Abstract:Chemical modification of wood mainly aims at improving dimensional stability, resistance to biodeterioration and surface degradation. In some cases, it is specifically targeted at adapting or improving mechanical performance. However, a general understanding of the effects of chemical modification on the mechanical properties of wood, which would facilitate more efficient modification strategies, is missing. Here, a combined experimental and simulation study is provided to gain a more general understanding of the mechanical behaviour of chemically modified wood. In the first part of this study, the mechanical properties of chemically modified Norway spruce are studied experimentally. In Mora Mendez et al. (Wood Sci Technol <a href="#CR31">2019</a>), simulations of different types of chemical modifications will be presented using a multi-scale model and the outcome will be compared with the obtained experimental data. Chemical modification was based on a two-step modification process. The first step involved methacrylation of the OH-groups in the cell wall. In the second step, in situ polymerization of styrene was induced in the methacrylated samples, which resulted in a partial cell wall and lumen filling. Tensile stiffness and rolling shear stiffness were analysed for methacrylated and polymerized samples. Whereas only small changes in mechanical properties were found for methacrylated samples, the polymerization process led to pronounced increases in elastic modulus and shear stiffness because of weight percent gains of 60–95%. Yet, the specific stiffness was lowered, as the density increase was disproportionate to the stiffness increase. Moreover, a pronounced improvement in rolling shear modulus (GRT) by a factor of 4.5 was obtained for the in situ polymerized specimen.

A new wood-modification process based on in situ grafting of urethane groups: biological resistance and dimensional stability of carbamylated Scots pine wood

Phosphorylated and carbamylated Kraft lignin for improving fire- and biological-resistance of Scots pine wood

High Leach-Resistant Fire-Retardant Modified Pine Wood (Pinus sylvestris L.) by In Situ Phosphorylation and Carbamylation

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Tensile and Impact Bending Properties of Chemically Modified Scots Pine

Modification of Scots Pine with Activated Glucose and Citric Acid: Physical and Mechanical Properties

Small Angle Neutron Scattering Reveals Wood Nanostructural Features in Decay Resistant Chemically Modified Wood

Wood modification with N-methylol and N-methyl compounds: a case study on how non-fixated chemicals in modified wood may affect the classification of their durability

Mechanical behaviour of chemically modified Norway spruce (Picea abies L. Karst.): Experimental mechanical studies on spruce wood after methacrylation and in situ polymerization of styrene

Manufacturing and Characterization of Modified Wood with In Situ Polymerization and Cross-linking of Water-Soluble Monomers on Wood Cell Walls

Modification Mechanisms and Properties of Poplar Wood via Grafting with 2-Hydroxyethyl Methacrylate/N,N'-methylenebis(acrylamide) onto Cell Walls

Resistance against fungal decay of Scots pine sapwood modified with phenol-formaldehyde resins with substitution of phenol by lignin pyrolysis products

Thermo-oxidative Decomposition and Combustion Behavior of Scots Pine (pinus Sylvestris L.) Sapwood Modified with Phenol- and Melamine-Formaldehyde Resins

Eco-friendly and Mildly Modification of Wood Cell Walls with Heat Treated Wood Extracts to Improve Wood Decay Resistance

Effect of alkali treatment and fungal degradation on the nanostructure and cellulose arrangement in Scots pine cell walls – A neutron and X-ray scattering study

Introduction of Aldehyde Groups into Surface of Pine Bark Via Cannizzaro Reaction to Improve Urea-formaldehyde Resin Properties

The Accessibility of the Cell Wall in Scots Pine ( Pinus sylvestris L.) Sapwood to Colloidal Fe 3 O 4 Nanoparticles

Effects of Chemical Modification on the Mechanical Properties of Wood

MODIFICATION OF RADIATA PINE WOOD WITH LOW MOLECULAR WEIGHT MODIFYING AGENTS AND LARGE MOLECULAR WEIGHT STYRENE/ACRYLIC ACID COPOLYMER DISPERSION

Modification of wood cell wall with water-soluble vinyl monomer to improve dimensional stability and its mechanism