3D Printing of Auxetic Metamaterials with High‐Temperature and Programmable Mechanical Properties

Lei Ren,Wenzheng Wu,Luquan Ren,Zhengyi Song,Qingping Liu,Bingqian Li,Qian Wu,Xueli Zhou

DOI: https://doi.org/10.1002/admt.202101546

IF: 6.8

2022-03-10

Advanced Materials Technologies

Abstract:Advanced Materials Technologies, EarlyView.

materials science, multidisciplinary

What problem does this paper attempt to address?

4D Printing Auxetic Metamaterials with Tunable, Programmable, and Reconfigurable Mechanical Properties

Xiaozhou Xin,Liwu Liu,Yanju Liu,Jinsong Leng

DOI: https://doi.org/10.1002/adfm.202004226

IF: 19

2020-09-09

Advanced Functional Materials

Abstract:Auxetic mechanical metamaterials, which expand transversally when axially stretched, are widely used in flexible electronics and aerospace. However, these chiral metamaterials suffer from three severe limitations as a typical auxetic metamaterials: narrow strain range, non‐tunable mechanical behaviors, and fixed properties after fabrication. In this work, 4D printing chiral metamaterials with tunable, programmable, and reconfigurable properties are developed. The deformation mode transforms from bending dominated to stretching dominated under large deformation, leading to the stress–deformation (σ–λ) behavior of the auxetic metamaterials similar to those of the biomaterials ("J"‐shaped), such as tissues or organs. The programmability and reconfigurability of the developed chiral metamaterials allow mechanical behavior to change between different biomaterials with high precision. Furthermore, scaffolds with personalized mechanical properties as well as configurations and metamaterials‐based light‐emitting diode integrated devices demonstrate potential applications in tissue engineering and programmable flexible electronics.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Design of Mechanical Auxetic Metamaterial for Heterogeneous Assembly, Programmable Periodic Porous Elastomer Structures

Yuheng Liu,Dong-Wei Shu,Haibao Lu

DOI: https://doi.org/10.1142/s1758825123500576

IF: 3.5

2023-06-01

International Journal of Applied Mechanics

Abstract:With the development of metamaterials, programmable and assembled auxetic structures have attracted extensive attention due to their unusual mechanical behaviors. In this study, we design a 3D printed metamaterial structure with significantly improved stress and programmable auxetic behavior by means of the cooperativity of viscoelastic and elastic materials. The effects of porosity, temperature, the shape of pore and Young's modulus of the elastic material on the mechanical behavior of 3D printed metamaterial have been characterized using finite element method (FEM) analysis and experimental measurements. The constitutive relationships between stress, strain, porosity and the shape of pore have been formulated to explore the working principles of these parameters in the mechanical performances.

mechanics
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications

Xueli Zhou,Luquan Ren,Zhengyi Song,Guiwei Li,Jifeng Zhang,Bingqian Li,Qian Wu,Wangxuan Li,Lei Ren,Qingping Liu

DOI: https://doi.org/10.1016/j.compositesb.2023.110585

2023-02-06

Abstract:Mechanical metamaterials are a class of functional materials with designability and extraordinary mechanical properties. Due to the manufacturing limitation of traditional technology, most of the current research on mechanical metamaterials is limited to theoretical and simulation analysis. In recent years, the rapid development of 3D printing technology has provided an important means for the manufacturing of mechanical metamaterials with complex structures. In addition, the further combination with the 4D printing of smart materials is providing a boost to the development of smart programmable mechanical metamaterials. Here, we outline the recent advances in 3D/4D printing of mechanical metamaterials. First, 3D printing techniques for single-material, multi-material, and composite materials applicable to mechanical metamaterial manufacturing are discussed. Then, the structures and designs of several common mechanical metamaterials in 3D printing are summarized, including the 4D printing of smart programmable mechanical materials, and the applications of 3D/4D printing of mechanical metamaterials are presented. Finally, the future research prospects and challenges of 3D/4D printed mechanical metamaterials are foreseen.

engineering, multidisciplinary,materials science, composites
4D Printing of customizable and reconfigurable mechanical metamaterials

Luquan Ren,Qian Wu,Jianyang Li,Yulin He,Yulin Zhang,Xueli Zhou,Siyang Wu,Qingping Liu,Bingqian Li

DOI: https://doi.org/10.1016/j.ijmecsci.2024.109112

IF: 7.3

2024-02-18

International Journal of Mechanical Sciences

Abstract:Customizable and reconfigurable mechanical behavior is critical for self-adaptive low-frequency vibration isolators operating in dynamic environments. Herein, the mechanical metamaterials with customizable and configurable geometries, material stiffnesses, cushioning properties, and vibration isolation capabilities are fabricated using a 4D printed multi-material system. The metastructure is characterized by the connection of a flexural beam structure and a collapsible straw structure. At the unit level, the stiffness characteristics are analyzed by geometric and theoretical mechanical models. The effect of geometric parameters and material composition on the stiffness behavior of multi-material metamaterials is investigated. Metamaterials' customizable and configurable characteristics are examined by the quasi-static compression mechanical properties, cushion performances, and vibration isolation capabilities under varying geometric parameters and material compositions. Finally, the reprogrammable stiffness of the metamaterial is demonstrated through the modification of geometric parameters utilizing the shape memory properties in 4D printing. The customizable and configurable metamaterials inspire the next generation of cushioning and vibration isolators, holding significant promise for applications demanding superior vibration isolation performances in dynamic environments.

engineering, mechanical,mechanics
4D printed multi-stable metamaterials with mechanically tunable performance

Ran Tao,Li Xi,Wenwang Wu,Ying Li,Binbin Liao,Liwu Liu,Jinsong Leng,Daining Fang

DOI: https://doi.org/10.1016/j.compstruct.2020.112663

IF: 6.3

2020-11-01

Composite Structures

Abstract:The function of the metamaterials is determined by the configuration and spatial arrangement of the lattice microstructure. Once manufactured, the geometry and function of the metamaterials are irreversible and cannot be adapted to the environment to be variable and adjustable. This paper studies a shape-reconfigurable, functionally deployable, mechanically adjustable and reusable intelligent multi-stable metamaterial. Based on a 4D printing method that combines digital additive manufacturing technique and thermally induced shape memory polymer exhibiting significant change in modulus of elasticity, this metamaterial is created with reconfigurable, self-expandable and mechanical properties adjustable features. The macroscopic deformation and the morphology change of the lattice microstructure on the metamaterial during the compression test are analyzed using experiment and finite element method. The adjustable, selectable, and controllable for micro-lattice in the metamaterial during deformation and recovery can be achieved by microstructure gradients and composite design methods. The new micro-lattice programmable mechanical metamaterial has excellent versatility and the ability to adapt to environmental changes. This 4D printed multi-stable metamaterial has broad application prospects, such as in soft robots, smart damping interfaces, aerospace adjustable and expandable structures, and tunable function devices.

mechanics,materials science, composites
3D Printing of Flexible Mechanical Metamaterials: Synergistic Design of Process and Geometric Parameters

Nan Li,Chenhao Xue,Shenggui Chen,Wurikaixi Aiyiti,Sadaf Bashir Khan,Jiahua Liang,Jianping Zhou,Bingheng Lu

DOI: https://doi.org/10.3390/polym15234523

2023-11-24

Abstract:Mechanical metamaterials with ultralight and ultrastrong mechanical properties are extensively employed in various industrial sectors, with three-periodic minimal surface (TPMS) structures gaining significant research attention due to their symmetry, equation-driven characteristics, and exceptional mechanical properties. Compared to traditional lattice structures, TPMS structures exhibit superior mechanical performance. The mechanical properties of TPMS structures depend on the base material, structural porosity (volume fraction), and wall thickness. Hard rigid lattice structures such as Gyroid, diamond, and primitive exhibit outstanding performance in terms of elastic modulus, energy absorption, heat dissipation, and heat transfer. Flexible TPMS lattice structures, on the other hand, offer higher elasticity and recoverable large deformations, drawing attention for use in applications such as seat cushions and helmet impact-absorbing layers. Conventional fabrication methods often fail to guarantee the quality of TPMS structure samples, and additive manufacturing technology provides a new avenue. Selective laser sintering (SLS) has successfully been used to process various materials. However, due to the layer-by-layer manufacturing process, it cannot eliminate the anisotropy caused by interlayer bonding, which impacts the mechanical properties of 3D-printed parts. This paper introduces a process data-driven optimization design approach for TPMS structure geometry by adjusting volume fraction gradients to overcome the elastic anisotropy of 3D-printed isotropic lattice structures. Experimental validation and analysis are conducted using TPMS structures fabricated using TPU material via SLS. Furthermore, the advantages of volume fraction gradient-designed TPMS structures in functions such as energy absorption and heat dissipation are explored.
Mechanical behavior analyses of 4D printed metamaterials structures with excellent energy absorption ability

Wei Zhao,Chengbin Yue,Liwu Liu,Jinsong Leng,Yanju Liu

DOI: https://doi.org/10.1016/j.compstruct.2022.116360

IF: 6.3

2023-01-15

Composite Structures

Abstract:Mechanical metamaterials with immense specific energy absorption and high specific strength are extensively being applied in engineering fields, including bone tissue scaffolds, aerospace and automotive engineering. Many structural design strategies have been developed to improve their mechanical properties. The lattice metamaterials with a tremendous specific energy absorption capacity exhibit continual platform stress after initial yield and before densification. Here, combined with bionic design, we designed and fabricated a series of mechanical metamaterial with tension-dominated mechanical behavior which can assimilate enormous amounts of energy while maintaining a low density. The design strategy relied on the network construction in the periodic grid topology, which took the microstructure with several beams as the building block connecting the grid nodes. The mechanical properties can be adjusted by changing topology parameters. Additionally, the metamaterials fabricated by 4D printing technology show intelligent properties, which can jump from one mode to another under external stimulation. It was worth mentioning that the shape memory effect (SME) also endowed the material with certain self-healing properties. Excellent compressive resistance, energy absorption, shock absorption and shape memory effect suggest the application prospect in engineering fields.

mechanics,materials science, composites
3D Tiled Auxetic Metamaterial: A New Family of Mechanical Metamaterial with High Resilience and Mechanical Hysteresis

Tiantian Li,Yaning Li

DOI: https://doi.org/10.1002/adma.202309604

IF: 29.4

2024-01-08

Advanced Materials

Abstract:For artificial materials, desired properties often conflict. For example, engineering materials often achieve high energy dissipation by sacrificing resilience and vice versa, or desired auxeticity by losing their isotropy, which limits their performance and applications. To solve these conflicts, a strategy is proposed to create novel mechanical metamaterial via 3D space filling tiles with engaging key‐channel pairs, exemplified via auxetic 3D keyed‐octahedron‐cuboctahedron metamaterials. This metamaterial shows high resilience while achieving large mechanical hysteresis synergistically under large compressive strain. Especially, this metamaterial exhibits ideal isotropy approaching the theoretical limit of isotropic Poisson's ratio,1, as rarely seen in existing 3D mechanical metamaterials. In addition, the new class of metamaterials provide wide tunability on mechanical properties and behaviors, including an unusual coupled auxeticity and twisting behavior under normal compression. The designing methodology is illustrated by the integral of numerical modeling, theoretical analysis, and experimental characterization. The new mechanical metamaterials have broad applications in actuators and dampers, soft robotics, biomedical materials, and engineering materials/systems for energy dissipation. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Novel 4D-printed multi-stable metamaterials: programmability of force-displacement behaviour and deformation sequence

Mengqi Wan,Keqin Yu,Hao Zeng,Akbar A Khatibi,Meigui Yin,Huiyu Sun

DOI: https://doi.org/10.1098/rsta.2023.0366

2024-09-09

Abstract:The unique properties of metamaterials are determined by the configuration and spatial arrangement of artificially designed unit structures. However, the configuration and mechanical properties of conventional metamaterials are challenging to reverse and adjust. Based on curved beams, two types of novel three-dimensional (3D) multi-stable metamaterials with reconfigurable deformation and tunable mechanical properties are designed and fabricated using a four-dimensional (4D) printing method. The effects of temperature and curved-beam thickness on the force-displacement curves and multi-stable snapping sequence of the 3D multi-stable metamaterials are investigated by finite-element analysis (FEA) and experiments. In addition, based on the designed four-branch multi-stable metamaterials, three- and six-branched multi-stable structures are designed by changing the number of curved-beam branches. It is shown that, owing to shape memory effects, the 3D multi-stable metamaterials can realize mechanical programmability, and the multi-stable deformation sequence can be precisely regulated by varying the temperature and curved-beam thickness. These 4D-printed multi-stable metamaterials provide valuable contributions to the design of programmable multi-stable metamaterials and their applications in soft robots and intelligent structures. This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 1)'.
3D printed auxetic metamaterials with tunable mechanical properties and morphological fitting abilities

Yazhou Yuan,Suqian Ma,Xianyan Sun,Boya Chen,Yuchao Luo,Zhaohua Lin,Yunhong Liang

DOI: https://doi.org/10.1016/j.matdes.2024.113119

IF: 9.417

2024-06-27

Materials & Design

Abstract:Research on creating special structures with a negative Poisson's ratio, known as auxetic metamaterials, is widely conducted for potential applications in flexible electronics, aerospace, biomedicine, and other fields. Auxiticity is the phenomenon of transverse expansion that occurs when stretched longitudinally. However, conventional metamaterial tunable properties have certain limitations, mainly in the form of limited Poisson's ratio tuning range and transverse deformation. In this work, a series of symmetric antichiral auxetic structures with significant auxetic effect and low Poisson's ratio of −5 are designed and fabricated by 3D printing. Based on the manipulating of unit parameters and the use of shape memory polymers, the auxetic metamaterials exhibit tunable mechanical properties and programmable shape memory behaviors. Owing to these features, the auxetic metamaterials are demonstrated to achieve excellent shape-fitting and size-fitting capabilities, which are followed by expanding in a full range to contact any objects (due to auxiticity) and then contract to conform their shapes (due to shape memory). By integrating flexible electromyography(EMG) electrodes, the shape memory auxetic metamaterials can be used as self-adaptive wearable devices to fit with human limbs, which can ensure the good attachment, high signal to Noise Ratio (SNR), and breathability when collect EMG signals.

materials science, multidisciplinary
Deformation behavior and band gap switching function of 4D printed multi-stable metamaterials

Wenxia Hu,Zhiwen Ren,Zhishuai Wan,Dexing Qi,Xiaofei Cao,Zhen Li,Wenwang Wu,Ran Tao,Ying Li

DOI: https://doi.org/10.1016/j.matdes.2021.109481

2021-02-01

Abstract:Metamaterials/Phononic crystals are used to control the propagation of elastic waves/sound waves, and can be used in fields such as vibration isolation, noise reduction, stealth, focusing, and acoustic wave devices. The realization of real-time, flexible and active adjustable control of elastic waves by mechanical reconstruction of metamaterials is a current research hotspot. Here, SMP metamaterials with mechanical reconstruction and self-recovery ability are proposed. Affected by the glass transition temperature of the material, the mechanical properties of the metamaterials are related to the geometric parameters of the lattice configuration and the external temperature. The metamaterials can adaptively switch mechanical properties and shapes without continuous external excitation of the physical field. The finite element method and experiments were used to analyze the deformation and self-recovery process of the metamaterials. The results show that the metamaterial can achieve mechanical programming and response recovery, and the bandgap of the metamaterial can be greatly adjusted by changing the external temperature.

materials science, multidisciplinary
Multi-step and Elastically-stable Mechanical Metamaterials

Lianchao Wang,Julio A. Iglesias Mart´inez,Krzysztof K. Dudek,Gwenn Ulliac,Xinrui Niu,Yajun Zou,Bing Wang,Vincent Laude,Muamer Kadic

DOI: https://doi.org/10.1115/1.4066084

2024-07-31

Journal of Applied Mechanics

Abstract:Abstract Materials and structures with tunable mechanical properties are essential for numerous applications. However, constructing such structures poses a great challenge since it is normally very complicated to change the properties of a material after its fabrication, particularly in pure force fields. Herein, we propose a multi-step and elastically stable 3D mechanical metamaterial having simultaneously tunable effective Young's modulus and auxeticity controlled by the applied compressive strain. Metamaterial samples are fabricated by 3D printing at the centimetric scale, with selective laser sintering, and at the micrometric scale, with two-photon lithography. Experimental results indicate an elementary auxeticity for small compressive strains but superior auxeticity for large strains. Significantly, the effective Young's modulus follows a parallel trend, becoming larger with increasing compressive strain. A theoretical model explains the variations of the elastic constants of the proposed metamaterials as a function of geometry parameters and provides a basic explanation for the appearance of the multi-step behavior. Furthermore, simulation results demonstrate that the proposed metamaterial has the potential for designing metamaterials exhibiting tunable phononic band gaps. The design of re-usable elastically-stable multi-step metamaterials, with tunable mechanical performances supporting large compression, is made possible thanks to their delocalized deformation mode.

mechanics
Programmable Mechanical Metamaterials with Tailorable Negative Poisson's Ratio and Arbitrary Thermal Expansion in Multiple Thermal Deformation Modes

Yisong Bai,Chuanbao Liu,Yang Li,Jinxu Li,Lijie Qiao,Ji Zhou,Yang Bai

DOI: https://doi.org/10.1021/acsami.2c08270

2022-07-27

Abstract:Mechanical metamaterials pave a way for designing and optimizing microstructure topology to achieve counterintuitive deformation including negative Poisson's ratio (NPR) and negative thermal expansion (NTE). Previous studies were always limited to single anomalous mechanical or thermal deformation, but current applications for high-precision mechanical or optical equipment always require their combination and customized and anisotropic deformation parameters. This work develops programmable...

materials science, multidisciplinary,nanoscience & nanotechnology
Controllable design of bi-material metamaterials with programmable thermal expansion and Poisson's ratio

Fucong Lu,Beicheng Lin,Xiangyu Ling,Chuanbiao Zhang,Yilin Zhu

DOI: https://doi.org/10.1016/j.compstruct.2023.117417

IF: 6.3

2023-07-30

Composite Structures

Abstract:Metamaterials possess superior acoustic, thermal, and mechanical properties, making them potential candidates for scientific and engineering applications. Previous studies were mainly limited to single counterintuitive property, while current applications of high-precision machines often necessitate a combination of advanced properties, such as negative thermal expansion (NTE), light-weight and negative Poisson's ratio (NPR). In this work, two bi-material missing rib-type anti-chiral metamaterials were devised and analyzed to integrate the programmable coefficient of thermal expansion (CTE), Poisson's ratios (PR) and light-weight. The analytical solutions for the proposed metamaterials were then derived to provide guidelines for determining the geometries with targeted mechanical properties. It is shown that the proposed designs exhibit a range of special properties, including light-weight, widely programmable CTE with isotropy and stable PR performance. The analytic solutions of the CTE were further validated by numerical simulations and experimental tests. Finally, the coupling relationships among the CTE, PR and relative density were elucidated. Such an analysis of the coupled relationships is anticipated to have profound implications for the engineering community, where there is a pressing demand for materials that can meet stringent requirements of light-weight and programmable properties.

mechanics,materials science, composites
Robustly printable freeform thermal metamaterials

Wei Sha,Mi Xiao,Jinhao Zhang,Xuecheng Ren,Zhan Zhu,Yan Zhang,Guoqiang Xu,Huagen Li,Xiliang Liu,Xia Chen,Liang Gao,Cheng-Wei Qiu,Run Hu

DOI: https://doi.org/10.1038/s41467-021-27543-7

IF: 16.6

2021-12-01

Nature Communications

Abstract:Abstract Thermal metamaterials have exhibited great potential on manipulating, controlling and processing the flow of heat, and enabled many promising thermal metadevices, including thermal concentrator, rotator, cloak, etc. However, three long-standing challenges remain formidable, i.e., transformation optics-induced anisotropic material parameters, the limited shape adaptability of experimental thermal metadevices, and a priori knowledge of background temperatures and thermal functionalities. Here, we present robustly printable freeform thermal metamaterials to address these long-standing difficulties. This recipe, taking the local thermal conductivity tensors as the input, resorts to topology optimization for the freeform designs of topological functional cells (TFCs), and then directly assembles and prints them. Three freeform thermal metadevices (concentrator, rotator, and cloak) are specifically designed and 3D-printed, and their omnidirectional concentrating, rotating, and cloaking functionalities are demonstrated both numerically and experimentally. Our study paves a powerful and flexible design paradigm toward advanced thermal metamaterials with complex shapes, omnidirectional functionality, background temperature independence, and fast-prototyping capability.

multidisciplinary sciences
3D/4D printed tunable electrical metamaterials with more sophisticated structures

Dou Yang,Hui Mei,Li Yao,Wenqiang Yang,Yongtao Yao,Laifei Cheng,Litong Zhang,Konstantinos G. Dassios

DOI: https://doi.org/10.1039/d1tc02588k

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Absorbing metamaterials with more sophisticated structures printed using various 3D printers.

materials science, multidisciplinary,physics, applied
Synergistically program thermal expansional and mechanical performances in 3D metamaterials: Design-Architecture-Performance

Kaiyu Wang,Jiaxin Chen,Zhengtong Han,Kai Wei,Xujing Yang,Zhonggang Wang,Daining Fang

DOI: https://doi.org/10.1016/j.jmps.2022.105064

IF: 5.582

2022-12-01

Journal of the Mechanics and Physics of Solids

Abstract:Metamaterials, incorporating specific micro-architectures, could be purposely customized to export the programmability in both thermal expansional and mechanical performances, which are beneficial to obtain the thermal and structural stabilities in engineering devices. Here, by focusing on developing an original design strategy, multiple classes of metamaterials were devised and analyzed to integrate the programmable coefficient of thermal expansion (CTE) and mechanical performances (relative density, stiffness and strength). In detail, firstly, a series of the bi-material metaunits was devised, and a vector analysis method was proposed to analytically identify the CTE tensors. Then, an original design strategy, i.e., matrix transformation method, was developed to systematically devise multiple classes of 3D metamaterials with the unidirectional, transversal isotropic and isotropic CTEs. Besides, the mechanical performances, including the relative density, stiffness and strength, were theoretically established. It was identified that these metamaterials well balanced the directionality and programmability of the CTEs. Most importantly, by modulating the geometrical parameters, the desirable CTEs, light weight, high stiffness and strength could be synergistically achieved in these metamaterials. Eventually, a principle was established to guide the development of metamaterials. That was the original design strategy acted as the underlying foundation to map the specific architectures in metamaterials, correspondingly, to build the ability to synergistically program or customize the thermal expansional and mechanical performances.

mechanics,materials science, multidisciplinary,physics, condensed matter
An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance

Mehran Mojaver,Taher Azdast,Rezgar Hasanzadeh

DOI: https://doi.org/10.1002/pat.6298

IF: 3.348

2024-02-04

Polymers for Advanced Technologies

Abstract:Metamaterials are specifically designed materials that possess unique properties that cannot be found in naturally occurring substances. These remarkable materials have the capability to bring about a significant transformation across a wide range of industries. Auxetic structures are a recent area of research possess a distinctive characteristic known as a negative Poisson's ratio. Unlike conventional materials that contract when stretched, auxetic structures actually expand in two dimensions. In this study, a new auxetic structure was introduced, and thermoplastic polyurethane samples were 3D printed using a fused filament fabrication method. The samples are then subjected to strains ranging from 5% to 50% and Poisson's ratios are measured both experimentally and numerically using finite element method in Ansys software. By comparing the results of the experimental research and simulation, it is evident that applying strains within this range causes the Poisson's ratio of the samples to change from −0.81 to −0.14 and it showed that the newly introduced structure is auxetic. According to the analysis of root mean square error, the hexagonal mesh with a size of 0.7 mm consistently produced the most accurate results, aligning closely with the experimental sample. Given that this is an entirely novel auxetic structure within the category of arrow‐head auxetic structures, there is potential for future research to be conducted in order to further develop and enhance this model.

polymer science
Architectural Design and Additive Manufacturing of Mechanical Metamaterials: A Review

Chenxi Lu,Mengting Hsieh,Zhifeng Huang,Chi Zhang,Yaojun Lin,Qiang Shen,Fei Chen,Lianmeng Zhang

DOI: https://doi.org/10.1016/j.eng.2021.12.023

IF: 12.834

2022-05-31

Engineering

Abstract:Mechanical metamaterials can be defined as a class of architected materials that exhibit unprecedented mechanical properties derived from designed artificial architectures rather than their constituent materials. While macroscale and simple layouts can be realized by conventional top-down manufacturing approaches, many of the sophisticated designs at various length scales remain elusive, due to the lack of adequate manufacturing methods. Recent progress in additive manufacturing (AM) has led to the realization of a myriad of novel metamaterial concepts. AM methods capable of fabricating microscale architectures with high resolution, arbitrary complexity, and high feature fidelity have enabled the rapid development of architected metamaterials and drastically reduced the design-computation and experimental-validation cycle. This paper first provides a detailed review of various topologies based on the desired mechanical properties, including stiff, strong, and auxetic (negative Poisson's ratio) metamaterials, followed by a discussion of the AM technologies capable of fabricating these metamaterials. Finally, we discuss current challenges and recommend future directions for AM and mechanical metamaterials.

engineering, multidisciplinary

3D Printing of Auxetic Metamaterials with High‐Temperature and Programmable Mechanical Properties

4D Printing Auxetic Metamaterials with Tunable, Programmable, and Reconfigurable Mechanical Properties

Design of Mechanical Auxetic Metamaterial for Heterogeneous Assembly, Programmable Periodic Porous Elastomer Structures

Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications

4D Printing of customizable and reconfigurable mechanical metamaterials

4D printed multi-stable metamaterials with mechanically tunable performance

3D Printing of Flexible Mechanical Metamaterials: Synergistic Design of Process and Geometric Parameters

Mechanical behavior analyses of 4D printed metamaterials structures with excellent energy absorption ability

3D Tiled Auxetic Metamaterial: A New Family of Mechanical Metamaterial with High Resilience and Mechanical Hysteresis

Novel 4D-printed multi-stable metamaterials: programmability of force-displacement behaviour and deformation sequence

3D printed auxetic metamaterials with tunable mechanical properties and morphological fitting abilities

Deformation behavior and band gap switching function of 4D printed multi-stable metamaterials

Multi-step and Elastically-stable Mechanical Metamaterials

Programmable Mechanical Metamaterials with Tailorable Negative Poisson's Ratio and Arbitrary Thermal Expansion in Multiple Thermal Deformation Modes

Controllable design of bi-material metamaterials with programmable thermal expansion and Poisson's ratio

Robustly printable freeform thermal metamaterials

3D/4D printed tunable electrical metamaterials with more sophisticated structures

Synergistically program thermal expansional and mechanical performances in 3D metamaterials: Design-Architecture-Performance

An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance

Architectural Design and Additive Manufacturing of Mechanical Metamaterials: A Review