Abstract:Measuring the straightness of the scraper conveyor, which is an indispensable piece of equipment in a fully mechanized coal face, can prevent accidents such as derailment of the shearer and is also important for the precise positioning of the shearer and the accurate control of the hydraulic support. The existing scraper conveyor straightness measurement methods have the disadvantages of inconsistent measurement cost, accuracy, and reliability as well as low dimension of straightness description. To this end, this paper proposes a method for monitoring the three-dimensional straightness of a scraper conveyor based on binocular vision. Trapezoidal window matching technology was used to realize the image acquisition of multiple stations and multiple sensors. The bit pose acquisition model of binocular vision 3D reconstruction was used to obtain the 3D coordinates of the feature points on the sign board in each local coordinate system and the bit pose information of each sign board. The pose relay videometric method was used to convert the straightness in each local coordinate system to the global coordinate system to realize the 3D reconstruction of the scraper conveyor. Finally, the straightness measurement test of the preset scraper conveyor was carried out, and the error analysis was carried out by comparing with the manual measurement results, which showed that the measurement errors were all within ±30 mm. At the same time, the standard deviation of errors in both directions was small, which indicates that the straightness measurement method for the scraper conveyor in this paper has high reliability. In addition, the visual measurement process is independent of each other, so there is no error accumulation in the visual straightness measurement method. The analysis shows that the method of measuring the straightness of a scraper conveyor based on binocular vision can realize continuous and real-time monitoring of the scraper conveyor.

Online deviation measurement system of the strip in the finishing process based on machine vision

Vision-Based Position Deviation Measurement of Rail Corrugation Chord Measuring Points under Bi-Linear Laser Assistance

Automatic Calibration System for Digital-Display Vibrometers Based on Machine Vision

MULTI-CHANNEL WIDTH MEASURING INSTRUMENT WITH CCD FOR COLD ROLLED SHEETS

The on- line bearing inspection system based on machine vision

Online measurement system of slab front-end bending in hot rough rolling based on line structured light vision

An On-Line Measurement Method of the Medium Thickness Steel Plate Based on Structured Light Vision Sensor

A Computer Vision Based Conveyor Deviation Detection System

Development of electrical runout online measurement system based on eddy current technique and laser triangulation

A line scanning monitoring method for conveyor belt deviation using point cloud

A Structured Light Vision Sensor for Online Measurement of Steel-Plate Width

Research on a Real-Time Monitoring Method for the Three-Dimensional Straightness of a Scraper Conveyor Based on Binocular Vision

Machine vision based roundness and cylindricity detection of bearing rollers

Online measurement method for dimensions of disk parts based on machine vision

Machine Vision-Based Segmentation and Classification Method for Intelligent Roller Surface Monitoring

Deviation rectification for dynamic measurement of rail wear based on coordinate sets projection

Study on the on-line measurement system for the section dimensions of hot-rolled shaped steel

Realization of calibration control algorithm for curved surface-oriented machine vision

Research on Misalignment Detection of Paper Machine Clothing Based on Computer Vision

Integrated real-time measurement method of filament lamp dimension based on machine vision

A method combining laser and vision detection for on-line measurement of small modules gears