Abstract:This research has demonstrated that SiO 2 impregnation under high vacuum pressure of − 90 kPa can significantly reduce porosity by almost 10%, and improve the mechanical and viscoelastic properties of spruce wood under dry and saturated states. Characterization methods, such as impact test, DMA, SEM, EDS, porosity and SAXS tests were conducted on non-treated and − 90 kPa treated spruce wood samples under dry, saturated and submerged states to analyze the synergistic effect of high vacuum SiO 2 impregnation pressure on wood properties. The results showed that high vacuum impregnation pressure had a significant positive reinforcing effect on wood's properties. It increased the impact resistance of wood under dry and saturated conditions. Additionally, the high vacuum impregnation technique was able to overcome the water-induced softening effect and caused a significant increase in the storage modulus through uniform dispersion of the SiO 2 particles in the wood's vascular structure. Consequently, the impregnation reinforced the wood and ameliorated its capacity to absorb energy. High vacuum impregnation was also able to counteract the plasticizing effect of the water molecules and significantly increased the loss modulus by increasing the internal friction and cohesion of the wood components with the addition of the nanoparticles to the vascular system, which increased the wood's capacity to transform and dissipate energy. Quantitatively and qualitatively, impregnation under a vacuum pressure of − 90 kPa exhibited an effective obstruction of the vascular structure of spruce wood. In all conditions, high vacuum-impregnated samples showed significant enhancements over non-treated samples. This research demonstrated that high vacuum SiO 2 impregnation is an effective wood processing technique. Multiple materials and applications could benefit from this research wherein high strain-rate deformations are expected to occur or when simultaneous elastic behaviour of wood and its damping energy is needed. This study could also pave the way for research on the synergistic effect of SiO 2 impregnation and water absorption on the viscoelastic behaviour of wood.

Effect of microwave-assisted impregnation on the leaching resistance of ACQ in refractory spruce wood

Effects of different incising pretreatments in improving permeability in two refractory wood species

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

Decay resistance and mechanical strength of poplar wood treated after injection treatment to living trees using ammoniacal copper quaternary/carbon dots

The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions

Effect of microwave treatment on the wood structure of Norway spruce and radiata pine

Penetration and Effectiveness of Micronized Copper in Refractory Wood Species

Effect of microwave pre-treatment on preservative retention and treatability of Melia composita wood

Improving Disintegration and Acidification of Waste Activated Sludge by Combined Alkaline and Microwave Pretreatment

Treatment of Blast Furnace Gas Washing Water by Utilization of Coagulation Associated with Microwave

Effect of microwaves combined with peracetic acid to improve the dewatering performance of residual sludge

Analyses of Impregnation Quality and Mechanical Properties of Radiata Pine Wood Treated with Copper Nanoparticle- and Micronized-Copper-Based Wood Preservatives

Improving gas permeability and characterizing the multi-scale pore size distribution of radiata pine (Pinus radiata D. Don) treated via high-intensity microwave

Mineralization of heat-treated fir wood with magnesium oxychloride: study of physical and structural properties

Surface Treatment of Mongolian Scots Pine Using Phosphate Precipitation for Better Performance of Compressive Strength and Fire Resistance

Characterization of antibiotic mycelial residue (AMR) dewatering performance with microwave treatment.

Effect of Modification with ACQ-D on Mechanical and Sorption Isotherm Performance of Fast-Growing Poplar Wood

A new wood-modification process based on in situ grafting of urethane groups: biological resistance and dimensional stability of carbamylated Scots pine wood

Effect of oil impregnation on water repellency, dimensional stability and mold susceptibility of thermally modified European aspen and downy birch wood

Effects of Microwave Treatment and Grafting on Structure and Mechanical Properties of PVC/Wood-flour Composites

PREPARATION OF HIGH WATER-ABSORBENT RESIN WITH CELLULOSE UNDER MICROWAVE RADIATION AND ITS PERFORMANCES