Abstract:Ni-based superalloy Inconel-718 is ubiquitous in metal 3D printing where high cooling rate and thermal gradient are present. These manufacturing conditions are conducive to high initial dislocation density and porosity or void in the material. This work proposes a molecular dynamics (MD) analysis method that can examine the role of dislocations, cooling rates, void, and their interactions governing the material properties and failure mechanism in Inconel-718 using Embedded Atom Method (EAM) potential. Three different structures: nanowire (NW), nanopillar, and nanoplate are used throughout this work. Initially, strain rates are varied from 10^8s^-1 to 10^10s^-1 keeping the NW diameter and temperature constant at 3.17 nm and 300K respectively. Compressive loading is applied to a 7.04 nm nanopillar by applying a constant strain rate of 109 s^-1 while temperature is varied from 100K to 700K. Different cooling rates ranging from 0.5x10^10 K/s to 1 x 10^14 K/s are applied to nanoplates (with and without a central void). The size of the central void is kept fixed at 2.12 nm. Increasing strain rates in tension not only results in strain hardening but also increase in dislocation density. Our computational method is successful to capture extensive sliding on {111} shear plane, which leads to significant necking of the alloy before fracture due to dislocation. The high cooling rates creating non-equilibrium structure leads to high strength and ductile behavior. On the other hand, the low cooling rate forming well defined crystalline structure causes low strength and brittle behavior. This brittle to ductile transition is observed solely due to cooling rate. Cooling rate may diminish the void by healing the structure during solidifications process. Subsequent mechanical properties by varying temperature and size are also presented in detail.

Effect of free surfaces on localized plastic deformation in single-crystal nickel containing helium bubbles and radiation-induced self-interstitial atom clusters

Effect of grain boundaries and rigid inclusions on plasticity in nickel bicrystals containing helium bubbles and radiation-induced self-interstitial atom clusters

Interaction Between Recrystallization and Helium Behavior in Cold-Rolled Nickel

Investigation on the deformation mechanisms and size-dependent hardening effect of He bubbles in 84 dpa neutron irradiated Inconel X-750

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Highly Pressurized Helium Nanobubbles Promote Stacking-Fault-mediated Deformation in FeNiCoCr High-Entropy Alloy

The Shock-Induced Deformation and Spallation Failure of Bicrystal Copper with a Nanoscale Helium Bubble via Molecular Dynamics Simulations

Exploring the impact of pre-existing helium bubbles on nanoindentation in tungsten through molecular dynamics simulation

Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy

Radiation-Induced Helium Nanobubbles Enhance Ductility in Submicron-Sized Single-Crystalline Copper

Intergranular Fracture Induced by Helium Bubbles Segregation in NiFe Single-Phase Concentrated Solid Solution Alloys

Atomistic simulation and continuum modeling of the dynamic tensile fracture and damage evolution of solid single crystalline Al with He bubble

Micro Defects Evolution of Nickel-Based Single Crystal Superalloys during Shear Deformation: A Molecular Dynamics Study

Modeling the helium transport and premature intergranular fracture by dislocation motion in irradiated metals

Deformation mechanisms of Inconel-718 at nanoscale by molecular dynamics

Mechanical Behavior of Copper Containing a Gas-Bubble Superlattice

Impact of a Dense Helium-Bubble Superlattice on the Deformation of Copper by Twinning

Bubble formation in helium-implanted nanostructured ferritic alloys at elevated temperatures

Atomistic simulations of the nanoindentation-induced incipient plasticity in Ni3Al crystal

Mechanism of nanoscale helium bubbles influencing dynamic tensile response of polycrystalline copper

Modeling irradiation-induced intragranular gas bubble in tungsten under external tensile loading