Abstract:With the growing demand for electric vehicles, the safety of lithium-ion batteries has been greatly emphasized. Thermal runaway caused by the continuous side reactions inside the battery makes it difficult to extinguish fires caused by abnormal activity. The temperature at which a typical thermal runaway begins is around 100°C, the temperature at which several elements in the solid electrolyte interphase (SEI) layer on the anode surface experience thermal decomposition reactions (causing gas generation and heat production). Therefore, to understand the first stage of thermal runaway and increase battery safety, it is necessary to describe the thermal decomposition process of the SEI layer. To investigate the thermal decomposition process of the SEI layer, it is necessary to understand the various organic components. During the initial charging phase, the reduction reaction between the lithium ions and the electrolyte produces a series of components that make up the SEI layer. On the surface of the anode active material, the SEI layer is a thin layer with an overall thickness of 10-50 nm. It is composed of various organic (inner layer) and inorganic (outer layer) elements. Under thermal stress, the unstable organic SEI layer decomposes into an inorganic SEI layer due to its low stability in the presence of heat and gas generation, which is mostly caused by the decomposition of lithium carbonate (ROCOOLi). It is important to note that the most used electrolytes in batteries today are ethylene carbonate and ethyl methyl carbonate (EMC) dissolved in salts based on lithium hexafluorophosphate. Due to the application of EMC, lithium methyl carbonate (LMC) accounts for more than 50% of the SEI layer in the ROCOOLi compounds. This study used both theoretical and experimental techniques to fully elucidate the pyrolysis process of high-purity synthesized LMC with the electrolyte. First, LMC was chemically synthesized using a nucleophilic substitution reaction. Then, in-situ thermogravimetry analysis (TGA)-mass spectrometer(MS), attenuated total reflectance (ATR)- fourier transform infrared (FTIR), and nuclear magnetic resonance (NMR) results along with bond dissociation energy (BDE)/spectral analysis/energy diagrams obtained by density functional theory (DFT) calculations were analyzed to propose the elementary reaction steps involved in the pyrolysis reaction. We propose six elementary reaction steps for the pyrolysis reaction of LMC. To verify the validity of the proposed basic reaction mechanisms, chain reactions involving radicals generated during pyrolysis were finally calculated using GRI-MECH 3.0, and the calculated results were compared with the composition of the actual gas. We hope to utilize the techniques used in this study to obtain the reaction steps of additional SEI components (LEMC, Li 2 CO 3 , etc.). The precise mechanisms obtained through modeling studies can be used to predict the self-heating phase of thermal runaway and to develop materials that can stop the SEI decomposition reaction.

Investigation of chemical kinetic models for electrolyte solvent vapors released from thermal runaway lithium-ion batteries

A 3D simulation model of thermal runaway in Li-ion batteries coupled particles ejection and jet flow

A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery

Accelerated Computational Strategies for Multi-Scale Thermal Runaway Prediction Models in Li-ion Battery

Pyrolysis-based modelling of 18650-type lithium-ion battery fires in thermal runaway with LCO, LFP and NMC cathodes

Experimental and modeling study on ignition kinetics of ethyl methyl carbonate

Experimental and chemical kinetic modeling study of ethylene carbonate oxidation: A lithium-ion battery electrolyte surrogate model

Decomposition Mechanism of Lithium Methyl Carbonate with Electrolyte in the Solid Electrolyte Interphase to Elucidate the Early Stages of Thermal Runaway in Lithium-Ion Batteries

Development and Validation of a Reduced Chemical Kinetic Mechanism of Dimethyl Carbonate and Ethylene Carbonate

Study on the Flammability Limits of Lithium-Ion Battery Vent Gas under Different Initial Conditions

Numerical Study on Lithium-Ion Battery Thermal Runaway Under Fire Conditions

Quantum Chemical Calculation Study on the Thermal Decomposition of Electrolyte During Lithium-Ion Battery Thermal Runaway

Experimental and kinetic study on the stabilities and gas generation of typical electrolyte solvent components under oxygen-lean oxidation and pyrolysis conditions

Experimental Study on the Combustion Characteristics of Carbonate Solvents under Different Thermal Radiation by Cone Calorimeter

A Novel Framework for Consequence Prediction of Battery Thermal Runaway Failure Hazards

Thermal runaway modeling of large format high-nickel/silicon-graphite lithium-ion batteries based on reaction sequence and kinetics

Development and application of a semi-detailed model for lithium-Ion battery thermal runaway chemistry

Model-based Thermal Runaway Prediction of Lithium-Ion Batteries from Kinetics Analysis of Cell Components

Extending a Multi-Physics Li-Ion Battery Model from Normal Operation to Short Circuit and Venting

Computational modelling and statistical evaluation of thermal runaway safety regime response on lithium-ion battery with different cathodic chemistry and varying ambient condition

Energy stability prediction strategy for polymer electrolyte lithium batteries based upon an improved kinetic programming algorithm