Abstract:Centrifugal force is one of the factors that cannot be ignored in high-speed shaft systems. The multiple corrugated diaphragm (MCD) Coupling is suitable for high-power and high-speed situations; hence, it is crucial to investigate the stress and deformation of the wave disc under centrifugal load. This paper first uses the rotating shell thin film model to derive the circumferential stress and deformation displacement of the MCD under centrifugal load. Then, the finite element method is used to verify the results obtained from the analytical solution. The results show the feasibility of using the rotating shell thin film model for centrifugal load analysis of the MCD, providing a new approach for the theoretical analysis of the MCD.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the stress and deformation analysis of the Multiple Corrugated Diaphragm (MCD) under centrifugal load in high - speed shaft systems. Specifically, the paper derives the circumferential stress and deformation displacement of MCD under centrifugal load through the thin - shell model of rotating shells, and uses the finite element method to verify the accuracy of these analytical solutions. This research provides a new method for the theoretical analysis of MCD couplings, which is conducive to its application and development under high - power and high - speed working conditions. ### Background and Problem - **Background**: Centrifugal force is one of the factors that cannot be ignored in high - speed shaft systems. The Multiple Corrugated Diaphragm (MCD) is suitable for high - power and high - speed situations, so it is crucial to study its stress and deformation under centrifugal load. - **Problem**: Existing research is mainly based on experimental tests or the finite element method, and there are few theoretical derivations for MCD. The approximate solutions obtained by the finite element method cannot deeply analyze this special waveform structure. Therefore, theoretical research is required to promote the application and development of MCD couplings. ### Research Methods 1. **Thin - shell model of rotating shells**: The paper first uses the thin - shell model of rotating shells to derive the circumferential stress and deformation displacement of MCD under centrifugal load. 2. **Verification by finite element method**: Then, the finite element method is used to verify the results of the analytical solutions. ### Main Results - **Stress analysis**: The overall trends of the circumferential stress curves obtained by the analytical method and the finite element method are consistent, but the results of the finite element method fluctuate, with a maximum difference of 19%. - **Deformation displacement analysis**: The overall trends of the horizontal and vertical displacements are also consistent, but the results of the finite element method also fluctuate. The maximum difference in horizontal displacement is 19%, and the maximum difference in vertical displacement is 37%. ### Conclusion Although there are certain differences between the results of the analytical method and the finite element method, it is feasible to introduce the thin - shell model of rotating shells for the theoretical analysis of MCD, which provides a new method for the theoretical analysis of MCD couplings. Future research will further optimize the model and reduce the error between the two methods, thereby promoting the development and application of MCD couplings.

Stress analysis under centrifugal load of the multiple corrugated diaphragm coupling based on rotating shell thin film model

Analytical and experimental study on the axial stiffness of multiple corrugated diaphragm coupling based on the corrugated circular plate theory

Fatigue Life Calculation Method and Experimental Study of the Multiple Corrugated Diaphragm Coupling

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Contact Stress Analysis of Curvic Coupling of Circumferential Tie Rotor

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

The Coupled Vibration of a Spinning Flexible Annular Circular Disk with Air Film

Strength Analysis on High Speed Shaft Coupling

A Unified Modeling Approach for Rotating Flexible Shaft-Disk Systems with General Boundary and Coupling Conditions

Study on the Effect of Cracks in Diaphragm Couplings on the Dynamic Characteristics of Shaft System

Nonlinear analysis of a dual-disk rotor system considering elastoplastic contact

Static and Dynamic Stress of the Combined Rotor with Curvic Couplings Considering the Rough Three-Dimensional Interface at Extreme Operating Conditions

Dynamical Analysis On Circumferential Rod Fastening Rotor System In Heavy-Duty Gas Turbine

The Analysis of the Flexible Load Sharing Structure of the Ring Gear in Planetary Transmission

Analysis on Modeling Rotor System with Sidling Bearing and Ring Seal by Using FEM

Coupling modeling and analysis of a wind energy converter

Incremental Deformation Analysis of Shell and Corrugated Diaphragm Based on Arbitrary Configuration

Deformation and stress analysis of short flexspline in the harmonic drive system with load

Coupling vibration characteristics of the shaft-disk-drum rotor system with bolted joints

Dynamic Characteristics of Rub-Impact on Rotor System with Cylindrical Shell

Damage Mechanism Analysis of the Connecting Screw of Turbine Disk-Drum Assembly