Abstract:Cobalt-doped alumina catalysts were prepared using different methods, either conventional wet impregnation (WI) and/or advanced spray impregnation (SI), and they were evaluated as novel oxidation catalysts for CO and MeOH oxidation. The spray impregnation technique was used with the aim of achieving the synthesis of core–shell catalytic nanostructures to secure the chemical/thermal stability of active sites on the catalyst carrier. The catalysts were further promoted with a low Pd content (0.5 wt.%) incorporated via either incipient wetness impregnation (DI) or spray impregnation. The results revealed the superior performance of the spray-impregnated catalysts (Co/γ-Al2O3-SI) for both reactions. The deposition of Co oxide on the outer surface of the alumina particle (SEM images) and the availability of the active Co phase resulted in the enhancement of the Co/γ-Al2O3 catalysts’ oxidation activity. Pd incorporation increased the catalysts’ reducibility (TPR-H2) and improved the catalysts’ performance for both reactions. However, the Pd incorporation method affected the catalytic performance; with the SI method, the active phase of Co3O4 was probably covered with PdO and was not available for the oxidation reactions. On the contrary, the incorporation of Pd with the DI method resulted in a better dispersion of PdO all over the Co/Al catalyst surface, maintaining available Co active sites and a better Pd-Co interaction. MeOH desorption studies revealed the methanol oxidation mechanism: the Co/Al catalysts promoted the partial oxidation of MeOH to formaldehyde (HCHO) and dehydration to dimethyl ether (DME), while the Pd-based Co/Al catalysts enhanced the complete oxidation of methanol to CO2 and H2O.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a new nanostructured Pd/Co - Al₂O₃ material in order to improve the efficiency of catalytically oxidizing air pollutants such as carbon monoxide (CO) and methanol (MeOH). Specifically, the research aims to enhance the catalytic activity and selectivity of these catalysts at low - temperature conditions by improving their redox properties and oxygen storage capacity. In addition, the research also explores the effects of different synthesis methods (traditional wet - impregnation (WI) and advanced spray - impregnation (SI)) on the structure and performance of the catalysts, and how the introduction of palladium (Pd) further enhances the activity of the cobalt - aluminum catalysts. ### Research Background and Problem Description 1. **Environmental and Energy Challenges** - With the increasing concern for environmental protection, reducing the emissions of CO and volatile organic compounds (VOC) in the transportation and industrial sectors has become a research hotspot. - Methanol, as an environmentally - friendly fuel, is considered a promising fuel to replace gasoline and diesel because of its low cost, high octane number, and good combustion characteristics. However, harmful partial oxidation products such as formaldehyde and unburned methanol vapor may be produced during the methanol combustion process. 2. **Limitations of Existing Catalysts** - Although noble - metal catalysts (such as Pd) exhibit high activity and selectivity in catalytic CO oxidation and deep methanol oxidation reactions, their high cost limits their wide application. - Transition - metal oxides (such as Co₃O₄) as catalysts show excellent performance in CO oxidation reactions, but since their morphology and structure depend on the synthesis method, they need to be further optimized to improve their catalytic performance. 3. **Research Objectives** - Develop a new nanostructured Pd/Co - Al₂O₃ catalyst and improve its catalytic activity for CO and methanol oxidation by improving its redox behavior and oxygen - storage capacity. - Explore the effects of different synthesis methods (wet - impregnation (WI) and spray - impregnation (SI)) on the structure and performance of the catalysts. - Study the effects of the introduction of Pd and its loading methods (wet - impregnation (DI) and spray - impregnation (SI)) on the performance of the catalysts. ### Main Research Contents - **Catalyst Preparation**: Co/γ - Al₂O₃ catalysts with different cobalt contents (1 wt.% and 5 wt.%) were prepared by using traditional wet - impregnation (WI) and spray - impregnation (SI) techniques, and 0.5 wt.% of Pd was further introduced by wet - impregnation or spray - impregnation. - **Catalyst Characterization**: The catalysts were structurally and morphologically characterized by means of ICP - AES, BET, XRD, SEM, etc. - **Catalytic Performance Evaluation**: The catalytic performance of the catalysts for CO and methanol oxidation reactions was evaluated in a fixed - bed reactor, and the test temperature ranges were 150 - 500°C and 30 - 300°C respectively. - **Mechanism Research**: The reducibility of the catalysts and the methanol adsorption - desorption behavior were studied by means of TPR - H₂, TPD - MeOH, etc., to reveal the catalytic reaction mechanism. ### Key Findings - The catalyst prepared by the spray - impregnation method (Co/γ - Al₂O₃ - SI) exhibits higher catalytic activity in CO and methanol oxidation reactions, which is attributed to its core - shell nanostructure and better Co dispersibility. - The introduction of Pd significantly improves the reducibility (TPR - H₂) of the catalyst and enhances its catalytic performance for CO and methanol oxidation, but the way of introducing Pd has an important impact on its performance. In particular, Pd introduced by spray - impregnation may cover the active sites of Co₃O₄, while Pd introduced by wet - impregnation is better dispersed on the entire catalyst surface, maintaining the active sites of Co. In conclusion, through optimizing the synthesis methods and composition of the catalysts, this research has successfully developed a high - performance Pd/Co - Al₂O₃ catalyst, providing a new solution for the efficient catalytic oxidation of air pollutants.

Novel Nanostructured Pd/Co-Alumina Materials for the Catalytic Oxidation of Atmospheric Pollutants

Pd-Co Based Spinel Oxides Derived from Pd Nanoparticles Immobilized on Layered Double Hydroxides for Toluene Combustion

Efficient CO Oxidative Coupling to Dimethyl Oxalate over the Pd/Al2O3 Nanocatalyst with the Assistance of Co Doping

Pd-Co Supported on Anodized Aluminium for VOCs Abatement: Reaction Mechanism, Kinetics and Applicability as Monolithic Catalyst

Bimetallic Pt-Co Nanoparticle Deposited on Alumina for Simultaneous CO and Toluene Oxidation in the Presence of Moisture

Highly Efficient Nano-octahedral Au/γ-Fe2O3 Catalyst Synthesized by Dealloying Combined with Calcination for Low-Temperature CO Oxidation

Catalytic oxidation of VOCs over 3D@2D Pd/CoMn2O4 nanosheets supported on hollow Al2O3 microspheres

Catalytic and electrocatalytic oxidation of ethanol over palladium-based nanoalloy catalysts

Transition Metal (fe2o3, Co3O4 and NiO)-Promoted CuO-Based Α-Mno2 Nanowire Catalysts for Low-Temperature CO Oxidation

Theoretically predicted innovative palladium stripe doping cobalt(111) surface with excellent catalytic performance for carbon monoxide oxidative coupling to dimethyl oxalate

Tailoring Pd/M@CoAlO Core-Shell Catalyst Morphology for Efficient Methane Oxidation

Rod-Like Nanoporous CeO2 Modified by PdO Nanoparticles for CO Oxidation and Methane Combustion with High Catalytic Activity and Water Resistance

Mesoporous Co‐Al Oxide Nanosheets As Highly Efficient Catalysts for CO Oxidation

A facial strategy to synthesize Pd/Co3O4 nanosheets with enhanced performance for methane catalytic oxidation

N-Doped Sub-3 Nm Co Nanoparticles As Highly Efficient and Durable Aerobic Oxidative Coupling Catalysts

Noble Metal Nanoparticles Incorporated Siliceous TUD-1 Mesoporous Nano-Catalyst for Low-Temperature Oxidation of Carbon Monoxide

Pt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3 Catalysts for CO Oxidation

The Enhancement of CO Oxidation Performance and Stability in SO2 and H2S Environment on Pd-Au/FeOX/Al2O3 Catalysts

Highly Active and Stable Palladium Catalysts on Novel Ceria–Alumina Supports for Efficient Oxidation of Carbon Monoxide and Hydrocarbons

Alumina Over-coating on Pd Nanoparticle Catalysts by Atomic Layer Deposition: Enhanced Stability and Reactivity

Dispersed Pd/alumina catalyst with finite iodine entry for boosted CO purification and dimethyl carbonate synthesis