Abstract:GHz pulsed thulium-doped fiber laser with stabilized repetition rate can enable a wide range of applications. By employing regenerative mode-locking and cavity stabilization technique, we have for the first time demonstrated a 10 GHz polarization-maintaining thulium-doped fiber laser, which has a long-term repetition-rate stabilization and picosecond timing-jitter. In our experiment, a RF circuitry is designed to extract the 10 GHz longitudinal clock signal so that stable regenerative mode-locking is achieved. A piezo actuator-based phase-lock-loop is used to lock the regeneratively mode-locked pulses to a local reference synthesizer. The regeneratively mode-locked pulses with picosecond pulse width exhibit a high super-mode suppression ratio of 60 dB. In addition, the repetition rate of the laser shows good long-term stability with a variation of 8 Hz in 8 hours, corresponding to a cavity free spectral range fluctuation of less than 16 mHz. Meanwhile, the Allan deviation of the stabilized 10 GHz regeneratively mode-locked pulses is measured to be as low as 2 x 10(-12) over 1000 s average time, which is only limited by the stability of the reference synthesizer. Such an ultra-stable 10 GHz pulsed thulium fiber laser may find potential application in 2 mu m optical communication, material processing and spectroscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Environmentally stable all‐fiber femtosecond laser for industrial application based on a SESAM mode‐locked ytterbium‐doped laser

Environmentally-stable 50-Fs Pulse Generation Directly from an Er:fiber Oscillator

Environmentally stable all-normal-dispersion femtosecond fiber laser

Generation Of Ultra-Stable 50-Fs Pulses Directly From An Er-Doped Fiber Oscillator

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Environment-stable sub-100 fs Er: fiber laser with a 3 dB bandwidth of 78 nm

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

27nJ, 114fs Pulses From an Environmentally Stable All-Normal All-PM Yb-Doped Fiber Laser Mode-Locked With a Nonlinear Amplifying Loop Mirror

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

Stable Multi-Wavelength Erbium-Doped Fiber Laser by Using Dispersion-Shifted Fiber

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

Environmentally stable Er-fiber mode-locked pulse generation and amplification by spectrally filtered and phase-biased nonlinear amplifying long-loop mirror

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Experimental study on stable 10-GHz actively mode-locked fiber ring laser

Self-Starting And Environment Stable 500 Mhz Repetition Rate Femtosecond Yb: Fiber Laser With Non-Polarization Maintaining Fiber

SESAM mode-locked all-polarization-maintaining fiber linear cavity ytterbium laser source with spectral filter as pulse shaper

10 GHz Regeneratively Mode-Locked Thulium Fiber Laser with a Stabilized Repetition Rate

Tunable picosecond SESAM mode-locking ytterbium-doped double-clad LMA PCF oscillator

Sub-Femtosecond Timing Jitter from a SESAM Mode-Locked Yb-Fiber Laser

Low-repetition-rate, all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

Sub-50 fs diode-pumped SESAM mode-locked Yb:SrF2 laser