoS 3-dimensional cluster

Catalytic Degradation of 2-Phenylbenzimidazole-5-sulfonic Acid by Peroxymonosulfate Activated with Nitrogen and Sulfur Co-Doped CNTs-COOH Loaded CuFe2O4

Chitosan derived N-doped carbon anchored Co3O4-doped MoS2 nanosheets as an efficient peroxymonosulfate activator for degradation of dyes

Modulating the coordination environment of Co single-atom catalysts through sulphur doping to efficiently enhance peroxymonosulfate activation for degradation of carbamazepine

Enhanced degradation of 5-sulfosalicylic acid using peroxymonosulfate activated by ordered porous silica-confined Co3O4 prepared via a solvent-free confined space strategy

3D hexagonal hierachitectured cobalt sulfide as an enhanced catalyst for activating monopersulfate to degrade sunscreen agent ensulizole

Origin of the Enhanced Reusability and Electron Transfer of the Carbon-Coated Mn 3 O 4 Nanocube for Persulfate Activation

Well-dispersed cobalt nanoparticles encapsulated on ZIF-8-derived N-doped porous carbon as an excellent peroxymonosulfate activator for sulfamethoxazole degradation

Promoting charge migration of Co(OH)2/g-C3N4 by hydroxylation for improved PMS activation: Catalyst design, DFT calculation and mechanism analysis

A novel Co-N-doped carbon catalyst to activate peroxymonosulfate for efficient removal of sulfamethazine: Role of singlet oxygen and high-valent cobalt-oxo species

In-situ synthesis of self-standing cobalt-doped nickel sulfide nanoarray as a recyclable and integrated catalyst for peroxymonosulfate activation

Efficient removal of organic pollutants by a Co/N/S-doped yolk-shell carbon catalyst via peroxymonosulfate activation

One-step synthesis of three-dimensional mesoporous Co3O4@Al2O3 nanocomposites with deep eutectic solvent: An efficient and stable peroxymonosulfate activator for organic pollutant degradations

Nitrogen, Sulfur and Oxygen Co-Doped Carbon-Armored Co/Co9S8 Rods (Co/co9s8@n-S-o-c) As Efficient Activator of Peroxymonosulfate for Sulfamethoxazole Degradation.

Peroxymonosulfate Activation by Fe-Co-O-Codoped Graphite Carbon Nitride for Degradation of Sulfamethoxazole

Co/N co-doped carbonized wood sponge with 3D porous framework for efficient peroxymonosulfate activation: Performance and internal mechanism