Abstract:Recently, perovskite-based light-emitting diodes based on organometal halide emitters have attracted much attention because of their excellent properties of high color purity, tunable emission wavelength and a low-temperature processing technique. As is well-known, organic light-emitting diodes have shown powerful capabilities in this field; however, the fabrication of these devices typically relies on high-temperature and high-vacuum processes, which increases the final cost of the product and renders them uneconomical for use in large-area displays. Organic/inorganic hybrid halide perovskites match with these material requirements, as it is possible to prepare such materials with high crystallinity through solution processing at low temperature. Herein, we demonstrated a high-brightness green light-emitting diode based on Pedot: PSS/CH3NH3PbBr3/ZnO sandwich structures by a spin-coating method combined with a sputtering system. Under forward bias, a dominant emission peak at ∼530 nm with a low full width of half-maximum (FWHM) of 30 nm can be achieved at room temperature. Owing to the high surface coverage of the CH3NH3PbBr3 layer and a device design based on carrier injection and a confinement configuration, the proposed diode exhibits good electroluminescence performance, with an external quantum efficiency of 0.0645%. More importantly, we investigated the working stability of the studied diode under continuous operation to verify the sensitivity of the electroluminescence performance to ambient atmosphere and to assess the suitability of the diode for practical applications. Moreover, the underlying reasons for the undesirable emission decay are tentatively discussed. This demonstration of an effective green electroluminescence based on CH3NH3PbBr3 provides valuable information for the design and development of perovskites as efficient emitters, thus facilitating their use in existing applications and suggesting new potential applications.

All-inorganic green light-emitting diode based on p-NiO/CsPbBr 3 /n-GaN heterojunction structure

High-performance planar green light-emitting diodes based on a PEDOT:PSS/CH3NH3PbBr3/ZnO sandwich structure

Enhanced ultraviolet electroluminescence performance from p-NiO/n-GaN heterojunctions by using i-Ga2O3 as electron blocking layer

Near-white light-emitting diode from p-CuO/n-GaN heterojunction with an i-CuO electron blocking layer

Fabrication of tunable n-Zn1-xCdxO/p-GaN heterojunction light-emitting diodes

Pure ultraviolet light-emitting diode based on the p-NiO/i-NiO/n-GaN structure by magnetron sputtering

Mixed-dimensional CsPbBr3@ZnO heterostructures for high-performance p-n diodes and photodetectors

Mixed-dimensional CsPbBr<sub>3</sub>@ZnO heterostructures for high-performance p-n diodes and photodetectors

N-Zno/i-mgo/p-gan Heterojunction Light-emitting Diodes

Excellent electroluminescence and electrical characteristics from p-CuO/i-Ga2O3/n-GaN light-emitting diode prepared by magnetron sputtering

Vacuum-deposited perovskite CsPbBr3 thin-films for temperature-stable Si based pure-green all-inorganic light-emitting diodes

Fabrication and Emission Properties of a N-Zno/p-gan Heterojunction Light-Emitting Diode

High-efficiency perovskite nanocrystal light-emitting diodes<i>via</i>decorating NiO<sub><i>x</i></sub>on the nanocrystal surface

Electroluminescence from a n-ZnO nanorod/p-CuAlO2 heterojunction light-emitting diode

CsPb(Br/I) 3 Perovskite Nanocrystals for Hybrid GaN-Based High-Bandwidth White Light-Emitting Diodes

High Efficiency N-Zno/p-sic Heterostructure Photodiodes Grown by Plasma-Assisted Molecular-Beam Epitaxy

Ultra-bright pure green perovskite light-emitting diodes

High-Efficiency Perovskite Nanocrystal Light-Emitting Diodesviadecorating Nio(X)On The Nanocrystal Surface

High-efficiency color tunable n-CdSxSe1-x/p +-Si parallel-nanobelts heterojunction light-emitting diodes

Pseudohalogen Resurfaced CsPbBr 3 Nanocrystals for Bright, Efficient, and Stable Green-Light-Emitting Diodes