Abstract:The critical cooling rate (Rc) calculated on the basis of the time-temperature-transformation (TTT) curve was taken as the intrinsic criteria of reflecting the glass forming ability (GFA) for the amorphous alloy. The TTT curves were plotted based on the isothermal Wheeler-Boettinger-McFadden (WBM) phase field method (PFM). By analyzing the TTT curves, the influence of different activation energy parameters E and Q for the interface mobility M and nucleation rate P respectively on Rc and GFA were investigated for Fe-25%B (mole fraction) binary amorphous alloy in present paper. The results showed that the activation energy E for the interface mobility M had litter influence on the nose temperature and time for the TTT curves. Under the different thermal activation energy Q1, Q2 and Q3 for the nucleation rate P, the temperatures and times corresponding to the nose tip were 500K, 600K, 775K and 6.2×10−4s, 4.5×10−4s, 9.5×10−4s, respectively, and the calculated values of Rc were 1.57×106K/s, 1.93×106K/s, 7.35×105K/s, respectively, which were in the range of 6.4×105 ~ 6.8×106K/s from the experimental measurements. Under the influence of thermal activation energy Q, the nose tip temperature increased, which meant Q controlled the nose tip temperature, while the higher Q would not get the perfect C shape. It was found that the values of Rc calculated based on the TTT curves by the PFM were in good agreement with the reported experimental values, which verified the feasibility of the glass prediction and the research of the intrinsic physical mechanism of the GFA by the PFM.

An empirical criterion for predicting the glass-forming ability of amorphous alloys based on electrical transport properties

On the New Criterion to Assess the Glass-Forming Ability of Metallic Alloys

A New Criterion for Predicting the Glass-Forming Ability of Bulk Metallic Glasses

Glass-forming ability determined from inter-atomic potentials for some miscible/immiscible binary metal systems

Proposed correlation of glass formation ability with critical dosage for the amorphous alloys formed by ion beam mixing

A new criterion for evaluating the glass-forming ability of bulk metallic glasses

Predictability of bulk metallic glass forming ability using the criteria based on characteristic temperatures of alloys

Predicted Optimum Composition for the Glass-Forming Ability of Bulk Amorphous Alloys: Application to Cu-Zr-Al

Prediction of good glass forming ability in amorphous soft magnetic alloys by thermocalc simulation with experimental validation

Glass Forming Ability of Metallic Glasses Evaluated by a New Criterion

Correlation between the Arrhenius crossover and the glass forming ability in metallic glasses

The Relations Between ΔT and the Glass Forming Ability of Bulk Amorphous Zr–Cu–Ni–Al–Hf–Ti and Zr52.5Cu17.9Ni14.6Al10Ti5 Alloys

Prediction of the Glass Forming Ability in a Fe-25%B Binary Amorphous Alloy Based on Phase-Field Method

Understanding Glass-Forming Ability Through Sluggish Crystallization of Atomically Thin Metallic Glassy Films

The anharmonicity role of interatomic potential in predicting glass formation

Matching Glass-Forming Ability with the Density of the Amorphous Phase.

Chemical short-range order domain in bulk amorphous alloy and the prediction of glass forming ability

Prediction of glass-forming ability of metallic liquids

Strategy for Pinpointing the Best Glass-Forming Alloys

Research Status and Trends of Glass Forming Ability of Bulk Amorphous Alloys

Glass formation in binary alloys with different atomic symmetries