Abstract:Lithium (Li) metal batteries are strongly considered one of the most promising candidates for next-generation rechargeable batteries due to their high theoretical specific capacity and low reduction potential. However, Li metal anodes are suffering from limited cycle life, low cycling efficiency, and severe safety concerns resulting from sharp Li dendrites and electrolyte degradation. The uncontrollable Li dendrite growth caused by the uneven distribution of Li ions is an extremely complicated issue coupled with the transport of anions, cations and electrons, as well as the chemical and electrochemical reactions at the anode-electrolyte interphase. In terms of the ion migration, space-charge theory indicates that the electrolyte is divided into a quasi-neutral region and a space-charge region. The quasi-neutral region approaches the cathode side, at which the ion transfer is governed by diffusion. In contrast, when ions travel close to the anode side, the ion transport is mainly driven by the electric field, leaving a space-charge region that accounts for ramified Li metal growth. Consequently, it is rewarding to design electrolytes that can regulate the ion distribution (including both Li cations and the counter anions) to inhibit Li dendrite growths. Immobilizing anion has been theoretically proved to influence cation distribution, where a portion of immobilized anions (even as small as 10%) contribute to stable Li electrodeposition. Here, we develop an anion-immobilized solid-state composite electrolyte for Li metal anodes. Garnet-type Li6.75La3Zr1.75Ta0.25O12 (LLZTO) ceramic particles are well dispersed in a polymer matrix to synthesize a polyethylene oxide (PEO)–lithium bis(trifluoromethylsulphonyl)imide (LiTFSI)–LLZTO (PLL) solid electrolyte. In contrast to routine electrolytes with mobile anions, the PLL solid electrolyte contributes to effective immobilization of anions for uniform ion distribution and dendrite-free Li deposition. Chemical and mechanical interactions between ceramic particles and the polymer matrix result in reduced PEO crystallinity and pinned TFSI−anions, enabling relatively fast Li+conduction. We further demonstrate the application of this flexible membrane in all–solid-state LiFePO4 (LFP) || Li and LiNi0.5Co0.2Mn0.3O2(NCM) || Li batteries. Moreover, ion migration in batteries can be analogized to the fluid transportation in packed towers in the field of chemical industry. Redistributors are used to intensify the heat and mass transfer processes in a packed tower. Solid-state electrolyte LLZTO, with abundant 3D ion conduction channels, can act as a redistributor to regulate Li-ion distribution. We propose a concept of ion redistributors to eliminate dendrites by redistributing Li ions with LLZTO coated polypropylene (PP) separators in Li metal batteries. The standard deviation of ion concentration beneath the LLZTO composite separator is 13 times less than that beneath the routine PP separator. This approach enables a high specific capacityfor LiFePO4|| Li pouch cells and prolonged cycle life span of 800 hours for Li || Li pouch cells. This strategy is facile and efficient in regulating Li-ion deposition by separator modifications and is a universal method to protect alkali metal anodes in rechargeable batteries. References [1] C. Z. Zhao, X. Q. Zhang, X. B Cheng et al. Proc. Natl. Acad. Sci. U.S.A. 2017, 114, 11069. [2] C. Z. Zhao, P. Y. Chen, R. Zhang et al. Sci. Adv. 2018, 4, eaat3446. [3] C. Z. Zhao, B. C. Zhao, C. Yan et al. Energy Storage Mater. 2019, DOI: 10.1016/j.ensm.2019.07.026. [4] C. Z. Zhao and Q. Zhang. Joule 2019, 3, 1. [5] C. Z. Zhao, H. Duan, J. Q. Huang et al. Sci. China Chem. 2019, 62, 1286. [6] C. Z. Zhao, X. B. Cheng, R. Zhang et al. Energy Storage Mater. 2016, 3, 77.

Interfacial Chemistry Enables Stable Cycling of All-Solid-State Li Metal Batteries at High Current Densities

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Durable and Adjustable Interfacial Engineering of Polymeric Electrolytes for Both Stable Ni-Rich Cathodes and High-Energy Metal Anodes

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Composite Hybrid Quasi-Solid Electrolyte for High-Energy Lithium Metal Batteries

Regulating Li-Ion Migration in Solid-State Electrolytes for Li Metal Anodes

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

High‐Performance Garnet‐Type Solid‐State Lithium Metal Batteries Enabled by Scalable Elastic and Li+‐Conducting Interlayer

Asymmetric double-layer composite electrolyte with enhanced ionic conductivity and interface stability for all-solid-state lithium metal batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

A Mortise-Tenon-like Ionic/electronic Conductive Interface Facilitates Long-Cycle Solid-State Lithium Metal Batteries

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Tailoring Heterogeneous Interfacial Chemistry Enables Long-Term Cycling of All-Solid-state Lithium-Metal Batteries

In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode

Stable All-Solid-state Lithium Metal Batteries with Li3N-LiF-enriched Interface Induced by Lithium Nitrate Addition

Characterization of the structure and chemistry of the solid–electrolyte interface by cryo-EM leads to high-performance solid-state Li-metal batteries

Lithium-Rich Anti-perovskite Li 2 OHBr-Based Polymer Electrolytes Enabling an Improved Interfacial Stability with a Three-Dimensional-Structured Lithium Metal Anode in All-Solid-State Batteries

A Self‐Reconfigured, Dual‐Layered Artificial Interphase Towards High‐Current‐Density Quasi‐Solid‐State Lithium Metal Batteries

Molecule Crowding Strategy in Polymer Electrolytes Inducing Stable Interfaces for All‐Solid‐State Lithium Batteries