Abstract:Insight of thermal behaviour of lithium-ion batteries under various operating conditions is crucial for the development of battery management system (BMS). Although battery thermal behaviour has been studied by published models, the reported modelling normally addresses either normal operation or thermal runaway condition. A comprehensive electro-thermal model which can capture heat generation, voltage and current variation during the whole process from normal cycling to thermal runaway should be of benefit for BMS by evaluating critical factors influencing potential transition to thermal runaway and investigating the evolution process under different cooling and environment conditions. In this study, such a three-dimensional model has been developed within the frame of open source computational fluid dynamics (CFD) code OpenFOAM to study the electrical and thermal behaviour of lithium-ion batteries (LIBs). The equations governing the electric conduction are coupled with heat transfer and energy balance within the cell. Published and new laboratory data for LiNi0.33Co0.33Mn0.33O2/Li1.33T1.67O4 (LNCMO/LTO) cells from normal cycling to thermal runaway have been used to provide input parameters as well as model validation. The model has well captured the evolution process of a cell from normal cycling to abnormal behaviour until thermal runaway and achieved reasonably good agreement with the measurements. The validated model has then been used to conduct parametric studies of this particular type of LIB by evaluating the effects of discharging current rates, airflow quantities, ambient temperatures and thickness of airflow channel on the response of the cell. Faster function losses, earlier thermal runaway and higher extreme temperatures were found when cells were discharged under higher current rates. The airflow with specific velocity was found to provide effective mitigation against over-heating when the ambient temperature was below 370 K but less effective when the ambient temperature was higher than the critical value of 425 K. The thickness of airflow channel was also found to have critical influence on the cell tolerance to elevated temperatures. These parametric studies demonstrate that the model can be used to predict potential LIB transition to thermal runaway under various conditions and aid BMS.

Pyrolysis-based modelling of 18650-type lithium-ion battery fires in thermal runaway with LCO, LFP and NMC cathodes

A 3D simulation model of thermal runaway in Li-ion batteries coupled particles ejection and jet flow

A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery

Investigation of chemical kinetic models for electrolyte solvent vapors released from thermal runaway lithium-ion batteries

Numerical Simulations on Non-Reactive Multiphase Flow During the Transition from Vent Activation to Venting with Vent Cap Fragments in 18650 Lithium-Ion Batteries

Thermal runaway modeling of large format high-nickel/silicon-graphite lithium-ion batteries based on reaction sequence and kinetics

Development and application of a semi-detailed model for lithium-Ion battery thermal runaway chemistry

Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway

Numerical Study on Lithium-Ion Battery Thermal Runaway Under Fire Conditions

Extending a Multi-Physics Li-Ion Battery Model from Normal Operation to Short Circuit and Venting

A Multiphysics Model Simulating the Electrochemical, Thermal, and Thermal Runaway Behaviors of Lithium Polymer Battery

A Simplified Mathematical Modeling Approach for Thermal Runaway of Li(Ni0.8Co0.1Mn0.1)O2 Pouch Cells Based on Thermal Runaway Experimental Data

Numerical modeling on thermal runaway triggered by local overheating for lithium iron phosphate battery

Investigation on the thermal hazards of 18650 lithium ion batteries by fire calorimeter

A new exploration of the fire behaviors of large format lithium ion battery

Full-Dimensional Analysis of Gaseous Products to Unlocking In Depth Thermal Runaway Mechanism of Li-Ion Batteries

Computational modelling and statistical evaluation of thermal runaway safety regime response on lithium-ion battery with different cathodic chemistry and varying ambient condition

Unlocking the self-supported thermal runaway of high-energy lithium-ion batteries

Thermal runaway and fire behavior investigation of lithium ion batteries using modified cone calorimeter

Modelling Electro-Thermal Response of Lithium-Ion Batteries from Normal to Abuse Conditions

Modeling and Simulation of a Gas-Exhaust Design for Battery Thermal Runaway Propagation in a LiFePO4 Module